Mô tả sản phẩm: Pixord P-400
|
Hardware
|
|
| System | • CPU: 32-Bit RISC Processor • ROM: 4MB Flash ROM • RAM 32MB SDRAM • Watchdog: Chip to monitor system voltage tolerance and abnormal program execution |
| Connectors | • One RJ-45 connector for Ethernet (built-in Power-over-Ethernet (PoE) optional) • One mini-DIN for RS-485/RS-232/GPIO/Video out • RS-485: for external Pan/Tilt (PT) device control • RS-232: for console connection • GPIO: for one fully opto-isolated alarm input and one relay output • Video out: for connecting to CCTV monitors, DVR, etc. • One internal microphone • One 12VDC jack • One DC-Iris power connector • Two LEDs to indicate network and power/system status • Two wireless network antenna connectors (only available on the wireless model) |
| Image Sensor | • 1/3” internal Sony CCD • 0.15 Lux (F1.2) |
|
Video
|
|
| Lens | • Standard package: equipped with CS mount Focal Length (f)6.0mm F1.8 lens • Supports Direct Drive lenses: built-in VR for DC level adjustment • Optional: • Focal Length (f)4.0mm, auto DC iris F1.2~64 lens • Vari-focal lens (f)3.2~10mm, auto dc iris F1.4~360 lens |
| CCD Adjustment | • Backlight Control (BLC): on/off • Electronic Shutter (ES/AES): on/off |
| Image Compression | • MPEG-4 Simple Profile (SP); JPEG; MJPEG |
| Video Adjustment | • Brightness, Contrast, Hue, Saturation, Frame rate, Bit rate (Constant Bit Rate (CBR), Variable Bit Rate (VBR) w/ quality levels), Group of Pictures (GOP) size, Frame Sequence (I-Frame, I-Frame/P-Frame), Interlaced/Progressive Scanning |
| Video Bit Rate | • 16K ~4M bits/sec (CBR/VBR configurable (high quality VBR settings for MJPEG can reach up to 10Mbps) |
| Resolutions | • Full D1 (4SIF): NTSC = 720x480; PAL = 720x576 • SIF: NTSC = 352x240; PAL = 352x288 • QSIF: NTSC = 176x 112; PAL = 176x144 |
|
Network
|
|
| Network Interface | • 10/100 Base-T Ethernet • IEEE 802.11g wireless LAN (optional) |
| Protocols | • TCP(UDP)/IP, ICMP, HTTP, TFTP, FTP, Telnet, SMTP, DHCP, NTP, DNS, DDNS, RTSP, RTP/TCP(UDP) |
|
Operating Environment
|
|
| Operating Temperature | • 0° ~ 50°C |
| Operating Humidity | • 20% ~ 80% RHG |
| Input Voltage | • DC 12V, 1A |
| Power Supply | Built-in PoE IEEE 802.3af |
| Power Consumption | 8.1W |
|
Mechanical Design
|
|
| Dimensions | • 135(L) x 85(W) x 40(H) mm |
| Net Weight | • 0.57 kg (excluding power adapter) |
| Approvals | • CE / FCC |
|
Management
|
|
| Installation | • PiXORD IP Installer (Win32 Application) |
| Firmware Upgrade | • Remote upgrade via FTP • PiXORD Firmware Upgrade utility (Win32 Application) (available with future upgrade) • Customized Web UI is upgradeable via FTP and Telnet |
| Client PC Requirements | • Pentium 4 2.0GHz or equivalent • 512MB RAM • Microsoft Windows 98se/Me/2000/XP • Microsoft Internet Explorer 5.x or above • Microsoft DirectX 9.0c • Macromedia Flash 6 • MPEG-4 Software Codec |
| Security | • Multi-tiered access control for configuration |
| Recording | • Directly from Web UI while viewing the live video stream • PiXORDWare Recording Software – free 16-channel surveillance and configuration software |
