Mô tả sản phẩm: Sunx FX-301
| Type | Standard type | ||||
| Red LED | Blue LED | Green LED | Infrared LED | ||
| Model No. | NPN output | FX-301 | FX-301B | FX-301G | FX-301H |
| PNP output | FX-301P | FX-301BP | FX-301GP | FX-301HP | |
| Supply voltage | 12 to 24 V DC ± 10 % Ripple P-P 10 % or less | ||||
| Power consumption | <Red LED / Infrared LED type> Normal operation: 960 mW or less (Current consumption 40 mA or less at 24 V supply voltage) ECO mode: 600 mW or less (Current consumption 25 mA or less at 24 V supply voltage) <Blue LED / Green LED type> Normal operation: 720 mW or less (Current consumption 30 mA or less at 24 V supply voltage) ECO mode: 430 mW or less (Current consumption 18 mA or less at 24 V supply voltage) |
||||
| Output | <NPN output type> NPN open-collector transistor ・Maximum sink current:100 mA (50 mA, if five, or more, amplifiers are connected in cascade.) ・Applied voltage: 30 V DC or less (between output and 0 V) ・Residual voltage: 1.5 V or less [at 100 mA (at 50 mA, if five, or more, amplifiers are connected in cascade) sink current.] <PNP output type> PNP open-collector transistor ・Maximum source current: 100 mA (50 mA, if five, or more, amplifiers are connected in cascade.) ・Applied voltage: 30 V DC or less (between output and +V) ・Residual voltage: 1.5 V or less [at 100 mA (at 50 mA, if five, or more, amplifiers are connected in cascade) source current.] |
||||
| Output operation | Selectable either Light-ON or Dark-ON, with jog switch | ||||
| Short-circuit protection | Incorporated | ||||
| Response time | 65 μs or less [H-SP (Red LED type only)], 150 μs or less (FAST), 250 μs or less [STD / S-D (Red LED type only)], 2 ms or less (LONG), selectable with jog switch |
||||
| Sensitivity setting | 2-level teaching / Limit teaching / Manual adjustment / Full-auto teaching / Max. sensitivity teaching |
||||
| Operation indicator | Orange LED (lights up when the output is ON) | ||||
| Stability indicator | Green LED (lights up under stable light received condition or stable dark condition) |
||||
| MODE indicator | RUN: Green LED, TEACH ・ ADJ ・ L/D ON ・ TIMER ・ PRO: Yellow LED | ||||
| Digital display | 4 digit red LED display | ||||
| Fine sensitivity adjustment function | Incorporated | ||||
| Timer function | Incorporated with variable ON-delay / OFF-delay / ONE SHOT timer, switchable either effective or ineffective. [Timer period: Red LED type; 0.5 ms approx., 1 to 9999 ms (Blue LED, Green LED, Infrared LED type; approx. 0.5 to 500 ms)] |
||||
| Light emitting amount selection function |
Incorporated (Red LED type only) (Note 3) FAST, STD, LONG: 4 level, H-SP: 3 level, S-D: 2 level |
||||
| Automatic interference prevention function |
Incorporated (Up to four sets of fiber heads can be mounted close together. However, H-SP mode is 2 fiber heads.) (Note 4) |
||||
| Ambient temperature | -10 to +55 ℃ +14 to -131 ℉ (If 4 to 7 units are connected in cascade: -10 to +50 ℃ +14 to +122 ℉, if 8 to 16 units are connected in cascade: -10 to +45 ℃ +14 to +113 ℉) (No dew condensation or icing allowed), Storage: -20 to +70 ℃ - 4 to +158 ℉ | ||||
| Ambient humidity | 35 to 85 % RH, Storage: 35 to 85 % RH | ||||
| Ambient illuminance | Incandescent light: 3,000 lx at the light-receiving face | ||||
| Voltage withstandability | 1,000 V AC for one min. between all supply terminals connected together and enclosure (Note 6) | ||||
| Insulation resistance | 20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure (Note 6) | ||||
| Vibration resistance | 10 to 150 Hz frequency, 0.75 mm 0.030 in amplitude in X, Y and Z directions for two hours each | ||||
| Shock resistance | 98 m/s2 acceleration (10 G approx.) in X, Y and Z directions for five times each | ||||
| Emitting element (modulated) | Red LED | Blue LED | Green LED | Infrared LED | |
| Peak emission wavelength | 650 nm 0.026 mil | 470 nm 0.019 mi | 525 nm 0.021 mil | 940 nm 0.037 mil | |
| Material | Enclosure: Heat-resistant ABS, Case cover: Polycarbonate, MODE key: Acrylic, Jog switch: Heat-resistant ABS (FX-301B/G/H: Acrylic) | ||||
| Connecting method | Connector (Note 7) | ||||
| Cable length | Total length up to 100 m 328.084 ft (50 m 164.042 ft for 5 to 8 units, 20 m 65.617 ft for 9 to 16 units) is possible with 0.3 mm2, or more, cable. | ||||
| Weight | Net weight: 20 g approx., Gross weight: 25 g approx. | ||||
| Accessory | FX-MB1 (amplifier protection seal): 1 set |
- | |||
