TFA ATH-1006

• Model ATH-1006: INSTRUCTIONS FOR USE Digital MAX-MIN

Thermometer/Hygrometer Art.No.30.5000/30.5002

With the Hygro-Therm, you have acquired a precision electronic instrument for measuaring the temperature, humidity and the highest and lowest values of both (MAX-MIN function).

Limits        Temperature from -10°C to +60°C (14°F to 140°F)
                 Humidity from 10% to 99% R.H.

Max.error   ±1°C (±1.8°F) within -10°C to +50°C (14°F to 122°F)
                ±5% R.H. within 25% to 75% R.H.and 0°C to 50°C (32°F to 122°F)

Battery      1.5 Volt AAA.

Caution:used batteries are hazardous waste!

USE:

1.      Open the battery compartment by pushing the cover on the back of the instrumen downwards as indicated by the arrow. Remove the battery safety strip and the protection foil on the display.
The instrument is now ready for use.

2.      The temperature unit can be changed from °C to °F by the sliding switch at the back instrument.

3.      The upper display now show the current temperature in °C or °F. The lower display shows the relative humidity in %

4.      Displaying maximum /minimum values.

            a. Pressing the MAX/MIN button, the highest values since the unit was last re-set appear you can now, for example , find out the highest temperature of the day in your office or the highest  humidity in your bathroom. (A degree less heat in the office saves up to 6% in heating costs).

            b. Pressing the same button again gets you the lowest values since the unit wa last re-set.
This is very useful is checking how far the heating system cools of at night  and what  the humidity dropped to. The latter can affect  your health  if too low.

            c. To return to the current values, press the MAX/MIN  button again.

  5.    Resetting the MAX/MIN memory to the present values
         press and hold the RESET button for 3 seconds.

  6.   The unit can be hung the enclosed device or stand on the integrated fold-out foot.

  7.   If the battery is nearly used up, a low battery flag is show at the bottom-left corner of the lower display. Replace the battery, to ensure the unit works normally.

Source of error: Please change the battery before making any complaint