Cảm Biến Quang Điện Balluff Bgl 30A-001-S49, Balluff Bgl 30C-005-S4

Liên hệ

D3, Kdc Miếu Nổi, Đinh Tiên Hoàng, F3, Q Bình Thạnh

ANS Việt Nam là công ty XNK hàng đầu và là nhà cung cấp chuyên nghiệp các mặt hàng “Máy móc và các thiết bị, dụng cụ đo lường, kiểm tra công nghiệp/điện-tự động hóa”

Hãy cung cấp thông tin về bất cứ sản phẩm bạn đang cần, chúng tôi bảo đảm về chất lượng, dịch vụ và giá cả tổt nhất.

Hãy liên hệ với chúng tôi để có giá tốt nhất.

0938.214.498 / 0986.025.980 |Mr Cảnh|

Email: canh.ans@ansvietnam.com

Công ty chúng tôi là đại diện phân phối của hãng Balluff các sản phẩm sau:

Fork sensor

Order Code : BGL0016
BGL 30A-001-S49

Keyfeatures

Output signal	PNP (1X), NO/NC
Light source, light type	LED, red light
Connection	Connector, M8x1-S49
Ambient temperature	-10...60 °C
Series	Series A
Design	Slot, straight connection
Slot width	30 mm
Smallest part, typical	0,3
Degree of protection as per IEC 60529	IP67
Switching freq. f max.	1500 Hz

General attributes

Switching freq. f max.	1500 Hz
Basic standard	IEC 60947-5-2
Short-circuit protected	Yes
Degree of protection as per IEC 60529	IP67
Protected against polarity reversal	Yes
Additional text	The sensor is functional again after the overload has been eliminated. Reference object (test target): Steel sheet metal, 50 x 50, thickness 0.5 mm, lateral approach. Factory default setting for switching output: Normally open. Only for NFPA 79 applications (machines with a supply voltage of maximum 600 volts). Device shall be connected only by using any R/C (CYJV2) cord, having suitable ratings. For additional information, refer to user''s guide. Order accessories separately.
Series	Series A
Indicator	Output function - LED YE
Setting	Light-on/dark-on Sensitivity
Adjuster	Potentiometer 270° (2x)
Trade name	Global

Electrical attributes

Rated operating voltage Ue DC	24
Effective operating current Ie	200 mA
Rated insulation voltage Ui	75 V DC
Electrical version	DC, direct current
Load capacitance max. (at Ue)	1 µF
Ripple max. (% of Ue)	10
Switching output	PNP (1X)
Switching function	NO/NC
Turn-off delay toff max.	0,333 ms
Turn-on delay ton max.	0,333 ms
Hysteresis H max.	0,1 mm
No-load current max. Io at Ue	35 mA
Voltage drop Ud max. (at Ie)	3.0 V
Operating voltage	10...30 V DC

Mechanical attributes

Connector type	M8x1-S49
Surface protection	Painted
Ambient temperature Ta max.	60 °C
Ambient temperature Ta min.	-10 °C
Sensing surface material	Glass
Housing material	GD-Zn
Mounting type	Screw M4
Design	Slot, straight connection
Slot width	30 mm
Smallest part, typical	0,3
Repeat accuracy lateral max.	20 µm
Beam characteristic	Divergent
Length 1	10
Length 2	68 mm
Length 3	50 mm

Order Code : BGL0033
BGL 30C-005-S4

Keyfeatures

Output signal	PNP (1X), NO/NC, 0...10 V
Light source, light type	LED, red light
Connection	Connector, M12x1-S04
Ambient temperature	-5...55 °C
Series	Series C
Design	Slot, straight connection
Slot width	30 mm
Degree of protection as per IEC 60529	IP65
Switching freq. f max.	500 Hz

General attributes

Switching freq. f max.	500 Hz
Basic standard	IEC 60947-5-2
Short-circuit protected	Yes
Degree of protection as per IEC 60529	IP65
Protected against polarity reversal	Yes
Additional features	Soiling compensation to up to 10% loss in intensity.
Additional text	The sensor is functional again after the overload has been eliminated. Reference object (test target): Steel sheet metal, 50 x 50, thickness 0.5 mm, lateral approach. For additional information, refer to user''s guide. Order accessories separately. Do not press key using a pointed tool.
Series	Series C
Indicator	Output function - LED YE Error - 2 x LED YE, flash.
Setting	Light-on/dark-on Output curve rise/fall Switching/Error output Sensitivity
Adjuster	Key (2x)

Electrical attributes

Rated operating voltage Ue DC	24,0
Effective operating current Ie	100 mA
Electrical version	DC, direct current
Load capacitance max. (at Ue)	2,2 µF
Ripple max. (% of Ue)	10
Switching output	PNP (1X)
Switching function	NO/NC
Turn-off delay toff max.	1,000 ms
Turn-on delay ton max.	1,000 ms
Hysteresis H max.	0,400 mm
No-load current max. Io at Ue	30 mA
Voltage drop Ud max. (at Ie)	1.0 V
Supplementary output	Error output PNP
Switch func. supplementary output	NO/NC
Analogue output	analog U
Value range analogue	0...10 V
Operating voltage	18...30 V DC

Mechanical attributes

Connector type	M12x1-S04
Surface protection	Anodized
Ambient temperature Ta max.	55 °C
Ambient temperature Ta min.	-5 °C
Sensing surface material	PMMA
Housing material	Aluminum
Mounting type	Screw M5
Design	Slot, straight connection
Slot width	30 mm
Repeat accuracy lateral max.	150 µm
Beam characteristic	Divergent
Resolution	0,08 mm
Length 1	18,0
Length 2	93,5 mm
Length 3	80 mm

Optical attributes

Principle of optical operation	Through-beam
Switching function, optical	NO/NC: dark-on/light-on
Light spot size, typical	3.0 x 28.0 mm light exit
Light type	LED, red light
Wavelength	633 nm
Ambient light max.	5,000 Lux
Optical special feature	Light band
Active length AL	AL = 28 mm
Number of beam paths	10 beams
LED group per IEC 62471	Exempt group

Chúng tôi rất mong được hợp tác thành công và vui vẻ với Quý khách!

Võ Hồng Cảnh |Canh Mr|
I Sales Eng . I
====================
I cellphone I +84 986025980
+84 938214498
I email I canh.ans@ansvietnam.com

Từ khóa gợi ý: Cảm Biến Balluff Cảm Biến Sensor Balluff Bgl Paragon Balluff Germany Sensor Balluff Balluff Sensor Balluff - Đức Balluff Đức Beurer Bgl 40 Dong Ho Bgl Cam Bien Balluff Cảm Biến Quang Điện Quang Điện Cảm Biến Cảm Biến Điện Quang Cảm Biến Quang Cảm Biến Quang Cảm Biến Quang Điện Sick Cảm Biến Quang Điện Omron Cảm Biến Quang Điện Bm Cảm Biến Quang Điện Bw

Bình luận

Võ Hồng Cảnh

HẾT HẠN

Mã số :	7909592
Địa điểm :	Hồ Chí Minh
Hình thức :	Cần bán
Tình trạng :	Hàng mới
Hết hạn :	09/07/2019
Loại tin :	Thường