Cảm Biến Tiệm Cận Từ Cảm Loại Tròn - Hàn Quốc

Liên hệ

Số 30, Ngõ 44, Đường Võ Thị Sáu, Hai Bà Trưng, Hà Nội


Cảm biến tiệm cận từ cảm loại tròn

- Sử dụng IC chế tạo theo công nghệ  C-MOS (Hàng đầu thế giới)

- Khả năng chống nhiễu tốt

- Bảo vệ IP67 (chống bụi, chống nước)




- Có mạch bảo vệ nối ngược cực nguồn, quá áp.

- Có thể kiểm tra trạng thái hoạt động bằng chỉ thị LED Đỏ

- Tuổi thọ dài và độ tin cậy cao

- Khoảng cách phát hiện: 1,5mm, 2mm, 4mm, 5mm, 8mm, 10mm,  15 mm

- Kích thước: M8, M12, M18, M30 mm

- Nguồn cấp: Loại 3 dây nguồn 12-24 VDC hoặc 2 dây nguồn 100~240VAC

- Tần số đáp ứng nên tới 800 Hz.

- Kiểu đầu ra: DC 3dây (NPN, PNP), DC 2 dây, AC 2 dây.

- Trạng thái đầu ra: NO / NC


- Với khả năng phát hiện vật thể từ tính (Kim loại), Cảm biến từ cảm Hanyoung phù hợp với các ứng dụng phát hiện, đếm sản phẩm trong các dây truyền công nghiệp....

       




ModelNPNUP8RM-1.5NUP8RD-2NUP12RM-2NUP12RD-4NUP18RM-5NUP18RD-8N
PNPUP8RM-1.5PUP8RD-2PUP12RM-2PUP12RD-4PUP18RM-5PUP18RD-8P
SizeM8M12M18
ShieldShieldNone shieldShieldNone shieldShieldNone shield
Standard sensing object mmIron 8 X 8 X 1Iron 12 X 12 X 1Iron 18X18X1Iron 25 X 25 X 1
Sensing distance1.5 mm2 mm2 mm4 mm5 mm8 mm
Setting distance0 ~ 1.2 mm0 ~ 1.6 mm0 ~ 1.6 mm0 ~ 3.2 mm0 ~ 4 mm0 ~ 6.4 mm
HysteresisLess than 10% of sensing distance
Response frequency800 Hz800 Hz400 Hz350 Hz200 Hz
Power supply voltage12 ~ 24 V d.c (Usable voltage range 5 - 35V d.c)
Control outputOpen/Close capacitance : 200 mA Max. (Resistive load), Residual voltage : Max 1.5 V
Current consumptionMax 6 mA
Operation indicationRed LED
Protective circuitPower reversely comeded prodective circuit, surge prote ctive circuit and over current protective circuit are built in.
connection structureCable type (standard cable length 2m), Relay connector type, Connector type
MaterialCase: stainless, Sensing surface: PBT, Cable holder: Polyester elastomerCase: brass(chrome plating), Sensing surface: PBT, Cable holder: Polyester elastomer
WeightCable typeapprox. 60gapprox. 60gapprox. 70gapprox. 70gapprox. 120gapprox. 120g
Relay connector typeNoneNoneapprox. 30gapprox. 30gapprox. 80gapprox. 80g
Connector typeNoneNoneapprox. 30gapprox. 30gapprox. 60gapprox. 60g

Inductive D.C 3 Wire type

ModelNPNUP18RLM-5NUP18RLD-8NUP30RM-10NUP30RD-15NUP30RLM-10NUP30RLD-15N
PNPUP18RLM-5PUP18RLD-8PUP30RM-10PUP30RD-15PUP30RLM-10PUP30RLD-15P
SizeM18M30M30
ShieldShieldNone shieldShieldNone shieldShieldNone shield
Standard sensing object mmIron 18 X 18 X 1Iron 25 X 25 X 1Iron 30 X 30 X 1Iron 45 X 45 X 1Iron 30 X 30 X 1Iron 45 X 45 X 1
Sensing distance5 mm8 mm10 mm15 mm10 mm15 mm
Setting distance0 ~ 4 mm0 ~ 6.4 mm0 ~ 8 mm0 ~ 12 mm0 ~ 8 mm0 ~ 12 mm
HysteresisLess than 10% of sensing distance
Response frequency350 Hz200 Hz250 Hz100 Hz250 Hz100 Hz
Power supply voltage12 ~ 24 V d.c (Usable voltage range5 - 35V d.c)
Control outputOpen/Close capacitance : 200 mA Max. (Resistive load), Residual : Max1.5 V
Current consumptionMax 6 mA
Operation indicationRed LED
Protective circuitPower reversely connected protective circuit, Surge protective circuit and over current protective circuit are bult in.
connection structureCable type (standard cable length 2m), Relay connector type, Connector type
MaterialCase : brass(chrome plating), Sensing surface: PBT, Cable holder: Polyester elastomer
WeightCable typeapprox. 140gapprox. 140gapprox. 170gapprox. 170gapprox. 220gapprox. 220g
Relay connector typeapprox. 100gapprox. 100gapprox. 130gapprox. 130gapprox. 180gapprox. 180g
Connector typeapprox. 80gapprox. 80gapprox. 150gapprox. 150gapprox. 200gapprox. 200g


