FIBER OPTICAL MODEM Unmanaged Industrial Ethernet Switch

v  FHC rail switch FHC2006M-2SM/2MM provides 2 uplink redundant 100Mbit/s optic ports. The uplink redundant fiber optic interface can be used to build a self-healing fiber optic ring network. When the system fails, the time of redundancy reversal is less than 300ms and the reliability of the system is thus improved. It also provides two power ports 100 Mbit/s to build a self-healing power port. When the system re-configures, the time of redundancy reversal is less than 300ms. Due to its self adaptability, each of the four 10/100Base-T twisted-pair ports can automatically set up to 10BASE-TX state or 100BASE-TX state as well as full or half duplex operation mode. The starting time for this function can be reduced by connecting the equipment through the plug and play mode. 24V power supply redundancy is provided to improve the reliability of the network and the system.

v   FHC2006M-2SM/2MM has a WEB-based on network management system. These functions facilitate the simple and easy establishment and installation of FHC2006M-2SM/2MM.

v  A +24V power supply is used for powering the system and the redundancy mode can also be set up.