Bộ khuyếch đại EX-1030L

1. Summary

EX1030L Indoor Bi-directional Amplifier are special amplifiers designed for the last”1km” of the bi-directional transmission network. Special CATV RF modules packaged in SOT-115  are used as forward channel; Microwave tube push-pull circuit with low noise are used as backward channel ;It has the characteristics of low power consumption，high reliability and excellent cost performance. And it is suitable for small and medium sized CATV bi-directional transmission network.

 

2. Performance Characteristics

■ 

Microwave tube push-pull circuit with low noise or special CATV RF modules packaged in SOT-115 are used as forward channel whose output level is stable and nonlinear indicators are good; Microwave tube push-pull circuit are used as backward channel whose distortion is low and signal-to-noise ratio is high.

■ 

It is more convenient for debug engineering debug, because of the plug-in diplexer filters with built-in adjustable equalizers, adjustable attenuators, plug-in output splitters and scientific and reasonable ports for online test.

■ 

These equipments will work in the field rugged environment for a long time continuously, because of the aluminium alloy casing, good heat dispersing performances, beautiful looks, dependable linear power supply and lightning protection systems.

 

3. Technical Parameters

Item	Unit	Technical Parameter
		EX1030L-00	EX1030L-15
Downlink Transmission Path
FrequencyRange	MHz	47/87～862
Nominal Gain	dB	32
Minimum Full Gain	dB	≥32
Nominal Input Level	dBμV	70
Nominal Output Level	dBμV	102
Flatness in Band	dB	±0.75
Noise Figure	dB	≤10
Return Loss	dB	≥16
C/CTB	dB	≥ 57
C/CSO	dB	≥ 56
Group Delay	ns	≤ 10  (112.25 MHz/116.68 MHz)
Signal to Hum Noise Ratio	%	< 2
Gain Stability	dB	-1.0 ~ +1.0
Uplink Transmission Path
FrequencyRange	MHz	5 ~ 30/65	5 ~ 30/65
Nominal Gain	dB	-3	15
Minimum Full Gain	dB	-	≥15
Maximum Output Level	dBμV	-	≥110
Flatness in Band	dB	±0.75	±0.75
Noise Figure	dB	-	≤12
Return Loss	dB	≥16	≥16
Carrier to Double Inter-modulation Ratio	dB	-	≥ 52
Group Delay	ns	≤ 20  (57MHz/59MHz)	≤ 20  (57MHz/59MHz)
Signal to Hum Noise Ratio	%	＜2	＜2
General Characteristic
Characteristic Impedance	Ω	75
Supply Voltage	V	A：AC（165 ～250）V
Impulse Withstand Voltage（10/700μs）	kV	> 5
Power Consumption	W	8
Outside Dimension	mm	150（L）x 108（W）x 54（H）