Máy sốc tim Philips HeartStart FR3 AED

Models

861388 (text display)
861389 (ECG and text display)
Supplied with AED, primary battery (1), SMART Pads III (1 set), printed instructions (Setup Guide) and CD-ROM (Administrative Reference)

Waveform

SMART biphasic Truncated Exponential waveform parameters adjust as a function of patient impedance. Adult nominal peak current 32A (150J into a 50 ohm load); pediatric nominal peak current 19A (50J into a 50 ohm load) using optional Infant/Child Key

Shock delivery

Via defibrillator pads placed in the anterior-anterior (Lead II) position for adults; anterior-posterior position for infants and children under 55 lbs (25 kg) or 8 years old

Controls

On/Off button, shock button, option buttons. Auto-On feature, when used with the optional FR3 carry case, enables FR3 to power up when case lid is opened

Indicators

High-resolution color LCD, beeper, voice prompts, tones and chirps, audio speaker, connector socket, ready light, shock button

Advanced Mode

Configurable using optional HeartStart Configure software

Screen

LCD color display, 320 x 240 pixels. 2.8" x 2.1" (7.2 cm x 5.4 cm)

Bandwidth

1 Hz to 30 Hz (-3dB), nominal (non-diagnostic)

Monitored Lead

Lead II using anterior-anterior adult pads placement

Size

2.7" high x 5.3" wide x 8.7" deep (6.9 cm x 13.5 cm x 22.1 cm)

Weight

3 lbs 8 oz (1.6 kg) with FR3 standard battery installed

Sealing

Meets IEC529 class IP55 with battery installed

Temperature

Operating/standby: 32°–122°F (0°– 50°C)

Altitude

0 –15,000 feet (0 –4,572 meters)

Shock/drop

Meets MIL-STD-810F 516.4, Procedure IV

Abuse tolerance

After a ibe-meter drop to any edge, corner, or surface in standby mode

Vibration

Meets MIL-STD-810F 514.5 C-17

Patient Impedance Range

Minimum: 15 ohm (internal defibrillation); 25 ohm (external defibrillation)
Maximum: 180 ohm

AED Mode

Shock advisory sensitivity and specificity meet AAMI DF-39 guidelines

Function

Transmit retrospective event data or configuration setting wirelessly

ECG analysis

Evaluates impedance of defibrillator pads for proper contact with patient skin, evaluates the ECG rhythm and signal quality to determine if a shock is appropriate; also detects artifact and pacemaker

SMART CPR

Evaluates key characteristics of the presenting VF and determines the initial therapy: shock first, or CPR first quickly followed by a shock

Sensitivity/specificity

Meets AAMI DF80 requirements and AHA recommendations for adult defibrillation

Quick Shock

Typically arms in <8 seconds from the end of the "Stop CPR" prompt

Type

12 VDC, 4.7 Ah, lithium manganese dioxide long-life primary cells

Capacity

Typically 300 shocks or 12 hours of operating time at 77° F (25° C) when configured for monitoring after No Shock Advised (NSA)

Standby life

3 years minimum when stored under standby environmental conditions (battery installed)

Shelf life

5 years

Applications

Disposable, multifunction defibrillation pads for adult or infant/child patients. Time-saving peel and place pads can be removed from packaging and stored in the FR3 carry case. Pads can be preconnected to FR3, which enables testing during FR3's routine self-test.

Function

Selects therapy for infants or children under 55 lbs (25 kg) or 8 years old

Function

Stores a minimum of 8 hours of ECG, event, and if configured, voice recording. Can also be used for configuring FR3.

Automatic self-tests

Test internal circuitry, waveform delivery system, ECG acquisition, temperature, status (or readiness) of attached accessories (SMART Pads III and FR3 data card) and battery

Automated self-test frequency

Daily, weekly, monthly, power on, and runtime during all modes of operation

User initiated tests

Automatic self-tests plus tone, display, and button performance

Function

Places FR3 into a scenario-based training mode and simulates shock therapy

Type

10.8 Volt, 4.5 Ah Li-ion battery