Nắp bồn câu thông minh BB-BC series
Point. 1: 100% Power Charge Save Monthly; Compared with Electronic Bidet!
No cost of maintenance by power consumption is needed entirely due to Non-electric power.
Point. 2: Simple Mechanical Design and Structure without Disorder;
It is economical by long life, compared with electronic bidet causing trouble for maintenance and repair further with high price also.
Point. 3: Clean Nozzle-Cleaning Function and Two-Nozzle System;
Danger of contamination is minimized by nozzle of clean chrome quality feeling exposed outside when using, And clean nozzle management is possible due to nozzle cleaning function. Also, cleaner general-washing and woman-washing can be obtained thanks to applying two nozzle system.
Point. 4: Safe "Bobslei" Bidet against Rinsing by Water from Shower
Rinsing allowed by shower or water makes bidet to be kept clean. "Bobslei" Bidet can be used with easiness due to no worry about disorder or fire causing from water since it doesn't require electric power for working.
Generally bidets are environmental products which reduces resource waste, and it reduces the cost of waste disposal that come out from Restroom by using less toilet paper. It also helps us to save our time and costs by helping us defecate, and it leads to reduce the time staying in restroom. BOBSLEI non-electric bidet enables us to adjust water temperature, water pressure, washing methods. It has very simple structure which operates by water pressure. No cost of maintenance by power consumption is needed entirely due to Non-electric power. Rinsing allowed by shower or water makes bidet to be kept clean without any risk of breakdown by short circuit. (Convenient of Maintenance And no other maintenance expense)
Installation:
1. Remove the existing toilet seat and lid and place the bidet properly as below. Rotate the installation board according to the toilet connection hole. When connecting it, nozzle part need to be placed in the middle of the bidet and inside part of the nozzle should adhere to inner part of the toilet.
2. Close the adjusting valve and remove the existing hot and cold water pipes by spanner. And, install the high pressure hose, adapter, rubber packing in regular order. Install the ball valve(included in the box) as below picture.
3. Adjust the water supply hose(white) rightly and connect to the water supply adapter and bidet. After connecting the water hose, push it hardly into one-touch insertion hole on the back side of the bidet BOBSLEI-Ⅱ model has two insertion holes for cold and hot water hose in the rear. BLUE(Cold)and RED(Hot) colors are displayed on it. - Take notice not to connect it in reverse
4. After installation of the bidet, check the nozzle at a right angle and use it.
