Server Supermicro SuperServer 2028U-TRTP+ (Black) (SYS-2028U-TRTP+) E5-2699 v4 (Intel Xeon E5-2699 v4 2.20GHz, RAM 8GB, 1000W, Không kèm ổ cứng)

Mô tả sản phẩm: Server Supermicro SuperServer 2028U-TRTP+ (Black) (SYS-2028U-TRTP+) E5-2699 v4 (Intel Xeon E5-2699 v4 2.20GHz, RAM 8GB, 1000W, Không kèm ổ cứng)

Product SKUs SYS-2028U-TRTP+ SuperServer 2028U-TRTP+ (Black)   Motherboard Super X10DRU-i+   Processor/Cache CPU Intel® Xeon® processor E5-2600 v4†/ v3 family (up to 160W TDP) * Dual Socket R3 (LGA 2011) Cores / Cache Up to 22 Cores† / Up to 55MB† Cache System Bus QPI up to 9.6 GT/s Note † BIOS version 2.0 or above is required Note * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization.   System Memory Memory Capacity 24x 288-pin DDR4 DIMM slots Up to 1.5TB ECC LRDIMM, RDIMM Memory Type 2400†/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit DIMM Sizes 64GB, 32GB, 16GB, 8GB, 4GB Memory Voltage 1.2 V Error Detection Corrects single-bit errors   On-Board Devices Chipset Intel® C612 chipset SATA SATA3 (6Gbps) with RAID 0, 1, 5, 10 IPMI Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support ASPEED AST2400 BMC Network Connectivity 2x 10G SFP+ ports via AOC-2UR68-i2XS Intel® 82599ES 10G SFP+ 1x Realtek RTL8211E PHY (dedicated IPMI) Graphics ASPEED AST2400 BMC   Input / Output SATA 10x SATA3 (6Gbps) ports SAS 24x SAS3 ports support via optional Add-on Cards LAN 2x 10G SFP+ ports 1x RJ45 Dedicated IPMI LAN port USB 5x USB 3.0 ports (2 rear, 2 onboard header, 1 Type A) Video 1x VGA Connector Serial Port / Header 1x Serial header DOM 2x SuperDOM (Disk on Module) ports   System BIOS BIOS Type 128Mb SPI Flash EEPROM with AMI BIOS BIOS Features Plug and Play (PnP) APM 1.2 PCI 2.3 ACPI 1.0 / 2.0 / 3.0 / 4.0 USB Keyboard support SMBIOS 2.7.1 UEFI 2.3.1   Management Software SuperDoctor® 5 Intel® Node Manager 3.0 Watch Dog NMI SUM and SSM Optional IPMI 1.5 / 2.0 Power Configurations ACPI Power Management Power-on mode for AC power recovery

Chassis Form Factor 2U Rackmount Model CSE-219UAC-R1K02   Dimensions and Weight Width 17.2" (437mm) Height 3.5" (89mm) Depth 27.76" (705.3mm) Weight Net Weight: 36 lbs (16.4 kg) Gross Weight: 72 lbs (32.7 kg) Available Colors Black   Front Panel Buttons Power On/Off button System Reset button UID button LEDs Power status LED HDD activity LED 2x Network activity LEDs System information (overheat/UID) LED   Expansion Slots PCI-Express 1x PCI-E 3.0 x16 slot (FH, 10.5" L) 7x PCI-E 3.0 x8 slots (5x FH, 10.5" L, 1x LP, 1x Internal LP)                 (Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram and AOC Support for details.)   Drive Bays Hot-swap 24x Hot-swap 2.5" Drive Bays: 10x SATA3 ports by default Optional drive support: 24x SAS3                 Note: optional storage card is required to support more than 10 drives.   Backplane 2U SAS3 backplane   System Cooling Fans 4x 8cm heavy duty PWM fans   Power Supply with Digital Switching Control 1000W Redundant Titanium Level (96%) Single Output Power Supplies AC Input 100-127 V, 50-60 Hz 200-240 V, 50-60 Hz +12V Max: 62.5A & Min: 0A (100Vac-127Vac) Max: 83A (200Vac-240Vac) & Min: 0A 12V SB Max: 2.1A Min: 0A Certification     Titanium Level     [ Test Report ]   PC Health Monitoring Voltage Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages. 5+1 Phase-switching voltage regulator FAN 8x 4-pin fan headers Status monitor for speed control Pulse Width Modulated (PWM) fan connectors Temperature Support to monitor Supermicro AOC temperatures from IPMI or SD 5 Monitoring for CPU and chassis environment CPU thermal trip support Thermal Control for 8x Fan Connectors Thermal Monitor 2 (TM2) support PECI LED Memory DIMM ECC error LEDs CPU / System Overheat LED Suspend static indicator LED UID/Remote UID Other Features 4x 8-pin GPU power connectors Chassis intrusion detection Chassis intrusion header SDDC Support RoHS   Operating Environment / Compliance RoHS RoHS Compliant Environmental Spec. Operating Temperature:    10°C to 35°C (50°F to 95°F) Non-operating Temperature:    -40°C to 60°C (-40°F to 140°F) Operating Relative Humidity:    8% to 90% (non-condensing) Non-operating Relative Humidity:    5% to 95% (non-condensing)