PLC Cimon CM1-SC01B

Serial Module
- Possible to read and write Data by HMI protocol
- Maximum 32 unit communications available for multi-drop configuration
- Long distance communication via modem connection
- Various communication speeds (300bps~76800bps)
- Various diagnostic functions with Loop-Back feature makes for an easy error check
- RS232C / RS422(RS485) communication port by setting up independent channel or linked channel
- 1:1 / 1:N / N:M communication (RS422 only)
- Full-Duplex (RS422) and Half-Duplex (RS485)
- RS485 Multi-Drop communication is available by using parameters
- Various diagnostic function and loop-back function make easy error check
- DNP 3.0 protocol (CM1-SC01DNP)
- Simultaneously link high-speed communication between CIMON PLCs and up to 32 stations

Interface                                   RS422 / RS485

Comm Mode
HMI Mode                                  CIMON Protocol (1 : n)
Loader Mode                              CICON Communication
MODBUS                                    MODBUS RTU Mode (Master / Slave)
PLC LINK                                   Communication between CIMON PLC's
DNP                                          _
User defined mode                      Protocol Program

Data Type
Data Bit                                    7 or 8 bit
Stop Bit                                    1 or 2 bit
Parity                                       Even / Odd / None

Synchronization                          Asynchronous
Transmission Speed                     300 / 600 / 1200 / 2400 / 4800 / 9600 / 19200 / 38400 / 76800
Modem                                      Long Distance Communication by External Modem