DYSFO DYS1400

Main features

10/100Base-TX to 100Base-FX Media Converter

5 ports 10/100M Ethernet switch with built in transceivers and memory;

Build in SRAM for frame buffer;

Build in storage of 1K MAC address;

Compliance with IEEE802.3, 802.3u, 802.3x standard;

Compliance CSMA/CD Protocol;

Converter twisted-pair cable to 100Base-Fx fiber;

Support 10/100Mbps auto-negotiation for RJ45 ports;

Support auto MDI/MDI-X function for RJ45 ports;;

Passed maximum frame size 1536 bytes;

Broadcast storm protection;

Fiber Port SC/PC (single/multi-mode ),the transmission distance can up to 120Km.

RJ45 Port: 100m for 100Base-Tx UTP Cat.5 cable.

Inside power: AC 220/110V

Power Consume: < 5W.

LED Description

Power: When the power is on and valid ,the LED will solid ON

100M: When the RJ45 port is working at 10M speed ,the LED lamp is off; when 100M speed , it will

solid ON

Link/Act: When Fiber or UTP link is valid ,the LEDs will solid on;When data is exchanging ,the LEDs

will blink;

FX: When the fiber signals is detected the LED will ON .

Technical Specifications

Standard Protocol: IEEE802.3 10 Base-T standard

IEEE 802.3u 100Base-TX/FX standard

2.Connector:Four RJ-45 connector,one SC/ST fiber connector .

Operation mode: full duplex mode or half duplex mode

Power supply parameter: outside: 5V DC 3A

built-in: 110-265V AC 48V DC 12V DC

Environmental temperature: 0 -60

Relative humidity: 5%-90%

TP cable: Cat5 UTP cable

Fiber:50/125,62.5/125um multi-mode fiber ; 9/125,10/125um single-mode fiber.

Dimensions: 40mm x 110mm x 140mm

Installation

• Attach fiber cable from the media converter to the fiber network. The fiber connections must be

matched – transmit socket to receive socket, the TX ,RX fiber cable must be paired at both ends .

• Attach a UTP cable from the 10/100BASE-T network to the RJ-45 ports on the media converter .

• Connect the power adapter to the media converter and check that the Power LED lights up.

The LINK/ACT LEDs will light up when all the cable connections are satisfactory.

Ordering information:

Transmission characteristics of single fiber transceiver

Product model	Optical wavelength (m)	optical power (dBm)	Receiving sensitivity (dBm)	Transmission Distance (km)
DYS1400SS-SC-2 0A/B	1310/1550 1550/1310	-3 -8	<-22	20
DYS1400SS-SC-40A/B	1310/1550 1550/1330	0 -5	<-24	40
DYS1400SS-SC-60A/B	1310/1550 1550/1330	0 -3	<-25	60

Dual Fiber transmission features

Product model	Optical wavelength (nm)	Optical power (dBm)	Sensibility (dBm)	Transmission Distance (km)
DYS1400S-SC-5	850	-12 -15	<-20	0.55
DYS1400S-SC-20	1310	-3 -8	<-22	20
DYS1400S-SC-40	1310	0 -5	<-24	40
DYS1400S-SC-60	1310	0 -3	<-25	60
DYS1400S-SC-80	1550DFB	0 -1	<-25	80