Mô tả sản phẩm: Bộ điều khiển chiều cao mỏ Wuxi Longteng XPTHC-100II
Stand alone THC, works with almost any plasma cutter, sale over 2000 sets per year
No need software, all functions can be easily operated on THC(as picture showed)
A.Auto Initial Height Sensing(IHS)
Torch Retaining Cap IHS and Proximity Switch IHS (NPN and PNP), Proximity Switch IHS is backup for Torch Retaining Cap IHS for cutting dirty/rusty workpiece, needing the Anti-Collision Fixture designed by HYD (optional ).
B.Torch Anti-Collision Function
We designed Touch-Up circuit for Anti-Collision Function. No matter it is on Auto Control Model or Manual Control Model, when torch head touches the workpiece, THC would automatically lift torch up to IHS height. So with XPTHC-100, even in Manual Control Model, user doesn’t need to worry about torch head crashing.
C. Freeze Auto Height Control on Corner Signal
XPTHC-100 can recognize Corner Signal from CNC and freeze Auto Control Model on receiving this signal, and we have a unique design to backup this function. We set 30V (adjustable) as Turning Point according to our years practice. When the Actual Arc Voltage is higher than Set Arc Voltage over 30V, THC Auto Control Mode freezes to avoid torch head diving, until it goes back to 30V range. This Over Voltage protection can avoid torch diving on voltage spikes (Corner Turning, Kerf Crossing) effectively.
D. Set Pierce Time
Set the Button (Set PIERE) to set Pierce Time.
E. Manual Operation
Many functions can be Manually operated on THC Operation Panel such as setting Auto/Manual, Up and Down, testing of IHS and Arc Start….etc
F. Arc Voltage Divide
Isolation Voltage Divide detection, the Voltage Divide ratio is 100:1/50:1. And XPTHC-100 supports different HF plasma.
Details
|
Full Name of Product |
Arc Voltage Torch Height controller |
|
Product Model |
XPTHC-100 |
|
Dimensions |
L*W*H: 320*260*90（mm） |
|
Supply voltage |
AC24V±10% 50Hz/60Hz |
|
Lifting motor |
DC24V DC motor |
|
Drive Method |
PWM (pulse width modulation ) |
|
Output current |
1A~4A, the maximum is 6A |
|
Output power |
100W |
|
Working temperature |
Torch height controller: -10℃~60℃ |
|
Initial height sensing |
Torch Retaining Cap IHS and Proximity Switch IHS |
|
Voltage Divide |
100:1/50:1 |
|
Control Accuracy |
±1V~±3V (adjustable by user) |
|
Cutting Torch Lifting Speed |
500 m/min~3000m/min（adjustable by user,over 3000m/min available.) |
