Cảm biến tiệm cận từ cảm loại dẹt
Cảm biến tiệm cận từ cảm loại dẹt - Sử dụng IC chế tạo theo công nghệ C-MOS (Hàng đầu thế giới) - Khả năng chống nhiễu tốt - Bảo vệ IP67 (Tiêu chuẩn IEC)
Đặc tính kỹ thuật
- Có mạch bảo vệ nối ngược cực nguồn, quá áp.
- Có thể kiểm tra trạng thái hoạt động bằng chỉ thị LED Đỏ
- Tuổi thọ dài và độ tin cậy cao
- Khoảng cách phát hiện: 8mm
- Kích thước: 25 x 49 x 10.5mm
- Nguồn cấp: Loại 3 dây nguồn 12-24 VDC hoặc 2 dây nguồn 100~240VAC
- Tần số đáp ứng loại DC 200 Hz., AC 20Hz
- Kiểu đầu ra: DC 3dây (NPN, PNP), DC 2 dây, AC 2 dây.
- Trạng thái đầu ra: NO / NC
Ứng dụng
- Với khả năng phát hiện vật thể từ tính (Kim loại), Cảm biến từ cảm Hanyoung phù hợp với các ứng dụng phát hiện, đếm sản phẩm trong các dây truyền công nghiệp....
Model | D.C 3 wire type | D.C 2 wire type | NPN | UP25F-8N![](http://hynux.net/eng/up_img/imgbox/spuare.gif) ![](http://hynux.net/eng/up_img/imgbox/spuare.gif) | Polarity | UP25F-8T![](http://hynux.net/eng/up_img/imgbox/spuare.gif) ![](http://hynux.net/eng/up_img/imgbox/spuare.gif) | PNP | UP25F-8P![](http://hynux.net/eng/up_img/imgbox/spuare.gif) ![](http://hynux.net/eng/up_img/imgbox/spuare.gif) | No Polarity | UP25F-8U![](http://hynux.net/eng/up_img/imgbox/spuare.gif) ![](http://hynux.net/eng/up_img/imgbox/spuare.gif) | Size | 25 X 49 Flat type | 25 X 49 Flat type | Standard sensing object | Iron 25 X 25 X 1 | Sensing distance | 8 mm | Setting distance | 0 ~ 6.4mm | Hysteresis | Less than 10% of sensing distance | Response frequency | 200 Hz | Power supply voltage | 12 - 24 V a.c (Usable voltage range 5 - 35 V d.c) | 12 - 24 V a.c (Usable voltage range 10 - 30 V d.c) | Control output | Open/Close capacitance | 200 ㎃ max (Resistive load) | 100 ㎃ max (Resistive load) | Residual voltage | Max 1.5 V | Polarity : max 3.5 V, No polarity : max 5 V | Current consumption | Max 6 mA | - | Leakage current | - | Max 1 mA | Operation indication | Red LED | Protective circuit | Power reversely connected protective circuit, Surge protective circuit and over current protective circuit are built in. | Degree of protection | IP67 (IECstandard) | Connection structure | Cable type(Standard cable length 2m), Relay connector type | Material | Case : PBT resin, Cable holder : Polyester elastomer | Weight | Cable type | approx. 60g | approx. 60g | Relay connector type | approx. 20g | approx. 20g |
Inductive A.C 2 wire typeModel | UP25F-8A![](http://hynux.net/eng/up_img/imgbox/spuare.gif) ![](http://hynux.net/eng/up_img/imgbox/spuare.gif) | Standard sensing object | Iron 25 x 25 x 1 | Sensing distance | 8 mm | Setting distance | 0 ~ 6.4mm | Hysteresis | Less than 10% of sensing distance | Response frequency | 20 Hz | Power supply voltage | 100 - 240 V a.c (Usable voltage range 90 - 250V a.c ) | Control output | 200 mA max (Resistive load) | Current consumption | Max 10 Va.c | Leakage current | Max 2.2 mA | Operation indication | Red LED | Protective circuit | Surge protective circuit built in. | Degree of protection | IP67 (IEC standard) | Connection structure | Cable type(Standard cable length 2m), Relay connector type | Material | Case : PBT resin, Cable holder : Polyester elastomer | Weight | Cable type | approx. 60g | Relay connector type | approx. 20g |
| |
|
| |
| |
Bình luận