Hexin ETU7022 PoE Dual RS232 to Ethernet

Model: ETU7022

Name: PoE Dual RS232 to Ethernet Device Server

Description

Road Number(HEXIN) ETU7022 RS232 Serial to Ethernet Device Server allows you to install your RS232 serial devices anywhere on your TCP/IP Ethernet WAN/LAN. this Ethernet/serial device server supports PoE (Power over Ethernet) when connected to a PoE switch, hub, or other device - eliminating the need to use an external power supply and in turn making it easier to situate the device server as needed.

Feature

• Supports TCP / IP protocols : TCP, UDP, ICMP, IPv4ARP, IGMP
• Working protocol mode : UDP, TCP Server, TCP Client, Virtual COM
• Network Interface : 100M/10Mbps, automatic matching , 1.5kV isolation protection
• Comply with IEEE802.3 10BASE-T and 802.3u 100BASE-TX standards
• Support serial number : ( dual serial type ) : Supports two serial ports 232 ( standard 9 -pin serial port, COM port interface device mimics the computer )
• Baud rate: 300bps ~ 1.8432Mbps
• Parity: None , Odd , even parity
• Data bits : 7,8 bit
• Stop bit : 1,2 bit
• Flow Control: no flow control , RTS / CTS
• Working environment : -45 ~ 85 ℃, 5 ~ 95% humidity
• Storage environment : -55 ~ 125 ℃,, 5 ~ 95% humidity
• Interface: RJ45 socket , 2 ports RS232 DB9-PIN
• Transmission medium : UTP shielded twisted pair cable supports parallel lines and cross lines. Work in TCP Server mode , TCP Client mode , UDP mode , virtual serial mode Isolation:
• Transmission distance: RS485/422 interfaces 1200m; RS232 interfaces 15m
• Power Supply : DC5-12V. also support POE powered PD standard equipment, support IEEEE802.af
• Long 6.2CM, high 8.0CM, 2.5CM thick 1CM plus hanging on each side of the bottom hole