Bộ thu thập số liệu ICP DAS I-7017RC

Introduce I-7000 Modules

ICP DAS 7000 series distributed I/O modules offer the most cutting edge data acquisition capabilities for your industrial control needs. The ICP DAS I-7000 distributed I/O modules are available in a bevy of Digital and Analog configurations, which are communicable via RS-485, as well as capable of interfacing with ICP DAS's own proprietary DCON software interface. The I-7000 series are the ultimate selection in Remote I/O Data Acquisition Modules.

With these products, you can use the serial port on your laptop or desktop PC to connect to voltage inputs, thermocouples, strain gauges, rtds or any analog or digital sensors. The I-7000 Modules have low power consumption and require 10 to 30 VDC. They come with free DCON Utility configuration software for setting them up and they also come with Free EZ Data Logger software for PC based data logging. The I-7000 modules are perfect for small or large systems.

Features I-7017RC

I-7017/C/F/FC/R/RC is a cost-effective solution for a wide range of valuable industrial control signals and systems. I-7017C modules are the Current Input version. I-7017F modules are high speed. I-7017R modules have ESD Protection. The DCON utility can help users to configure and test the I-7017 modules. Plenty of library functions and demo programs are provided to let users develop programs easily under Windows, Linux and DOS operating systems. Users may mount the modules on a DIN rail, panel or wall. Modules have a screw-terminal block to connect to the signals. I-7017/C/F/FC/R/RC comes with FREE EZ Data Logger Software.

Specifications

Analog I/O                                                      8

Sampling Rate                                                 10/60 Hz

Voltage & Current Input                                    0 - 20 mA
                                                                    4 - 20 mA
                                                                    ±20 mA ****

Common Voltage                                             200 VDC

Over Voltage Protection                                       –

Resolution                                                     16/12-bit

Analog Input

• Channels: 8 differential or 6 differential and 2 single- ended by jumper select
• Resolution: 16-bit
• Input type: mV, V , mA (requires optional external 125 ohm resistor)
• Input range: ± 150mV, ± 500mV, ± 1V, ± 5V, ± 10V and ± 20mA
• Sample rate: 10 Samples/Second
• Bandwidth: 15.7 Hz
• Accuracy: ± 0.1%
• Zero drift: ± 20uV/°C
• Span drift: ± 25ppm/°C
• CMR @ 50/60 Hz: 86 dB min
• NMR @ 50/60 Hz: 100 dB
• Input Impedance: 20M Ohms
• Over voltage protection: ± 35V
• Isolation: 3000Vdc

Communication Interface

• RS-485

Power Supply

• Input: +10 to +30Vdc
• Consumption :1.3W

Mount

• Din Rail Mount