Máy hiện sóng Lecroy WaveRunner 610Zi (1Ghz, 10Gsa/s, 4 Ch)

Hãng sản xuất: Teledyne LeCroy - USA
Model: WaveRunner 610Zi
Bảo hành : 24 tháng

Băng thông : 1Ghz
Số kênh : 4
Lấy mẫu : 10Gsa/s
Rise time : 375ps
Trở kháng : 1 MΩ || 17 pF
Điện áp max : 50 Ω: 5V RMS ± 10V peak; 1 MΩ: 400 V max
Độ phân giải : 8 bit
Độ nhạy : 50 Ω: 1 mV/div–1 V/div;  1 MΩ: 1 mV–10 V/div
Bộ nhớ : 16Mpts/Ch
Màn hình : 12.1 WXGA Color Display
Giao tiếp : GPIB, LAN, USB...
Nguồn : 100–240 VAC ±10% at 45–66 Hz; 

---

Nominal Analog Bandwidth @ Ω 50 10 mV-1 V/div	1 GHz (≥2 mV/div)
Rise Time (10–90%)	375 ps (typical)
Rise Time (20–80%)	280 ps (typical)
Input Channels	4
Bandwidth Limiters	20MHz, 200MHz
Input Impedance	50 Ω±2% or 1 MΩ||17pF, 10 MΩ || 9.5 pF with supplied Probe
Maximum Input Voltage	50 Ω: 5V RMS ± 10V peak 1 MΩ: 400 V max. (DC + peak AC < 10 kHz)
Channel-Channel Isolation	> 100:1 up to rated BW
Vertical Resolution	8 bits; up to 11 bits with enhanced resolution (ERES)
Sensitivity	50 Ω:1 mV/div - 1 V/div, fully variable 1 MΩ: 1 mV/div - 10 V/div, fully variable
DC Vertical Gain Accuracy (Gain Component of DC Accuracy)	±1% F.S. (typical), offset at 0V; ±1.5% F.S. (test limit), offset at 0V
Offset Range	50 Ω: ±1.6 V @ 2 mV - 4.95 mV ±4 V @ 5mV - 9.9 mV ±8 V @ 10mV - 19.8 mV ±10 V @ 20mV - 1V 1 MΩ: ±1.6 V @ 2 mV - 4.95 mV ±4 V @ 5mV - 9.9 mV ±8 V @ 10mV - 19.8 mV ±16 V @ 20mV - 140 mV ±80 V @ 142mV - 1.4 V ±160 V @ 1.42mV - 10V
DC Vertical Offset Accuracy	±(1.5% of offset setting +1% of full scale + 1 mV) (test limit)
Horizontal System
Clock Accuracy	≤1.5 ppm +(aging of 0.5 ppm/yr from last calibration)
Trigger and Interpolator Jitter	≤ 3.5 psrms (typical) <0.1 psrms (typical, software assisted)
External Clock	DC to 100 MHz; (50 Ω/1 MΩ), EXT BNC input, Minimum rise time and amplitude requirements apply at low frequencies.
Acquisition System
Single-Shot Sample Rate/Ch	10 GS/s on 4Ch 20 GS/s on 2 Ch
Memory Options (4 Ch / 2 Ch / 1Ch)	S-32 Option: 32M / 64M / 64M (15,000) M-64 Option: 64M / 128M / 128M (15,000)
Standard Memory (4 Ch / 2 Ch / 1Ch) (Number of Segments)	16 M / 32 M / 32M (4,500)
Acquisition Processing
Enhanced Resolution (ERES)	From 8.5 to 11 bits vertical resolution
Triggering System
Trigger Sensitivity with Edge Trigger ProBus Inputs	2 div @ < 1 GHz 1.5 div @< 500 MHz 1 div @ < 200 MHz 0.9 div @<10 MHz (DC, AC, and LFRej coupling, ≥ 10 mV/div, 50 Ω)
External Trigger Sensitivity, (Edge Trigger)	2 div @ 1 GHz 1.5 div @ < 500 MHz 1 div @ <200 MHz 0.9 div @<10 MHz (DC, AC, and LFRej coupling)
Max. Trigger Frequency, SMART Trigger	1.0 GHz @ ≥ 10 mV/div (minimum triggerable width 750 ps)
High Speed Serial Protocol Triggering
Data Rates	320 Mb/s - 3 Gb/s
Pattern Length	80 bits, NRZ or 8b10b
Clock Recovery Jitter	1 ps rms + 0.3% Unit Interval rms for PRBS data patterns with 50% transition density
Hardware Clock Recovery Loop BW	PLL Loop BW = Fbaud/5500, 100 Mb/s to 2.488 Gb/s (typical)
LeCroy WaveStream™ Fast Viewing Mode
Max Sampling Rate	10 GS/s (20 GS/s when interleaved)
Auxiliary Input
Max. Input Voltage	50 Ω: 5 Vrms; 1 MΩ: 250 Vmax (DC + Peak AC ≤ 10 kHz)