SPECIFICATIONS | Protek 1006 | Protek 1020 | Protek 1050 | Protek 1160 | Protek 1260 |
Vertical |
Channels | 2 | 2 | 2 | 2 | 2 |
Bandwidth | 60MHz | 200MHz | 500MHz | 600MHz | 600MHz |
Rise Time | 5.8 ns | 1.7 ns | 0.58ns |
Input Impedance | Resistance : 1 MΩ ; Capacitance : 15 pF |
Input Sensitivity | 10 mV /div to 5V /div |
Input Coupling | AC, DC with Ground Level Indicator |
Vertical Resolution | 8 bits |
Memory Depth | 32K at Single Channel, 16K at Dual Channel |
Maximum Input | 300V (DC + AC Peak) |
Horizontal |
Sampling | 150MSa/s | 250MSa/s | 500mSa/s | 1GSa/s | 2GSa/s |
Equivalent Max. Sampling Rate is 50GSa /S for all items |
Time Base Range | 5ns/div ~ 1000s/div | 2ns/div ~1000s/div | 1ns/div ~ 1000s/div |
Time Base Precision | ± 50ppm |
Trigger |
Source | CH1, CH2 |
Mode | Edge, Pulse Width, Alternative | Edge, Video, Pulse Width, Alternative |
X-Y mode |
X-Axis Input | Channel 1 |
Y-Axis Input | Channel 2 |
Phrase Shift | Max. 3 degree |
Cursors and Measurement |
Voltage measurement | Vpp, Vamp, Vmax, Vmin, Vtop, Vmid, Vbase, Vavg, Vrms,Vcrms,Preshoot, Overshoot |
Time Measurement | Frequency, Rise Time, Fall Time, Positive Width, Negative Width, Duty Cycle |
Delay Measurement | Delay 1 -> 2 , Delay 1 -> 2 |
Cursors Measurement | Manual, Track, Auto Measure Modes |
Waveform Signal Process | CH1 ± CH2, CH1 x CH2, CH1 / CH2, FFT, Invert |
Storage | 15 Waveforms and Setups |
Bình luận