Máy hiện sóng Lecroy HDO6034 (350Mhz, 2.5Gsa/s, 4 Ch)

Hãng sản xuất: Teledyne LeCroy - USA
Model: HDO6034
Bảo hành : 24 tháng

Băng thông : 350Mhz
Số kênh : 4
Lấy mẫu : 2.5Gsa/s
Rise time : 1ns
Trở kháng : 1 MΩ ± 2.0% || 15 pF, 50 Ω ± 2.0%
Điện áp max : 50 Ω: 5 Vrms, 1 MΩ: 400 V max
Độ phân giải : 12 bit HD
Độ nhạy : 50 Ω: 1 mV/div–1 V/div;  1 MΩ: 1 mV–10 V/div
Bộ nhớ : 50 Mpts/Ch
Màn hình : 12.1" WXGA Touch Display
Giao tiếp : GPIB, LAN, USB...
Nguồn : 100–240 VAC ±10% at 45–66 Hz;

 

---

Vertical System
Rise Time (typical, 10-90%, 50 Ω)	1 ns (typical)
Bandwidth	350 MHz
Analog Bandwidth (Max)	350 MHz
Analog Bandwidth @ 50 Ω (-3 dB) (1.85mm Inputs)	Not Applicable
Analog Bandwidth @ 50 Ω (-3 dB) (2.4/2.92mm Inputs)	Not Applicable
Analog Bandwidth @ 50 Ω (-3 dB) (ProLink Input)	Not Applicable
Analog Bandwidth @ 50 Ω (-3 dB) (ProBus Input)	350 MHz (≥1 mV/div)
Analog Bandwidth @ 1 MΩ (-3 dB) (ProBus Input)	350 MHz (typical)
Input Channels	4
Bandwidth Limiters	20MHz, 200MHz
Input Impedance	1 MΩ ± 2.0% || 15 pF, 50 Ω ± 2.0%
Input Coupling	1 MΩ: AC, DC, GND; 50 Ω: DC, GND
Maximum Input Voltage	50 Ω: 5 Vrms, 1 MΩ: 400 V max (DC + Peak AC ≤ 10 Khz)
Channel-Channel Isolation	> 1000:1 up to rated BW
Vertical Resolution	12-bits
Sensitivity	50 Ω: 1 mV–1 V/div, fully variable; 1 MΩ: 1 mV–10 V/div, fully variable
DC Gain Accuracy	±(0.5%) Full Scale, offset at 0 V
Offset Range	50Ω +/-1.6V: 1mV/div-4.95mV/div +/-4V: 5mV/div-9.9mV/div +/-8V: 10mV/div-19.8mV/div +/-10V: 20mV/div-1V/div 1MΩ +/-1.6V: 1mV/div-4.95mV/div +/-4V: 5mV/div-9.9mV/div +/-8V: 10mV/div-19.8mV/div +/-16V: 20mV/div-100mV/div +/-80V: 102mV/div-198mV/div +/-160V: 200mV/div-1V/div +/-400V: 1.02V/div-10V/div
Offset Accuracy	+/-(1.0% of offset value + 0.5%FS + 0.02% of max offset + 1mV)
Horizontal System
Timebases	Internal timebase common to 4 input channels; an external clock may be applied at the auxiliary input
Time/Division Range	20 ps/div - 5 ks/div with standard memory (up to 10 ks/div with -L memory, 25 ks/div with -XL memory) RIS available at ≤ 10 ns/div; Roll Mode available at ≥ 100 ms/div and ≤ 5 MS/s
Clock Accuracy	+/-2.5ppm for 5 to 40C + 1.0ppm/year from calibration
Jitter Noise Floor	700fs
Sample Rate and Delay Time Accuracy	Equal to Clock Accuracy
Trigger and Interpolator Jitter	≤ 3.5 psrms (typical) <0.1 psrms (typical, software assisted)
Channel-Channel Deskew Range	±9 x time/div. setting, 100 ms max., each channel
External Timebase Reference (Input)	10MHz +/-25ppm at 0 to 10dBm into 50Ohms
External Timebase Reference (Output)	10MHz 2 +/-1 dBm sinewave synchronous to scope timebase
External Clock	Input on Aux In DC-100MHz Samples on Rising Edge Threshold range: ECL, TTL, 0 ECL:Threshold:-1.3V, Amplitude>=150mV P-P TTL: Threshold:+1.6V, Amplitude >=1.8V P-P 0V: Threshold: 0V, Amplitude>=150mV P-P
Acquisition System
Sample Rate	2.5 GS/s on 4 Ch
Single-Shot Sample Rate/Ch	2.5 GS/s on 4 Ch
Random Interleaved Sampling (RIS)	125 GS/s, user selectable for repetitive signals (20 ps/div to 10 ns/div)
Maximum Trigger Rate	1,000,000 Triggers/sec (in Sequence Mode, up to 4 channels)
Intersegment Time	1 usec.
Memory Options (4 Ch / 2 Ch / 1Ch)	L- Option: 100M / 100M / 100M (60,000) XL - Option: 250M / 250M / 250M (65,000)
Standard Memory (4 Ch / 2 Ch / 1Ch) (Number of Segments)	50M/50M/50M (30,000)
Maximum Acquisition Memory Points/Ch (4 Ch / 2 Ch)	250 Mpts on all 4 channel