Mô tả sản phẩm: 1 Channel Digital Video Optical Transmitter & Receiver
Typical Application- Fibridge recommends that this product be used with Single Mode Fibre.
Overview
The Product provides customer with the most cost-effective solution for transmission of 1 channel uncompressed digital video, 1 reversed stereo audio and 1 reversed RS232/RS422/RS485 data over one single Fibre cable. It is an easy installation and adjustment free device while providing high quality, real-time video. The product may also be maintained by our future product, FB-V1000NMS, a Network Management System.
Applications for this product include CCTV, video surveillance, homeland security, ITS and etc.
Features
* Transports 1 channel digitized, high quality, uncompressed video
* 8MHz video bandwidth, Compatible with NTSC, PAL and SECAM
* Provides 1 reversed stereo audio and 1 reversed data transmission over same optical Fibre
* Easy installation and adjustment free
* Transmission range up to 120KM depending on model
* RS232, RS422/RS485 compatible data interfaces
* Stand alone operation or mount in chassis
Specifications
* Power:
220VAC/50Hz, standalone device
0.2A@12VDC for rack card
* Indicators:
Power, Link Status, Video Signal
Audio status, Data traffic
* Video:
Format: PAL/NTSC/SECAM
Video Signal: 1Vp-p, 75ohm
Digitization: 8bits/10bits
Bandwidth: 8MHz
DG <1%
DP <1 degree
SNR >60dB(weighted)
Connectors: 1 BNC's
* Physical Dimensions:
176X220X25.4(mm) Card
130 x 122 x 36(mm) Standalone
* Audio
Channel: 1 stereo audio
Audio Input: unbalanced, 600Ohms
Digitization: 16bit@48k
Frequency: 10Hz to 20KHz
SNR: >70dB
Connector: RJ45 or RCA
* Data:
Channel: 1, Reversed
Data Rate: 0~~23.04Kbps/channel
Selectable RS-232/RS-422/RS-485
Connector: RJ45 or Terminal Block with Screw Clamps
* Environment:
Operating: -40oC~+70 oC
Storage: -40oC~+85 oC
Humidity: 0-95% Non-Condensing
Order Information
Fibre Type Video Transmitter Video Receiver Range Comment
Multimode
(62.5/125um) F7-1VT -M2S F7-1VR-M2S < 2Km video only
F7-1VT-1AR-1DR-M3S F7-1VR-1AT-1DT- M3S
< 2Km
Single Mode
(09/125um) F7-1VT -S122S F7-1VR-S122S 120Km video only
F7-1VT-1AR-1DR-S042S F7-1VR-1AT-1DT-S042S 40Km
F7-1VT-1AR-1DR-S082S F7-1VR-1AT-1DT-S082S 80Km
CWDM F7-1VT-WSllllrrS1 F7-1VR-WSllllrrS rrmKm video only
F7-1VT-1AR-1DR-WSllllrrS F7-1VR-1AT-1DT-WllllrrS rrKm
Note:
* Replace llll with CWDM wavelength, replace rr with requested distance
* SC connectors standard, consult factory for other connectors.
* Add -M at the end of model number for rack card product
Overview
The Product provides customer with the most cost-effective solution for transmission of 1 channel uncompressed digital video, 1 reversed stereo audio and 1 reversed RS232/RS422/RS485 data over one single Fibre cable. It is an easy installation and adjustment free device while providing high quality, real-time video. The product may also be maintained by our future product, FB-V1000NMS, a Network Management System.
Applications for this product include CCTV, video surveillance, homeland security, ITS and etc.
Features
* Transports 1 channel digitized, high quality, uncompressed video
* 8MHz video bandwidth, Compatible with NTSC, PAL and SECAM
* Provides 1 reversed stereo audio and 1 reversed data transmission over same optical Fibre
* Easy installation and adjustment free
* Transmission range up to 120KM depending on model
* RS232, RS422/RS485 compatible data interfaces
* Stand alone operation or mount in chassis
Specifications
* Power:
220VAC/50Hz, standalone device
0.2A@12VDC for rack card
* Indicators:
Power, Link Status, Video Signal
Audio status, Data traffic
* Video:
Format: PAL/NTSC/SECAM
Video Signal: 1Vp-p, 75ohm
Digitization: 8bits/10bits
Bandwidth: 8MHz
DG <1%
DP <1 degree
SNR >60dB(weighted)
Connectors: 1 BNC's
* Physical Dimensions:
176X220X25.4(mm) Card
130 x 122 x 36(mm) Standalone
* Audio
Channel: 1 stereo audio
Audio Input: unbalanced, 600Ohms
Digitization: 16bit@48k
Frequency: 10Hz to 20KHz
SNR: >70dB
Connector: RJ45 or RCA
* Data:
Channel: 1, Reversed
Data Rate: 0~~23.04Kbps/channel
Selectable RS-232/RS-422/RS-485
Connector: RJ45 or Terminal Block with Screw Clamps
* Environment:
Operating: -40oC~+70 oC
Storage: -40oC~+85 oC
Humidity: 0-95% Non-Condensing
Order Information
Fibre Type Video Transmitter Video Receiver Range Comment
Multimode
(62.5/125um) F7-1VT -M2S F7-1VR-M2S < 2Km video only
F7-1VT-1AR-1DR-M3S F7-1VR-1AT-1DT- M3S
< 2Km
Single Mode
(09/125um) F7-1VT -S122S F7-1VR-S122S 120Km video only
F7-1VT-1AR-1DR-S042S F7-1VR-1AT-1DT-S042S 40Km
F7-1VT-1AR-1DR-S082S F7-1VR-1AT-1DT-S082S 80Km
CWDM F7-1VT-WSllllrrS1 F7-1VR-WSllllrrS rrmKm video only
F7-1VT-1AR-1DR-WSllllrrS F7-1VR-1AT-1DT-WllllrrS rrKm
Note:
* Replace llll with CWDM wavelength, replace rr with requested distance
* SC connectors standard, consult factory for other connectors.
* Add -M at the end of model number for rack card product
