Mô tả sản phẩm: Engenius EGS2108P
Technical Specifications
Standard
Switching Capacity: 16Gbps
Max. Forwarding Rate (64kBytes): 14.88Mpps
Forwarding Mode: Store and Forward
Packet Buffer memory: 512Bytes
Flash Memory: 4Mbytes
Port Functions
8 10/100/1000Mbps Ports in the front panel
PoE Capability
PoE standard: Port 1~4 Support IEEE 802.3af
PoE Capable Ports: Port 1~4 can output up to 15.4W
Power budget: 61.6 Watts
LED Indicator
Device:
Power LED x1
Fault LED x1
PoE Max LED x1
LAN Mode LED x1
PoE Mode LED x1
Copper Ports:
LAN/PoE Mode, Link/Act
Environment & Mechanical
Temperature Range
Operating: 32 to 104°F / 0 to 40°C
Storage: -40 to 158°F / -40 to 70 °C
Humidity (non-condensing)
5% - 95%
L2 Features
Loopback Detection
IGMP Snooping v1/v2
Port Trunking
Port Mirroring: one to one and many to one
Static MAC Address
Dynamic MAC List
Bandwidth Control
802.1Q VLAN
Port-base VLAN
Storm Control
PoE Management
BootP/DHCP Client
Cable Diagnostic
Maximum data rates are based on IEEE 802.3ab standards. Actual throughput and range may vary depending on distance between devices or traffic and bandwidth load in the network. Features and specifications subject to change without notice. Trademarks and registered trademarks are the property of their respective owners. For United States of America: Copyright ©2013 EnGenius Technologies, Inc. All rights reserved. Compliant with FCC - This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his/her own expense.
