Lưỡi cắt, đĩa cắt Allied High Tech CBN Bond

CBN Bond blades are composed of an inner metal core and an outer rim. The rim consists of either metal or resin mixed with abrasive, cured under high temperature and pressure to bond the matrix together. Metal bonding offers long life and durability, while resin bonding creates less heat, provides better surface finish and is well suited for cutting hard, delicate or brittle materials.
CBN Metal Bond
Recommended for sectioning ferrous metals including steels, iron, cobalt, nickel and lead based alloys. Most commonly used at lower (<1000 RPM) speeds.
CBN Resin Bond
Recommended for sectioning hard steels above Rc 60. Most commonly used at higher (>1000 RPM) speeds.

​

60-20071	Wafering Blade, CBN Metal Bond, 4″ x .012″ x .5″ (102 x .31 x 12.7 mm)
60-20076	Wafering Blade, CBN Metal Bond, 5″ x .015″ x .5″ (127 x .38 x 12.7 mm)
60-20082	Wafering Blade, CBN Metal Bond, 6″ x .020″ x .5″ (152 x .51 x 12.7 mm)
60-20083	Wafering Blade, CBN Metal Bond, 7″ x .025″ x .5″ (178 x .64 x 12.7 mm)
60-20087	Wafering Blade, CBN Metal Bond, 8″ x .030″ x .5″ (203 x .76 x 12.7 mm)
60-30005	Wafering Blade, CBN Resin Bond, 5″ x .020″ x .5″ (127 x .51 x 12.7 mm)
60-30010	Wafering Blade, CBN Resin Bond, 6″ x .020″ x .5″ (152 x .51 x 12.7 mm)
60-30015	Wafering Blade, CBN Resin Bond, 7″ x .025″ x .5″ (178 x .64 x 12.7 mm)
60-30020	Wafering Blade, CBN Resin Bond, 8″ x .030″ x .5″ (203 x .76 x 12.7 mm)