Lutron DM-9030

ELECTRICAL SPECIFICATIONS

R ( resistance )

20 M x 0.01 M, 2 M x 0.001 M, 200 K x 0.1 K,

20 K x 0.01 K, 2 K x 0.001 K, 200 x 0.1 ohm .

ACV

600 ACV x 1 ACV, 200 ACV x 0.1 ACV, 20 ACV x 0.01 ACV,

2 ACV x 0.001 ACV, 200 AC mV x 0.1 AC mV.

DCV

600 DCV x 1 DCV, 200 DCV x 0.1 DCV, 20 DCV x 0.01 DCV,

2 DCV x 1 DC mV, 200 DC mV x 0.1 DC mV.

ACA

10 ACA x 0.01 ACA.

DCA

10 DCA x 0.01 DCA.

Hz

Auto range, 1.999 KHz x 1 Hz, 19.99 KHz x 10 Hz, 199.9 KHz x 0.1 KHz,

900 KHz x 1 KHz.

Temperature ( ℃ )

Type K thermocouple,  -200 to 1230 ℃.

Temperature ( ℉ )

Type K thermocouple, -328 to  2246 .

Point

To test the point condition, " Good " or " Failure ".

Dwell

0 - 120 degree ( 3 CYL. ), 0 - 90 degree ( 4 CYL. ), 0 - 72 degree ( 5 CYL. )

0 - 60 degree ( 6 CYL. ), 0 - 45 degree ( 8 CYL. ).                           CYL. : cylinder

Tachometer

Secondary tach. test method, no matter what the cylinder no. is. Measuring range : 100 RPM to 9,999 RPM. Resolution : 1/10/100 RPM.

Continuity beeper

A continuity test beeper is standard, when  checking short or open circuit, it is not necessary to look at the meter. The beeper sounds if continuity is present.

Adapter range and adapter button

Cooperate the optional full line adapters, push the " Adapter button " able to adjust decimal point to get the right display value exactly.

DmRS-232 interface

Isolated ( photo couple ) RS232 serial computer interface , 9600 baud rate.