Mô tả sản phẩm: DCN DCRS-5960-28T
Giới thiệu
Dòng DCRS-5960 là 1 dòng switch lớp 3 Gigabit Ethernet với 20/44 cổng Gigabit Ethernet, 4 cổng combo Gigabit Ethernet RJ-45/SFP và 2 khe cắm cho các module lựa chọn 10G với tối đa 4 cổng 10G Ethernet.
Dòng DCRS-5960 lý tưởng cho các máy chủ tập trung hay các switch truy cập tập trung trong lớp phân phối của mô hình mạng 3 lớp. Nó cũng là 1 lựa chọn đúng đắn về switch core cho khách hàng là doanh nghiệp.
Tất cả các cổng của DCRS-5960-28T-POE và DCRS-5960-52T-POE có thể hỗ trợ công suất tối đa 15.4W cho IP Phone, WIFI AP, IP camera,… với hỗ trợ RPS/PSU.
Bảng thông số kỹ thuật:
| Attributes | DCRS-5960-28T-POE/52T-POE | DCRS-5960-28T/52T | DCRS-5960-28T-DC/52T-DC | ||
| Ports | 20/44 10/100/1000 Ethernet ports4 COMBO (SFP/GT)2 slots (max 4 10GE) | 20/44 10/100/1000 Ethernet Ports4 COMBO (SFP/GT)2 slots (max 4 10GE) | 20/44 10/100/1000 Ethernet Ports4 COMBO (SFP/GT)2 slots (max 4 10GE) | ||
| Performance | |||||
| Switching Capability | 128Gbps/196bps | 128Gbps/196bps | 128Gbps/196bps | ||
| Forwarding rate | 95Mpps/131pps | 95Mpps/131pps | 95Mpps/131pps | ||
| MAC Address | 16K | 16K | 16K | ||
| VLAN Table | 4K | 4K | 4K | ||
| ACL TABLE | Max 3k | Max 3k | Max 3k | ||
| Routing Table | Max 13K | Max 13K | Max 13K | ||
| VRF | 252 | 252 | 252 | ||
| L3 Interface | Max 1K | Max 1K | Max 1K | ||
| Port Queues | 8 | 8 | 8 | ||
| Physical | |||||
| Dimension (WHD) | 415mm×44mm×325mm | 415mm×44mm×325mm | 415mm×44mm×325mm | ||
| Relative Humidity | 5% ~ 90%, non-condensing | 5% ~ 90%, non-condensing | 5% ~ 90%, non-condensing | ||
| Operating Temperature | 0℃ ~ 50℃ | 0℃ ~ 50℃ | 0℃ ~ 50℃ | ||
| Storage Temperature | -40℃ ~ 70℃ | -40℃ ~ 70℃ | -40℃ ~ 70℃ | ||
| Power | AC: 100V ~ 240V, 50-60Hz DC: -48VPOE: -52V | AC: 100V ~ 240V, 50-60Hz | AC: 100V ~ 240V, 50-60Hz DC: -48V | ||
| Power Consumption | 130W/180W15.4W per port for POE | 130W/180W | 130W/180W | ||
| MTBF | >80,000 hours | >80,000 hours | >80,000 hours | ||
| MEF Comply | Comply MEF 9,14 | Comply MEF 9,14 | Comply MEF 9,14 | ||
| EMC safety | FCC, CE, RoHS, | FCC, CE, RoHS | FCC, CE, RoHS | ||
| Features | |||||
| Forwarding Mode | Storage and forwarding | ||||
| L2 Features | IEEE802.3(10Base-T)IEEE802.3u(100Base-TX)IEEE802.3z(1000BASE-X)IEEE802.3ab(1000Base-T)IEEE802.3ae(10Gbase)9k Jumbo Frame Port loopback detect LLDP and LLDP-MEDUDLD | ||||
| Support LACP 802.3ad, max 128 group trunk with max 8 ports for each trunk, Support load balance | |||||
| IEEEE802.1d(STP)IEEEE802.1W(RSTP)IEEEE802.1S(MSTP) Max 48 instance Root Guard Bpdu Guard BPDU forwarding | |||||
| Support one to one or any to one port mirror RSPAN | |||||
| IGMP v1/v2/v3 Snooping and L2 query ND snoopingMLDv1/v2 snooping | |||||
| QinQ, GVRP, Broadcast / Multicast / Unicast Storm Control Port/ MAC/ IP segment/ Protocol/ Voice/ Private/ Vlan support Multicast Vlan register/MVR for IPv4 and IPv6 service | |||||
