| Model |
| Hãng sản xuất | ELID |
| Thông số kỹ thuật |
| Kiểu máy | Chấm công bằng thẻ cảm ứng |
| Kiểu lắp đặt | • Treo tường |
| Chức năng | • Lưu điện • Màn hình LCD • Chuông báo giờ |
| Cổng kết nối | • Máy tính • RS232 • USB • TCP/IP • RS-485 |
| Đặc điểm khác | ET630 Time Recording Terminal
ET630 is a versatile Time Recording Terminal with basic access control features and user friendly interface. Its elegant and compact design blends in well with office environment.
Database Capacity
ET630 provides following storage capacity:
- Transaction database - 6000 transactions
- Card database - 500 cards
User Friendly -
ET630 is easy to install, program and use. It has a 4x4 matrix membrane keypad with feather-touch keys for users to key in data or selection. A large backlight graphical LCD display gives precise information to users of equipment status and what data is needed to be keyed in from the user. The programming menus are simple and easy to understand and requires minimum of setup time/configuration to keep the equipment up and running.
Networking to PC
For small offices requiring just one unit of ET630, it can be directly linked to PC's via a RS485 cable which is supplied with the unit. For larger offices, up to 16 units of ET630 can be connected together using RS485 bus, and the units can be located up to 1 km apart.
Built-in Reader
ET630 has a built-in EM Proximity Reader.
Large Memory
ET630 is provided with a large memory (256K-bit EEPROM) to back up transaction records. This memory is non-volatile, meaning that data stored inside the memory will not be affected when there is power outage.
Onboard Back-Up Battery
ET630 has a calendar clock with onboard back-up battery and will continue to run for more than 12 months even when AC supply is cut off.
Basic Access Control Features
ET630 has basic access control function. The relay output from ET630 can be connected to an electric lock for access control. When a valid card is read, this relay will activate.
Firmware Upgrade
ET630 uses a reliable 8-bit microcontroller, with firmware stored in Flash Memory. The firmware can be updated in-circuit, through serial download from PC.
Database Mode
ET630 is operated in 3 types of database:
- Access Database Cards (White) - Only the cards installed in the database are valid cards.
- Decline Database Cards (Black) - Only the cards installed in the database are invalid cards.
- Access All Cards (Normal) - All cards are valid cards |
| Xuất xứ | Malaysia |
