Mô tả sản phẩm: Bộ chuyển đổi DYS 1-CH Video + 1 Duplex Data + 1 Ethernet/IP over Fiber
System Design
VDO-10101FDET/R provides for the digital transmission of 1 Channel Composite Video, 1 Duplex data and 10/100M Ethernet, and the data support RS485,RS232,RS422, no audio.
Stand-alone or rack-mount. All units of VDO-10101FDET/R come in an insert card version.The cards can be inserted into our 14-slot, 19inch 4U rack-mountable card cage (VDO-CH04).
Single-Mode or Multi-Mode, VDO-10101FDET/R can support FC/PC or ST/PC connector, can be used in Daisy-Chain system (Need to customize) The Transmission distance range according to the Optical Budget. Manufacturer's standard is: Single-mode 20km.
Features
• Support Point-to-Point or Daisy-Chain connection
• Uncompressed Digital Composite Video over one fiber
• Compatible with all PAL, NTSC,SECAM Video Systems
• Data support RS485(2-wire or 4-wire),RS232,RS422, Contact Closure
• Multimode Fiber Support for Distances up to 2 km
• Single-Mode Fiber Support for Distances up to 100 km
• LED Status Provide Rapid Indication of Operating Parameters
• No EMI or RFI and no ground loops
• Support Coarse Wavelength Division Multiplexing (CWDM)
• Stand alone or rack-mount
• Produce according to customer's specifications,providing OEM
Specifications
| • Video | |
| Number of Channels: | 1 Channel Video |
| Video input/output impedance: | BNC 75 Ω |
| Video input/output Compatibility: | PAL, NTSC,SECAM |
| Video input/output voltage: | 1.0 Volt p-p |
| Bandwidth: | 6.5MHZ |
| Bit Resolution: | 8-Bit Digital Transmission |
| Differential Gain: | < 1.5% |
| Differential Phase: | < 1.5 ° |
| Tilt: | < 5% |
| Signal-to-Noise Ratio(SNR): | > 67 dB |
| • Data | |
| Data Formats: | RS485(2-wire or 4-wire),RS232,RS422,Contact Closure |
| Data Rate: | DC to 115.2Kbps |
| Bit Error Rate: | 10E-9 |
| • Ethernet/IP | |
| Standard: | Ethernet IEEE 802.3 (Auto-Negotiation) |
| Data Rate: | 10/100 Mbps |
| Connector: | RJ-45 |
| • Connectors | |
| Video: | 75 Ohm BNC (Gold Center Pin) |
| Data: | Terminal Block |
| Optical: | FC (standard), ST Optional |
| Stand-Alone Power: | Screw terminal block |
| Rack Power: | AC line cord |
| • Electrical & Mechanical | |
| Input Power Requirements: | DC 5V@2A |
| Power Adapter: | AC 100V~240V |
| Power Consumption: | < 3W |
| Stand-Alone Dimensions: | 142mm × 107mm × 25mm |
| Card for 4U Rack Dimensions: | 145mm × 170mm × 20mm |
| Shipping Weight: | 1.8kg (include Transmitter & Receiver) |
| • Environmental | |
| Operating Temperature: | -40°C ~ +75°C |
| Storage Temperature: | -40°C ~ +85°C |
| Relative Humidity: | 0% ~ 95% (non-condensing) |
| MTBF: | >100,000 hours |
Ordering Information & Optical Specifications
| Model Number | Fiber Mode | Wavelengths | Optical Power Budget | Maximum Transmission Distance | |
| Transmitter | Receiver | ||||
| VDO-10101FDEMT | VDO-10101FDEMR | Multi-Mode | 1310/1550nm | 16dB | 2km |
| VDO-10101FDEST | VDO-10101FDESR | Single-Mode | 1310/1550nm | 12dB | 20km |
| VDO-10101FDEST-4 | VDO-10101FDESR-4 | Single-Mode | 1310/1550nm | 18dB | 40km |
| VDO-10101FDEST-6 | VDO-10101FDESR-6 | Single-Mode | 1310/1550nm | 25dB | 60km |
| VDO-10101FDEST-8 | VDO-10101FDESR-8 | Single-Mode | 1490/1550nm | 28dB | 80km |
Note:
• The Optical Power Budget data fit Multi-mode(62.5/125 μm),Single-Mode(9/125 μm).
• When using 50/125 μm multimode fiber, subtract 3 dB from the optical power budget.
• Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels.
• Maximum transmission distance is also limited by fiber bandwidth
• Power adapter is manufactured by third party and is supplied with fitted screw-terminal output cables. power adapter included (for standalone) US, European, UK or Australian power plug.• Please feel free to consult factory for any special requirement and customization.