| Support port-based 802.1Q, 4096 VLAN | |||||
| MAC filter, MAC limit | |||||
| MPLS | MPLS, VRF, LDP | ||||
| MPLS L3 VPN, MPLS L2 VPN(VPWS) | |||||
| L3 Features | IP Protocol (IP support both of IPv4 and IPv6) Support manual configure IPv4/IPv6 tunnel Support 6to4 tunnel Support ISATAP tunnel | ||||
| Default Routing, Static Routing, Black hole route, VLSM and CIDR, | |||||
| RIPv1/V2, OSPFv2, BGP4, support MD5 authentication LPM Routing | |||||
| OSPFv3, BGP4+ | |||||
| Policy based Routing(PBR) for IPv4 and IPv6 | |||||
| VRRP, VRRP v3 | |||||
| PIM-DM, PIM-SM, PIM-SSM, MSDP Static Multicast route PIM-SM/DM/SSM for IPv6, 6 to 4 Tunnels, configured Tunnels, ISATAP Multicast receive control Illegal multicast source detect Any cast RP for Ipv4 and Ipv6 | |||||
| Support ECMP(Equal Cost Multi-Path)with maxim 8 groups | |||||
| URPF for IPv4 and IPv6 | |||||
| Support BFD | |||||
| ARP guard, Local ARP proxy, Proxy ARP, ARP binding, Gratuitous ARP, ARP limit | |||||
| QoS | 8 queues per port | ||||
| Support traffic classification based on IEEE 802.1p, ToS, port and DiffServ | |||||
| Support SP, WRR.SWRR | |||||
| Support Traffic Shaping | |||||
| Support PRI Mark/Remark | |||||
| ACL | Support standard and expanded ACL Support IP ACL and MAC ACL Support ACL based on source/definition IP, MAC, L3 IP, TCP/UDP port number, IP PRI(DSCP, ToS, Precedence), Time Support time-based security auto-negotiation ACL rules can be configured to port, VLAN, VLAN routing interfaces Can be used for QoS classification | ||||
| Reliability | Support MSTP(802.1s)Support VRRP, LACP load balance MRPP – Multi-layer Ring Protection Protocol Redundant power supply, power load balancing Support Firmware & Configure dual fault tolerance backup | ||||
| DHCP | DCHP Client, Relay, Snooping, Option 82 | ||||
| DHCP Server for IPv4 and IPv6 | |||||
| DHCP v6 and DHCP snooping V6 | |||||
| Security | 802.1XSupport guest vlan and auto vlan MABGRE tunnel BPDU tunnel | ||||
| POE | Support max 15.4W per port and full 10/100/1000 Base-T port can support POE*The feature need RPS/PSU support | NA | NA | ||
| Management | CLI, Console (RS-232), Telnet (Ipv4/Ipv6), SSH (Ipv4/Ipv6), SSL connection Support WEB based NMS Support SNMPv1/v2c/v3 for IPv4, SNMPv1/v2c for IPv6Strict management hosts by ACLAAA or Local Authentication SNTP and NTP, Daylight Saving time Configuration file backup Multiple configuration files Support FTP/TFTP server or client upgrade Support X-modem protocol upgrade Support max 24 units cluster with 10GE ports and managed by single IP | ||||
| Supervision and Trouble Shooting | Supervise abnormity of task, memory, CPU, stack, switch chip, temperature and raise alarm Mirror based on port and flow, RSPAN Syslog Sflow for IPv4 and IPv6RMON 1, 2, 3, 9Ping and trace route command | ||||
