Mô tả sản phẩm: Nexans LANmark-6A Ultim Patch Cords LSZH N11A.U1F010OK 1m
High speed RJ45 patch cord to run 10GBase-T and future Cat6A applications
High Density support : 48 cords on 1 height unit
Frequency range up to 500MHz, fully complies to Cat 6A TIA568B.2-10 and ISO11801(2010) A2
Individually screened pairs for reduced Internal Crosstalk and Alien Crosstalk immunity
Externally certified
Retrofit Latch Protector available in 8 colours for colour coding
Application
LANmark-6A Ultim cords are developed to support 10 Gigabit Ethernet (IEEE 802.3an) and any other future Cat.6A application.
LANmark-6A Ultim Cords offer superior performance up to 500MHz and are matched with other LANmark-6A components to provide improved data throughput in complex channel configurations. Ultim cords use stranded cable and as such provide maximum system flexibility for the use at Cross Connects and Consolidation points.
They will also maximise the lifetime and longevity of the system by minimising the risk of wear & tear damage. Due to their good electrical performance and mechanical stability, LANmark-6A Ultim cords can be used for accurate field testing of Cat 6A cabling channels.
Ultim Cords feature a slim boot for mechanical protection, which is kept inside the RJ45 boundaries to enable High Density Patching with 48 cords in 1 height unit.
They also come with a ‘Replaceable’ Latch Protector, which can be used for colour coding of different services.
Performance
The LANmark-6A Ultim cords fully comply and exceed the requirements of EIA/TIA-568-B.2-10 and ISO11801 A2 and enable to achieve high performing Cat 6A channels. Used with other LANmark-6A components, very short Cat 6A link and channel configurations with up to 3 connection points within 10 meters can be supported.
Guarantees
When installed in combination with other LANmark-6A components, a 25 years channel warranty can be obtained, covering full 10GBase-T support and full Cat 6A/Class EA compliance.
Usage
The cords are by design fully Alien Crosstalk compliant, so no special installation rules need to be taken into account for ANEXT and AFEXT compliance.
1, 2, 3, 5, 10, 20m are standard lengths available from stock, other lengths are available on demand.
Orange and Dark Grey are standard colours available from stock; other colours are available on demand.
Default Plug Configuration is a black boot with a preinstalled black latch protector.
High Density support : 48 cords on 1 height unit
Frequency range up to 500MHz, fully complies to Cat 6A TIA568B.2-10 and ISO11801(2010) A2
Individually screened pairs for reduced Internal Crosstalk and Alien Crosstalk immunity
Externally certified
Retrofit Latch Protector available in 8 colours for colour coding
Application
LANmark-6A Ultim cords are developed to support 10 Gigabit Ethernet (IEEE 802.3an) and any other future Cat.6A application.
LANmark-6A Ultim Cords offer superior performance up to 500MHz and are matched with other LANmark-6A components to provide improved data throughput in complex channel configurations. Ultim cords use stranded cable and as such provide maximum system flexibility for the use at Cross Connects and Consolidation points.
They will also maximise the lifetime and longevity of the system by minimising the risk of wear & tear damage. Due to their good electrical performance and mechanical stability, LANmark-6A Ultim cords can be used for accurate field testing of Cat 6A cabling channels.
Ultim Cords feature a slim boot for mechanical protection, which is kept inside the RJ45 boundaries to enable High Density Patching with 48 cords in 1 height unit.
They also come with a ‘Replaceable’ Latch Protector, which can be used for colour coding of different services.
Performance
The LANmark-6A Ultim cords fully comply and exceed the requirements of EIA/TIA-568-B.2-10 and ISO11801 A2 and enable to achieve high performing Cat 6A channels. Used with other LANmark-6A components, very short Cat 6A link and channel configurations with up to 3 connection points within 10 meters can be supported.
Guarantees
When installed in combination with other LANmark-6A components, a 25 years channel warranty can be obtained, covering full 10GBase-T support and full Cat 6A/Class EA compliance.
Usage
The cords are by design fully Alien Crosstalk compliant, so no special installation rules need to be taken into account for ANEXT and AFEXT compliance.
1, 2, 3, 5, 10, 20m are standard lengths available from stock, other lengths are available on demand.
Orange and Dark Grey are standard colours available from stock; other colours are available on demand.
Default Plug Configuration is a black boot with a preinstalled black latch protector.
| Characteristics | |
| Colour | Orange |
| Screen | Yes |
| Outer sheath | LSZH-FR |
| Dimensional Characteristics | |
| Nominal outer diameter | 6.0 mm |
| Electrical Characteristics | |
| Charateristic impedance | 100 Ohm |
| Usage Characteristics | |
| Range | LANmark-6A |
| Lengh | 1 m |
| Mechanical durability/matings | 750 |
| Fire retardant | IEC 60332 Part 1 |
| Component function | Patchcord |
| Category | Cat. 6A |
| Packaging | Box of 50 items |
