Hexin ETU7088 PoE Dual RS485 to Ethernet

Model: ETU7088

Name: PoE Dual RS485 to Ethernet Device Server 

Description

Road Number(HEXIN) ETU7088 Dual RS485 Serial to Ethernet Device Server allows you to install your RS232 serial devices anywhere on your TCP/IP Ethernet WAN/LAN. this Ethernet/serial device server supports PoE (Power over Ethernet) when connected to a PoE switch, hub, or other device - eliminating the need to use an external power supply and in turn making it easier to situate the device server as needed.

Feature

• Supports TCP / IP protocols : TCP, UDP, ICMP, IPv4ARP, IGMP, PPPoE
• Working protocol mode : UDP, TCP Server, TCP Client, Virtual COM
• Network Interface : 100M/10Mbps, automatic matching , 1.5kV isolation protection
• Comply with IEEE802.3 10BASE-T and 802.3u 100BASE-TX standards
• Support serial number: ( dual serial type ): Supports 2 ports rs485 bus
• Baud rate: 300bps ~ 1.8432Mbps
• Parity: None , Odd , even parity
• Data bits : 7,8 bit
• Stop bit : 1,2 bit
• Flow Control: no flow control , RTS / CTS
• Working environment : -45 ~ 85 ℃, 5 ~ 95% humidity
• Storage environment : -55 ~ 125 ℃,, 5 ~ 95% humidity
• Interface: RJ45 socket , 2 ports rs485
• Transmission medium : UTP shielded twisted pair cable supports parallel lines and cross lines. Work in TCP Server mode , TCP Client mode , UDP mode , virtual serial mode Isolation:
• Transmission distance: RS485/422 interfaces 1200m; RS232 interfaces 15m
• Power Supply : DC5-12V. also support POE powered PD standard equipment, support IEEEE802.af
• Long 6.2CM, high 8.0CM, 2.5CM thick 1CM plus hanging on each side of the bottom hole