Hóa chất cấy thép Sika AnchorFix 3001

Sika AnchorFix-3001 is a two component, pure epoxy anchoring adhesive. Using high quality, VOC- and styrene-free technology, Sika AnchorFix 3001 has been specifically design to provide a high-strength, user-friendly and versatile adhesive for use in dry, wet or flooded conditions and on or into numerous base materials. The anchoring adhesive is suitable for medium and heavy loads in both structural and non-structural applications.

Where to Use

• Anchoring of rebar or threaded rods in solid concrete, masonry, brick, block and stone.
• Grouting horizontally, vertically and overhead (refer to Limitations), where slow-setting
  allows extended working time.
• Suitable for deeper and scattered holes or applications where a fast-turnaround is not
  needed.
• Suitable for use as a ‘pick-proof’ sealant in secure or holding suites and similar
  facilities.
• Grouting in external environments and where applications are subject to dynamic
  loads and vibrations.
• Anchoring structural steel to concrete, safety barriers, balcony stanchions, canopies,
  signs, hand rails, racking, machinery, masonry supports, stadium seats, reinforcing
  and starter bars. 

Advantages

• Supplied as 1:1 ratio in side by side cartridges.
• Styrene- and VOC- free
• Versatile material allows application as adhesive and anchoring gel.
• Sets up in dry, wet or flooded conditions.
• Cures down to 0°C (32°F) when material is conditioned to 5°C (41°F).
• Cures without exhibiting expansion pressures.
• Extended open and gel times accommodate anchoring in deep and scattered holes.
• Permits anchors close to free edges.
• Suitable for chemical anchors, threaded bars and reinforcing steel.
• Performs in both cracked and non-cracked concrete
• Resistant to a wide range of chemicals, including aqueous solutions of aluminum
  chloride at saturation, aluminium nitrate at 10% concentration, jet fuel, diesel fuel,
  domestic kerosene and many other substances at 75°C (167°F) while retaining at
  least 80% of physical values.(See Chemical Resistance Guide).
• Supports high loads