Supermicro X9DRG-HTF+II

Mô tả sản phẩm: Supermicro X9DRG-HTF+II

Product SKUs MBD-X9DRG-HTF+II -P X9DRG-HTF+II (Bulk Pack)   Physical Stats Form Factor Proprietary Dimensions 19.8" x 9.2" (50.3cm x 23.4cm)   Processor/Cache CPU Intel® Xeon® processor E5-2600     and E5-2600 v2 family†     (up to 130W TDP **) Dual Socket R (LGA 2011) Cache Up to 30MB System Bus QPI up to 8 GT/s Note † BIOS version 3.0 or above is required Note ** Motherboard supports this maximum TDP. Please verify your system can thermally support   System Memory Memory Capacity 16x 240-pin DDR3 DIMM sockets Up to 1TB DDR3 ECC LRDIMM Up to 512GB DDR3 ECC RDIMM Up to 128GB DDR3 ECC/non-ECC UDIMM Memory Type 1866/1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs Support ECC and non-ECC UDIMMs DIMM Sizes 32GB, 16GB, 8GB, 4GB, 2GB, 1GB,  64GB LRDIMM Memory Voltage 1.5 V, 1.35 V Error Detection Corrects single-bit errors Detects double-bit errors (using ECC memory)   On-Board Devices Chipset Intel® C602 chipset AHCI SATA SATA 2.0 3Gbps with RAID 0, 1, 5, 10 SATA 3.0 6Gbps with RAID 0, 1, 5, 10 SCU SATA SATA 2.0 3Gbps with RAID 0, 1, 5, 10 IPMI Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support Nuvoton WPCM450 BMC Network Controllers Intel® X540 Dual Port 10GBase-T Virtual Machine Device Queues reduce I/O overhead Supports 10GBase-T, 100BASE-TX, and 1000BASE-T, RJ45 output 1x Realtek RTL8201N PHY (dedicated IPMI) (Both CPUs need to be installed for LAN ports 1 and 2 to be enabled) Video Nuvoton WPCM450 BMC   Input / Output AHCI SATA 2x SATA 3.0 ports (6Gbps) 4x SATA 2.0 ports (3Gbps) SCU SATA 4x SATA 2.0 ports (3Gbps) LAN 2x RJ45 10GbE LAN ports 1x RJ45 Dedicated IPMI LAN port USB 4x USB 2.0 ports total  (2 rear + 2 via header) Video 1x VGA port Serial Port / Header 1x fast UART 16550 serial COM port header DOM 1x DOM (Disk on Module) power connector TPM 1x TPM 1.2 20-pin Header

Chassis (Optimized for X9DRG-HTF+II ) 1U Chassis CSE-118GH-R1K66B Important Chassis Notes To support the new generation Intel® Xeon® processor-based motherboards, Revision M chassis is recommended. Please talk to your sales representative for details.   SuperServer(s) with X9DRG-HTF+II Model(s) SYS-1027GR-72RT2 SYS-2027GR-TRT2 SYS-1027GR-TRT2 SYS-1028GR-TRT SYS-2028GR-TRT   Expansion Slots PCI-Express 4x PCI-E 3.0 x16 1x PCI-E 3.0 x8 (in x16) 1x PCI-E 2.0 x4 (in x8) Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram for details.   System BIOS BIOS Type 128Mb SPI Flash EEPROM with AMI BIOS BIOS Features Plug and Play (PnP) APM 1.2 DMI 2.3 PCI 2.3 ACPI 1.0 / 2.0 / 3.0 USB Keyboard support SMBIOS 2.7.1 UEFI 2.3.1   Management Software SuperDoctor® III Watch Dog NMI IPMI 1.5 / 2.0 Intel® Node Manager Power Configurations ACPI / APM Power Management Keyboard Wakeup from Soft-Off CPU Fan auto-off in sleep mode Power-on mode for AC power recovery   PC Health Monitoring Voltage Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages. 5+1 Phase-switching voltage regulator FAN 12x 4-pin fan headers 12x fans with tachometer monitoring Status monitor for speed control Status monitor for on/off control Low noise fan speed control Pulse Width Modulated (PWM) fan connectors Overheat backup fan connector Temperature Monitoring for CPU and chassis environment CPU thermal trip support Thermal Control for 12x Fan Connectors Thermal Monitor 2 (TM2) support PECI LED CPU / System Overheat LED Other Features Chassis intrusion detection Chassis intrusion header SDDC Support RoHS   Operating Environment Operating Temperature Range 10°C - 35°C (50°F - 95°F) Non-Operating Temperature Range -40°C - 70°C (-40°F - 158°F) Operating Relative Humidity Range 8% - 90% (non-condensing) Non-Operating Relative Humidity Range 5% - 95% (non-condensing)