Mitutoyo 543-260

 

 

Product Description:

The Mitutoyo 543-260 has an accuracy of .003mm and comes standard with a 8mm stem and a                       M2.5 x .45mm contact point thread. If you need this indicator but with a English/imperial stem and contact point size, the 543-262 is the correct Mitutuoyo electronic indicator.

Features:

With max./min. value holding function model of the ID-C Series Digimatic Indicators.

• The maximum, minimum, or runout value can be displayed during measurement.
• GO/±NG judgment is performed by setting the upper and lower tolerances for max., min. and runout values.
• High speed sampling ratio of 50 times/s.
• Employing the ABSOLUTE linear encoder, the Signal ID-C always displays the spindle "Absolute Position" from the origin at power-on.

Technical Data:

• Accuracy: Refer to the list of specifications.
• Resolution: 0.001mm, .00005"/0.001mm or .0001"/0.001mm
• Display: LCD
• Length standard: ABSOLUTE electrostatic capacitance type linear encoder
• Max. response speed: Unlimited
• Measuring force: 1.5N or less
• Battery: SR44 (2 pcs.), 938882
• Battery life: Approx. 800 - 1300 hours under normal use
• Dust/Water protection level: IP42

Features:

• Origin-set/Preset
• Zeroset
• GO/±NG judgment
• Max/Min/Runout value holding
• Counting direction switching
• Power ON/OFF
• Data output
• Inch/MM conversion (on inch/metric models only)
• Alarm: Low voltage
• Counting value composition error
• Over-flow error
• Tolerance limit setting error