Mô tả sản phẩm: Media Converter Gigabit, SM/MM, upto 120km - Perle Canada
| Power | |
|---|---|
| Input Supply Voltage | 6 - 30 vDC, unregulated ( 12 vDC Nominal ) |
| Current | 250 mA |
| Power Consumption | 3.0 watts |
| Power Connector | 5.5mm x 9.5mm x 2.1mm barrel socket |
| Power Adapter | |
| Universal AC/DC Adapter | 100-240v AC, regulated DC adapter included |
| Indicators | |
| Power / TST | This green LED is turned on when power is applied to the media converter. Otherwise it is off. The LED will blink when in Loopback test mode. |
| Fiber link on / Receive activity (LKF) | This green LED is operational only when power is applied. The LED is on when the 1000Base-X link is on and flashes with a 50% duty cycle when data is received. The LED will slow blink when the 1000Base-X interface has been taken down as a result of a fault on the 1000Base-T interface. |
| Copper link on / Receive activity (LKC) | This green LED is operational only when power is applied. The LED is on when the 1000Base-T link is on and flashes with a 50% duty cycle when data is received. The LED will slow blink when the 1000Base-T interface has been taken down as a result of a fault on the 1000Base-T interface. |
| Switches - accessible through a side opening in the chassis | |
| Auto-Negotiation | Enabled (Default - Up) In this mode the 1000Base-X and the 1000Base-T will negotiate to the HCD of the two link partners. The 1000Base-X will link up after the negotiation is completed and the 1000Base-T has linked up. Disabled - The 1000Base-X will not use auto negotiation. The 1000Base-T will negotiate to the HCD of the Switch settings and the link partner. |
| Link Mode | Link Mode provides a transparency to the state of the copper link allowing for simplified trouble shooting from the devices connected to the media converter. Normal (Default – Up) With Fiber Auto Negotiation enabled when the 1000Base-T link goes down the 1000Base-X link is brought down. The 1000Base-X link will advertise Remote Fault (Link Fault). With Fiber Auto Negotiation disabled the state of the 1000Base-T link has no effect on the 1000Base-X link. Smart Link Pass Through (Down) With Fiber Auto Negotiation enabled the behavior is as follows. When the 1000Base-T link goes down the 1000Base-X link is brought down. The 1000Base-X link will advertise Remote Fault (Link Fault). When Remote Fault (Link Fault) is received on the 1000Base-X interface the 1000Base-T transmitter will be turned off. When the 1000Base-T receiver is off the 1000Base-X transmitter will be turned off. When the 1000Base-X receiver goes off the 1000Base-T transmitter will be turned off. With Fiber Auto-Negotiation disabled the behavior is as follows. When the 1000Base-T receiver is off the 1000Base-X transmitter will be turned off. When the 1000Base-X receiver goes off the 1000Base-T transmitter will be turned off. |
| Pause | When Fiber Auto Negotiation is disabled Pause should only be enabled when all devices connected to the media converter support pause. Enabled(Default) - The Media converter will advertise Pause capable, Asymmetric pause not needed during Auto-Negotiation.. Disabled - The Media converter will advertise that it does not have Pause capability during Auto-Negotiation. |
| Fiber Fault Alert | The Fiber Fault Alert switch has meaning when Auto-Negotiation is disabled Enabled (Default - Up) When the 1000Base-X receiver is off the 1000Base-X transmitter is turned off. Periodically the 1000Base-X receiver will be turned on for a short period to allow the condition to clear if the 1000Base-X link partner is using a similar feature. Disabled (Down) |
| Duplex | Full (Default-Up) - The media converter will advertise Full Duplex Capable, Half Duplex Capable. AUTO (Down) -The Media converter will advertise Full Duplex Not Capable, Half Duplex Capable. |
| Remote Loopback | The media converter can perform a loopback on the 1000Base-X fiber interface. Disabled (Default - Up) Enabled - The 1000Base-X receiver is looped to the 1000Base-X transmitter. The 1000Base-T transmitter is taken off the interface. |
| Connectors | |
| 1000Base-T | RJ45 connector, 4 pair CAT 5 UTP cable or cable |
| Magnetic Isolation | 1.5kv |
| Packet Transmission Characteristics | |
| Bit Error Rate (BER) | <10 -12 |
| Environmental Specifications | |
| Operating Temperature | 0° C to 50° C (32° F to 122° F) |
| Storage Temperature | minimum range of -25° C to 70° C (-13° F to 158° F) |
| Operating Humidity | 5% to 90% non-condensing |
| Storage Humidity | 5% to 95% non-condensing |
| Operating Altitude | Up to 3,048 meters (10,000 feet) |
| Heat Output ( BTU/HR ) | 10.2 |
| MTBF (Hours) | Without power adaptor: 609,000 With power adaptor: 337,000 |
| Mounting | |
| Din Rail Kit | Optional |
| Wall / Rack Mount Kit | Optional |
| Product Weight and Dimensions | |
| Weight | 0.3 kg, 0.66 lbs |
| Dimentions | 120 x 80 x 26 mm, 4.7 x 3.1 x 1.0 inches |
| Packaging | |
| Shipping Weight | 0.55 kg, 1.2 lbs |
| Shipping Dimentions | 170 x 280 x 70 mm, 6.7 x 10.2 x 2.8 inches |
| Regulatory Approvals | |
| Emissions | FCC Part 15 Class A, EN55022 Class A |
| CISPR 22 Class A | |
| EN61000-3-2 | |
| Immunity | EN55024 |
| Electrical Safety | UL 60950-1 |
| EN60950 | |
| CE | |
| Laser Safety | EN 60825-1:2007 |
| Fiber optic transmitters on this device meet Class 1 Laser safety requirements per IEC-60825 FDA/CDRH standards and comply with 21CFR1040.10 and 21CFR1040.11. | |
| Environmental | Reach, RoHS and WEEE Compliant |
