Đầu bút hút SUS syringe-type attachments

A minimum hole diameter of φ0.1 is available for handling ultra-light micro-components. With the use of the Air Pit air volume control screw, suction and release can be made very smooth indeed. Straight type, 45° angle type and elliptical suction hole types are available.

Needle length and hole diameter list

Hole diameter size		Product #
Inside diameter （I.D.） mm	Outside diameter （O.D.） mm	Straight			45°
		L1=29.35mm	L1=35.7mm	L1=48.4mm	L1=35.7mm
		L2=6.35mm	L2=12.7mm	L2=25.4mm	L2=12.7mm
0.1	0.23	ST-A0.1	ー	ー	ー
0.15	0.3	ー	ST-C0.15	ー	ST-R0.15
0.2	0.41	ー	ST-C0.2	ー	ST-R0.2
0.33	0.64	ー	ST-C0.33	ST-D0.33	ST-R0.33
0.51	0.81	ST-A0.51	ST-C0.51	ST-D0.51	ST-R0.51
0.84	1.27	ST-A0.84	ST-C0.84	ST-D0.84	ST-R0.84
1.37	1.65	ー	ST-C1.37	ST-D1.37	ST-R1.37
1.52	1.83	ー	ST-C1.52	ST-D1.52	ST-R1.52

Elliptical hole nozzle VAL-0.41

lliptical hole dimensions mm	L1 mm	L2 mm
0.41×1.98	35.7	12.7

The syringe-type attachments with elliptical holes are appropriate for the suction and manipulation of long and thin cylindrical objects such as dowel pins.

Conductive rubber pad attachments

Attachments with rubber pads are useful for suction and manipulation of relatively large and heavy objects. The hard rubbers do not deform easily and the suction hole diameters are large. For electrostatic protection, the silicone rubber is compounded with the carbon to improve its conductivity. [Volume resistivity value: 5 Ω cm]

Because of its high adhesion capacity, the rubber can be used to maintain the suction force of an object. You can safely use rubber pad attachments to manipulate lenses and prism glasses. (If you cannot release the object smoothly, loosen the airflow adjustment screw of the air pit.)