D-Link DGS-712 10/100/1000Base-T (UTP) SFP (Mini-GBIC) Transceiver 100m

General features:
Standard: IEEE 802.3ab 1000BASE-T Gigabit Ethernet
Transceiver Type: SFP (Small Form Pluggable)
Connector: RJ-45
Auto MDI/MDIX
- Automatic crossover detection enabled
- External crossover cable not required
Data Rate
- 1,000 Mbps (IEEE 802.3 compatible)
- 10/100/1000 BASE-T operation requires the host system to have an  SGMII interface with no clocks. With a SERDES interface,  this transceiver will operate at 1000BASE-T only
Cable Type: Cat. 5 twisted-pair cable
Maximum Cable Distance Coverage: 100 meters
Supply Current
- 350mA (typical)
- 400mA (maximum)
- 1.3W max power over full range of voltage and temperature *
* Caution: power consumption and surge current are higher than the specified values in the SFP MSA
Input Voltage
- 3.1V (minimum)
- 3.3V (typical)
- 3.5V (maximum)
- Referenced to GND
Maximum Voltage: 4V
Surge Current
- 30mA
- Hot plug above steady state current *
* Caution: power consumption and surge current are higher than the specified values in the SFP MSA
Operating Temperature: 0  to 85  C
Storage Temperature: -40  to 85  C