Mô tả sản phẩm: Pixord P426 PoE
|
Network Camera Hardware
|
|
| System | • CPU: 32-Bit RISC Processor • ROM: 4MB Flash ROM • RAM 32MB SDRAM • Watchdog: Chip to monitor system voltage tolerance and abnormal program execution |
| Connectors | • One RJ-45 connector for Ethernet (built-in Power-over-Ethernet (PoE) optional) • One mini-DIN for RS-485/RS-232/GPIO/Video out • RS-485: for external Pan/Tilt (PT) device control • RS-232: for console connection • GPIO: for one fully opto-isolated alarm input and one relay output • Video out: for connecting to CCTV monitors, DVR, etc. • One internal microphone • One 12VDC jack • One DC-Iris power connector • Two LEDs to indicate network and power/system status • One 10M IR Illuminator |
| Image Sensor | • 1/3” interlaced color/monochrome Sony CCD (Day/Night) • Horizontal resolution: more than 520 TV lines • 0 Lux (F1.2) (when used with IR Illuminator) • Fixed IR Cut Filter |
|
Video
|
|
| Lens | • Standard package: equipped with Tamron CS mount Focal Length (f) 4mm F1.2~360 DC-Iris lens |
| CCD Adjustment | • Backlight Control (BLC): on/off • Electronic Shutter (ES/AES): on/off • Day/Night (Color/Monochrome): on/off (below 5 Lux = mono, above 8 Lux = color) |
| Image Compression | • MPEG-4 Simple Profile (SP); JPEG; MJPEG |
| Video Adjustment | • Brightness, Contrast, Hue, Saturation, Frame rate, Bit rate (Constant Bit Rate (CBR), Variable Bit Rate (VBR) w/ quality levels), Group of Pictures (GOP) size, Frame Sequence (I-Frame, I-Frame/P-Frame), Interlaced/Progressive Scanning |
| Video Bit Rate | • 16K ~4M bits/sec (CBR/VBR configurable (high quality VBR settings for MJPEG can reach up to 10Mbps) |
| Resolutions | • Full D1 (4SIF): NTSC = 720x480; PAL = 720x576 • SIF: NTSC = 352x240; PAL = 352x288 • QSIF: NTSC = 176x 112; PAL = 176x144 |
|
Network
|
|
| Network Interface | • 10/100 Base-T Ethernet |
| Protocols | • TCP(UDP)/IP, ICMP, HTTP, TFTP, FTP, Telnet, SMTP, DHCP, NTP, DNS, DDNS, RTSP, RTP/TCP(UDP) |
|
Operating Environment
|
|
| Operating Temperature | • 0° ~ 50°C |
| Operating Humidity | • 20% ~ 80% RHG |
| Input Voltage | • DC 12V, 1A |
| Power Supply | Built-in PoE IEEE 802.3af |
| Power Consumption | 8.3 W |
|
Mechanical Design
|
|
| Dimensions | • 135(L) x 85(W) x 40(H) mm |
| Net Weight | • 0.57 kg (excluding power adapter) |
| Approvals | • CE / FCC |
|
Management
|
|
| Installation | • PiXORD IP Installer (Win32 Application) |
| Firmware Upgrade | • Remote upgrade via FTP • PiXORD Firmware Upgrade utility (Win32 Application) (available with future upgrade) • Customized Web UI is upgradeable via FTP and Telnet |
| Client PC Requirements | • Pentium 4 2.0GHz or equivalent • 512MB RAM • Microsoft Windows 98se/Me/2000/XP • Microsoft Internet Explorer 5.x or above • Microsoft DirectX 9.0c • Macromedia Flash 6 • MPEG-4 Software Codec |
| Security | • Multi-tiered access control for configuration |
| Recording | • Directly from Web UI while viewing the live video stream • PiXORDWare Recording Software – free 16-channel surveillance and configuration software |
