CAN to Ethernet Modubs TCP Modbus RTU Converter, ICP DAS I-7540D-MTCP

Features:

• 80186-80 Embedded CPU, or compatible
• Ethernet Protocols, TCP,UDP,IP,ICMP,ARP
• COM driver support interrupt & 1K QUEUE Input & Output buffer
• Provide 200 CAN frames buffer in CAN to Modbus Mode
• NXP 82C 250 CAN Transceiver
• Support both CAN specification 2.0A and 2.0B
• Max transmission speed up to 1M bps for CAN and 115.2kbps for RS-232 & RS-485
• Max transmission distance of CAN over 1000m (follow CAN specification)
• 7-segment LED display to Module IP, RS-232 baud rate, CAN configuration…
• CAN Error/Tx/Rx LED indicator
• Software configurable CAN and RS-232 communication parameters
• Firmware updated from COM1 or Ethernet port
• Support Web Configuration
• Support maximum 24 Ethernet clients connection
• Support function code 0x03/0x04/0x10 of Modbus TCP/RTU command for reading and writing CAN message
• Provide the transparent communication between the CAN devices via Ethernet
• Support 30 specific CAN IDs in the Modbus TCP/RTU mode

CAN bus Power Meter Solution

• The PM-213x-CAN series power meter provides the CAN bus interface for users to easily gather the real-time power consumption information in their CAN applications. The PM-213x-CAN provides the Auto-Response mode which responses messages at regular intervals automatically. It makes the communication more efficient when collecting a lot of remote power information. The polling mode offers the precise information of every step required by the monitors. In addition, the PM-213x-CAN also owns the arbitration mechanism which can avoid data collision and error detection.

Utility:

• Operation mode configuration
• IP 、 Gateway 、 Mask configuration
• CAN bus Baud rate configuration
• CAN BTR0 and BTR1 configuration
• CAN acceptance filter configuration
• CAN 2.0A or 2.0B specific selection
• Error code Responded selection
• Easy test to transmit/receive CAN messages
• Easy test to Modbus TCP/Modbus RTU command