Accessories Meyer Sound MPS 482 HP

FRONT PANEL

LEDs per channel

Two blue LEDs to indicate presence of output voltage Two green LEDs to indicate load current
Two red LEDs to indicate blown or open fuse

Fuse

Use only Meyer Sound PN 420.041 when replacing

REAR PANEL

Audio Input

Two XLR 3-pin female connectors OR one 6-position Phoenix connector (not summing to the XLR inputs)

One Link Switch. Sends signal from channel 1 input to channel 2

Channel Output

Two Phoenix 5-pin male connectors

Output Wiring

Two pins for DC power, three pins for balanced audio

Pin 1: 48 V DC -

Pin 2: 48 V DC +

Pin 3: Chassis/earth through 220 kΩ, 1000 pF, 15 V clamp network to provide virtual ground lift at audio frequencies

Pin 4: Signal - Pin 5: Signal +

Output Voltage1

48 V DC per channel

AC POWER

AC Connector

powerCON 20

Voltage Selection

Automatic

Safety Rated Voltage Range

100–240 V AC; 50–60 Hz; 220 W maximum

CURRENT DRAW

Idle Current

0.139 A (115 V AC, 60 Hz); 0.071 A (230 V AC, 50 Hz); 0.150 A rms (100 V AC, 60 Hz)

PHYSICAL

Dimensions

1RU in height, 1/2 width rack mount
W: 8.5 in (216 mm) x H: 1.85 in (47 mm) x D: 8.62 in (219 mm)

Weight

4.4 lb (2 kg)

Rigging

M6 threads on sides and bottom to support mounting; optional MUB-MPS-482 U bracket for flat surface mounting; optional RMT-MPS-482 Rack Mount Tray for mounting two MPS-482HPs in a standard 19-inch wide, 2 RU rack slot

ENVIRONMENTAL

Operating Temperature

0° C to +45° C

Non-operating Temperature

-40° C to +75° C

Humidity

To 95% at 35° C

Operating Altitude

To 5,000 m (16,404 ft)

Non-operating Altitude

To 6,300 m (25,000 ft)

Shock

30 g 11 msec half-sine on each of 6 sides

Vibration

10–55 Hz (0.010 m peak-to-peak excursion)