High Accuracy Data Acquisition Systems AOIP DATALOG 140

Description:

The DATALOG series is designed to measure, handle, process, monitor and record analogue and digital signals from all common types of physical sensors. 
The systems can be supplied in various configurations with a choice of input and output boards as well as options such as built-in display and printer. 
Whatever system chosen, and thanks to the measurement metrological quality, the programming power offered by the internal functions, the DATALOG systems are well adapted to numerous applications, such as: 

• Stand-alone data acquisition system without PC.
• Sensor calibration system.
• Testing bench.
• Conditioning chamber and autoclave validation.
• PC input/output interface.
• Acquisition module for programmable controller or standard supervisor.

Specification

• Embedded software
  • The DATALOG series provides the user with a large amount of programming power.
  • This can be used or not depending upon the work to be carried out.
• Channels
  • Each module can address 2 000 channels.
  • These can be real channels (input or output) or virtual channels performing computations.
• Monitoring
  • 4 programmable thresholds per channel.
  • A specific relay output or, if required, a conditional processing may be associated to each threshold.
• Mathematical operations
  • Any mathematical, Boolean and statistical computations may be defined on or between channels. 100 linearization table with 40 couples of counts each may be accessed by the user (measured value associated with computed value), thus allowing corrections of sensors.
  • Conditional processing
  • IF, THEN, DO are accessible and authorise changes to constants, thresholds, tasks, i.e. condition scanning.
• Channel scanning
  • The system is organised by “tasks” (up to 100) which define the inputs/outputs scanning and result output to peripherals.
  • Storage and PCMCIA
  • The DATALOG are equipped (as standard) with 6 storage memories of 8 000 measurements (1 per task over the first six tasks). All the DATALOG with the optional keypad are equipped with a PCMCIA slot authorising loading of various configurations and large capacity storage.
• Configuration and processing
  • All the DATALOG can be configured using PC software which enables the operator to collect the data stored for PC processing (curves, delayed computations, export to spreadsheets).
• Software
  • In addition to the configuration and processing software, a real time supervisory software is available for networking.
  • Various utilities (automatic collecting of data via modem) a DLL library and a LABVIEW driver complete the range.
Calibration Certificates:
Conformity or calibration certificates are also optionally available, but must be requested with the instrument at the time of ordering. Select required option before adding to cart.

QM05 Certificate

• Simply states that the device operates within the tolerances defined in the instrument specification.

QM04 Certificate

• As QM04 Certifiacte, but also lists the primary test instruments used during testing. However, no test data is provided (price available upon request)

QM01 Certificate

• Full COFRAC calibration certificate. COFRAC is the French equivalent of UKAS and DKD.