Mô tả sản phẩm: Thiết bị đo lực căng dây đai Checkline BTM-400 Plus
Mô tả:
Belt Tension Meter Checkline
THIẾT BỊ ĐO LỰC CĂNG DÂY ĐAI
Model: BTM - 400Plus
Hãng sản xuất: Checkline - Mỹ
Thông số kỹ thuật
Dải đo: 3– 800 Hz
Tỷ trọng đai lớn nhất: 10 kg/m
Sai số mẫu của thiết bị: < 1%
Sai số tính toán: ± 1 Hz
Sai số tổng: < 5%
Nhiệt độ hoạt động: 50 to 122 °F (10 to 50 °C)
Nhiệt độ bảo quản: 23 to 158 °F (–5 to 70 °C)
Máy chính được làm bằng Plastic (ABS)
Kích thước máy chính: 3.15 inch x 4.96 inch x 1.47 inch
(80 x 126 x 37mm)
Kích thước hộp đựng: 8.9 inch x 7.0 inch x 2.0 inch
(226 x 178 x 50mm)
Hiển thị: 2-line LCD, 16 char./line
Ngôn ngữ: English, German, French, Italian
Nguồn cấp: 9-volt alkaline battery
BTM-400PLUS Belt Tension Meter |
Supplied with both plug-in and cable-connected sensors The new CHECK-LINE® BTM-400PLUS accurately measures the static tension of flat, V and ribbed belts of rubber, leather, fabric and composite materials by measuring the natural frequency (Hz) of a segment of the belt that has been tapped and then converting it into tension units of newtons (N) or pounds force (lbf). The instrument uses a pulsed ruby red light source to measure the natural frequency of the vibrating belt. Unlike competitive models, the BTM-400PLUS is NOT affected by ambient noise, providing quick reliable results in all production and field applications. |
Features
|
|
Photo Gallery - click any photo to enlarge
BTM-400PLUS with Wand Sensor |
Typical Applications
External Probe Dimensions
Complete Kit
The BTM-400PLUS is supplied as a complete kit, including: the gauge, plug-in and cable connected sensors, 9-volt battery, Instruction Manual – all in a foam-fitted, hard plastic carrying case. |
Specifications
Measuring Range* | 3 - 800 Hz |
Accuracy** | ± 5% or better |
Sensing Distance*** | 0.200" - 1.6" (5 - 40 mm), typically (2.5"/60 mm max, depending upon ambient light & surface of belt to be measured) |
Casing | ABS Plastic |
Display | 2 line LCD, 16 character per line |
Input Range | free span length: up to 9.990 m belt mass: up to 9.999 kg/m |
Power Supply | 9V battery |
Belt Desnity | Belt Density (d = kg/m or lb/ft) |
Warranty | 1 Year |
Light Source | Red LED |
Light Size | at 50mm - 6mm Square at 150mm - 15mm Square |
*BTM-400PLUS can measure up to 800 Hz, however most belts will break near 400Hz
**Static tension (T) accuracy depends on the precision of entered values forfree belt span (L), density (d) and natural frequency (f) of the vibrating free belt span, that has been plucked or struck, as noted in the relationship: T = 4dL2f2. Note that highest accuracy is achieved in the frequency mode where readings are accurate to <1%, ± 1 Hz.
***Sensing distance can be extended when ambient light level is low also by adding a piece of reflective tape in the "target area" of the belt.