Mô tả sản phẩm: Nexans LANmark-6A Snap-in Connector Cat 6A 500MHz Screened for stranded N420.67A
High bandwidth RJ45 connector to support 10Gigabit Ethernet
Fully complies to TIA and ISO Cat 6A cabling standards
Supports extremely short Cat 6A channel configuirations needed for datacenters
Fully screened for alien crosstalk immunity
Version for stranded wire to be used in Cross Connects and Consolidation Points
Supports AWG26 flex cable using special IDC contacts
Application
LANmark-6A EVO Snap-in Connector is a screened RJ45 cable jack specified up to 500MHz. It is designed specifically to support the high frequencies required for 10 Gigabit Ethernet, but is also fully backwards-compatible with lower frequency applications using the RJ45 interface. LANmark-6A EVO uses a fully closed rear cover, which provides 360° screening and excellent coupling attenuation to ensure immunity from alien crosstalk and other external interference. Cabling channels with LANmark-6A cable jack have not to be verified on site for Alien Crosstalk, as this new 10G parameter is met by design. This reduces significantly the cost for 10G networking.
10Base-T Ethernet
100Base-TX Fast Ethernet
1000Base-TX Gigabit Ethernet
10GBase-T 10 Gigabit Ethernet IEEE 802.3
155 Mbit ATM
1.2 Gbit ATM
all future Cat 6A and Class EA applications
Performance
The LANmark-6A EVO has outstanding electrical performance up to 500MHz especially for NEXT/FEXT, Power Sum NEXT/FEXT, Return Loss and all screening parameters. This enables to achieve high performing Cat 6A channels as well as very short link and channel configurations needed in data centres with up to 3 connection points within 10 meters.
Installation
LANmark-6A EVO makes use of Nexans wire organiser and is therefore very easy and fast to terminate. Using the Nexans comfort tool installation tool EVO Snap-In series is re-usable. Special IDC contacts allow the use of flexible stranded cable (AWG26).
The LANmark-6A EVO fits in all structural hardware designed for the EVO Snap-In range and can used in all positions of a 4 connector twisted pair cabling channel (PP, CC, CP, TO).
Fast termination with exclusive wire organizer and hinging metal EMC rear cover
Colour code : T568A &T568B
360° EMC protection
Re-usable with universal comfort tool
Accepts solid wire from 22 to 24 AWG
Stranded version available for consolidation point
Snap-in format fits in all Nexans structural hardware
2 possibilities to terminate the drain wire : on the housing or on the rear cover
Can be turned into keystone format using an additional adapter
Guarantees
When installed in combination with other LANmark-6A components, a 25 years channel warranty can be obtained, covering full 10GBase-T support and full Cat 6A/Class EA compliance.
Fully complies to TIA and ISO Cat 6A cabling standards
Supports extremely short Cat 6A channel configuirations needed for datacenters
Fully screened for alien crosstalk immunity
Version for stranded wire to be used in Cross Connects and Consolidation Points
Supports AWG26 flex cable using special IDC contacts
Application
LANmark-6A EVO Snap-in Connector is a screened RJ45 cable jack specified up to 500MHz. It is designed specifically to support the high frequencies required for 10 Gigabit Ethernet, but is also fully backwards-compatible with lower frequency applications using the RJ45 interface. LANmark-6A EVO uses a fully closed rear cover, which provides 360° screening and excellent coupling attenuation to ensure immunity from alien crosstalk and other external interference. Cabling channels with LANmark-6A cable jack have not to be verified on site for Alien Crosstalk, as this new 10G parameter is met by design. This reduces significantly the cost for 10G networking.
10Base-T Ethernet
100Base-TX Fast Ethernet
1000Base-TX Gigabit Ethernet
10GBase-T 10 Gigabit Ethernet IEEE 802.3
155 Mbit ATM
1.2 Gbit ATM
all future Cat 6A and Class EA applications
Performance
The LANmark-6A EVO has outstanding electrical performance up to 500MHz especially for NEXT/FEXT, Power Sum NEXT/FEXT, Return Loss and all screening parameters. This enables to achieve high performing Cat 6A channels as well as very short link and channel configurations needed in data centres with up to 3 connection points within 10 meters.
Installation
LANmark-6A EVO makes use of Nexans wire organiser and is therefore very easy and fast to terminate. Using the Nexans comfort tool installation tool EVO Snap-In series is re-usable. Special IDC contacts allow the use of flexible stranded cable (AWG26).
The LANmark-6A EVO fits in all structural hardware designed for the EVO Snap-In range and can used in all positions of a 4 connector twisted pair cabling channel (PP, CC, CP, TO).
Fast termination with exclusive wire organizer and hinging metal EMC rear cover
Colour code : T568A &T568B
360° EMC protection
Re-usable with universal comfort tool
Accepts solid wire from 22 to 24 AWG
Stranded version available for consolidation point
Snap-in format fits in all Nexans structural hardware
2 possibilities to terminate the drain wire : on the housing or on the rear cover
Can be turned into keystone format using an additional adapter
Guarantees
When installed in combination with other LANmark-6A components, a 25 years channel warranty can be obtained, covering full 10GBase-T support and full Cat 6A/Class EA compliance.
