Máy đo độ dầy lớp phủ từ tính và không từ tính SANKO SW-7100II

Measuring range  :  Depending on optional probes
Display method  :  Graphic LCD
Calibrations  :  2 points calibration type
Calibration memory  :  One each for ferrous and nonferrous
Data transfer  :  USB (7100Ⅱ)
Power  :  Dry battery (R6P 1.5V)×2, Exclusive AC adaptor (7100Ⅱ), Auto-power off
Temperature  :  0～40℃(non-condensing)
Weight and dimensions  :  72(W)×30(H)×156(D)mm, 200g
Accessories  :  Carrying case, (7100Ⅱ) Exclusive AC adaptor, USB cable, USB driver
Option  :  For ferrous substrate probe (Fe) For nonferrous substrate probe (NFe)

Models	Fe-2.5	NFe-0.6	NFe-2.0
Methods	Magnetic induction type	Eddy current type
Ranges	0～2.50mm	0～600μm	0～2.00mm
Display resolutions	1μm：0～999μm switching to 0.1μm：0～400μm 0.5μm：400～500μm 0.01mm：1.00～2.50mm	1μm：0～600μm switching to 0.1μm：0～400μm 0.5μm：400～500μm	1μm：0～999μm switching to 0.1μm：0～400μm 0.5μm：400～500μm 0.01mm：1.00～2.00mm
Accuracies (on flat face)	0～100μm：±1μm Or ±2% the designated value 101μm～2.50mm：±2%	0～100μm：±1μm Or ±2% the designated value 101μm～600μm：±2%	0～100μm：±1μm Or ±2% the designated value 101μm～2.00mm：±2%
Probes	One point contact constant pressure type, V cut φ13×48mm	One point contact constant pressure type, V cut φ11×48mm	One point contact constant pressure type, V cut φ13×47mm
	Option：V type probe adaptor (3kinds: for φ5 less, φ5～10, φ10～20)
Accessories	Standard thickness, Zero plate for testing (Fe)	Standard thickness, Zero plate for testing (NFe)
Measuring objects	Coating, lining, thermal spray film, plating (except electrolyte nickel plating), etc. on magnetic metal substrates like ferrous, steel, etc.	Insulated films, etc. on non-magnetic substrates like aluminum, copper, etc
		For high stability with thin bars, tubes, minute pieces etc.	For relatively general measuring objects.