Hãng sản xuất | Alcatel-Lucent |
Part number | OAW-4306GW-9 |
Quản lý access point - Controlled APs | 16 |
Users: | 256 |
Gigabit Ethernet ports (10/100/1000) | 8 |
Các cổng hỗ trợ khác | • RJ45 |
Thông lượng tường lửa - Firewall throughput | 2Gbps |
Tốc độ mã hóa (3DES) | 1.6Gbps |
Tốc độ mã hóa (AES-CCM) | 800Mbps |
MAC addresses | 2048 |
Mô tả chi tiết | Bundled with eight access point (AP) licenses (for external APs)
The Alcatel-Lucent OmniAccess™ 4306G Branch Ofice WLAN switch is compact, cost effective and support the identical advanced wireless services that a campus WLAN switch offers. In addition, the OmniAccess 4306G goes beyond pure wireless services by providing built-in print and ile servers and secured Ethernet connectivity. The OmniAccess wireless centralized coniguration and management model enables the OmniAccess 4306G to be deployed, monitored, and controlled without any local IT staff.
The OmniAccess 4306G supports eight Gigabit Ethernet ports with PoE+ capability, four USB ports, and all the advanced wireless services that the larger OmniAccess WLAN switches provide. The OmniAccess 4306G offers leading edge VoWLAN capabilities, which make them ideal for deployment of Alcatel-Lucent IP Touch™ Wireless LAN handsets, dual mode smart phones and mobile communication applications. The OmniAccess 4306G is also the first OmniAccess WLAN switches with 3G capability. The 3G link can be used to connect to the Internet, to connect back to a centralized WLAN switch or as a back-up connection.
WLAN switch performance and capacity
• External LAN-connected access points (maximum): 16
• Internal access point (OmniAccess 4306GW only): 1
• Remote access points (maximum): 64
Interfaces
• Console (RS-232) RJ-45: 1
• Gigabit Ethernet (10/100/1000Base-T): 2
• Gigabit Ethernet (10/100/1000Base-T) with PoE+: 4
• Gigabit Ethernet pluggable (1000Base-X SFP): 2
• ExpressCard®: 1
• USB 2.0: 4
Power specifications
• AC input voltage: 100-240 V, Universal Input
• AC input frequency: 50-60 Hz
• Maximum power consumption: 126 Watts
• Power over Ethernet total capacity: 78 Watts
• Power over Ethernet capacity per port: 19.5 Watts
Wireless radio specifications (OmniAccess 4306GW internal access point)
• Access point (AP) type: 2x3, 3x3 multiple-input and multiple-output (MIMO)
• Operating frequency: 2.4-2.5 GHz or 5.150-5.950 GHz
• Available channels: WLAN switch managed, dependent upon configured regulatory domain
• Modulations:
¬ 802.11b: Direct-sequence spread-spectrum (DSSS)
¬ 802.11a/g: Orthogonal frequency division multiplexing (OFDM)
¬ 802.11n: 802.11n draft 2.0
• Transmit power: Configurable in increments of 0.5 dBm
• Association rates (Mbps):
¬ 802.11b: 11, 5.5, 2, 1 with automatic fallback
¬ 802.11a/g: 54, 48, 36, 24, 18, 12, 9, 6 with automatic fallback
¬ 802.11n: MCS0 - MCS15 (6.5Mbps – 300Mbps)
¬ 802.11n high-throughput (HT) Support: HT 20/40
¬ 802.11n packet aggregation: A-MPDU, A-MSDU
Antenna (OmniAccess 4306GW internal access point)
• Three reverse polarity SMA (RP-SMA) interfaces for external antenna support (supports up to 3x3 MIMO with spatial diversity)
• Three AP-ANT-1B omni-directional dual-band antennas included
Access point operating mode (OmniAccess 4306GW internal access point)
• Branch office 802.11a/n or b/g/n WLAN
• 802.11a/b/g/n air monitor
• Hybrid combination of WLAN/AM
• Remote AP
• Mesh portal
• Configurable to support 802.11n draft 2.0 HT 20/40 channels or mixed-mode deployment IEEE 802.11a/b/g/n
Regulatory and safety compliance – OmniAccess 4306GW
• FCC 15.247/15.407
• EU R&TTE Directive 1999/5/EC (EN 300 328, EN 301 893, EN 301 489)
• EU LV Directive 2006/95/EC
• IEC/EN 60950
• CE Marking
• cTUVus Marked
• CB Scheme Certified |
Kích thước (mm) | 38x346x226 |
Trọng lượng (g) | 2200 |
Nguồn điện | 100-240 V / 50-60 Hz |