Inductive D.C 2 wire type (Polrity/No polarity)

Model유극성UP8RM-1.5TUP8RD-2TUP12RM-2TUP12RD-4TUP18RM-5TUP-18RD-8T
무극성UP8RM-1.5UUP8RD-2UUP12RM-2UUP12RD-4UUP18RM-5UUP-18RD-8U
SizeM8M12M18
ShieldShieldNone shieldShieldNone shieldShieldNone shield
Standard sensing object mmIron 8 X 8 X 1Iron 12 X 12 X 1Iron 18X18X1Iron 25X25X1
Sensing distance1.5 mm2 mm2 mm4 mm5 mm8 mm
Setting distance0 ~ 1.2 mm0 ~ 1.6 mm0 ~ 1.6 mm0 ~ 3.2 mm0 ~ 4 mm0 ~ 6.4 mm
HysteresisLess than 10% of sensing distance
Response frequency800 Hz800 Hz400 Hz800 Hz400 Hz
Power supply voltage12 ~ 24 V d.c (Usable voltage range10 - 30V d.c)
Control outputOpen/Close capacitance : 100 mA Max.(Resistive load), Residual voltage: T (polarty) : max 3.5 V, U (No polarity): max5V
Leakage currentMax 1 mA
Operation indicationRed LED
Protective circuitPower reversely connected protective circuit, surge protective circuit and over current protective circuit are built in.
connection structureCable type(standard cable length 2 m), Relay connector type, Connector type
MaterialCase: stainless, Sensing surface:PBT, Cable holder: Polyester elastomerrCase: brass(chrome plating), Sensing surface: PBT, Cable holder: Polyester elastomer
WeightCable typeapprox. 60gapprox. 70gapprox. 120gapprox. 120g
Relay connector typeNoneapprox. 30gapprox. 80gapprox. 80g
Connector typeNoneapprox. 30gapprox. 60gapprox. 60g


Inductive D.C 2 wire type

ModelPolarityUP18RLM-5TUP18RLD-8TUP30RM-10TUP30RD-15TUP30RLM-10TUP30RLD-15T
No PolarityUP18RLM-5UUP18RLD-8UUP30RM-10UUP30RD-15UUP30RLM-10UUP30RLD-15U
SizeM18M30M30
ShieldShieldNone shieldShieldNone shieldShieldNone shield
Standard sensing object mmiron 18 X 18 X 1iron 25 X 25 X 1iron 30 X 30 X 1iron 45 X 45 X 1iron 30 X 30 X 1iron 45 X 45 X 1
Sensing distance5 mm8 mm10 mm15 mm10 mm15 mm
Setting distance0 ~ 4 mm0 ~ 6.4 mm0 ~ 8 mm0 ~ 12 mm0 ~ 8 mm0 ~ 12 mm
HysteresisLess than 10% of sensing distance
Response frequency800 Hz400 Hz250 Hz100 Hz250 Hz100 Hz
Power supply voltage12 ~ 24 V d.c (Usable voltage range10 - 30V d.c)
Control outputOpen/Close capacitance : 100 mA Max. (Resistive load), Residual voltage: T(Polarity) : max 3.5 V, U(No polarity) :max 5 V
Leakage currentMax 1 mA
Operation indicationRed LED
Protective circuitPower reversely connected protective circuit, surge protective circuit and over current protective circuit are built in.
connection structureCable type(standard cable length2 m), Relay connector type, Connector type
MaterialCase: brass(chrome plating), Sensing surface: PBT, Cable holder : Polyester elastomer
WeightCable typeapprox. 140gapprox. 140gapprox. 170gapprox. 220g
Relay connector typeapprox. 100gapprox. 100gapprox. 130gapprox. 180g
Connector typeapprox. 80gapprox. 80gapprox.110gapprox. 200g


Inductive A.C 2 wire type

ModelFor A.CUP12RM-2AUP12RD-4AUP18RM-5AUP18RD-8AUP18RLM-5A
SizeM12M18M18
ShieldShieldNone shieldShieldNone shieldShield
Standard sensing objectIron 12 x 12 x 1 mmIron 18 x 18 x 1 mmIron 25 x 25 x 1 mmIron 18 x 18 x 1 mm
Sensing distance2 mm4 mm5 mm8 mm5 mm
Setting distance0 ~ 1.6 mm0 ~ 3.2 mm0 ~ 4.0 mm0 ~ 6.4 mm0 ~ 4.0 mm
HysteresisLess than 10% of sensing distance
Response frequency20 Hz
Power supply voltage100 ~ 240 V a.c(Usable voltage range90 - 250 V a.c)
Control outputOpen/Close capacitance : 200 mA Max. (Resistive load), Residual voltage: Max 10 V
Leakage currentMax 2.2 mA
Operation indicationRed LED
Protective circuitSurge Protective circuit built in.
connection structureCable type(standard cable length 2 m), Relay connector type, Connector type
MaterialCase: brass (chrome plating), Sensing surface:PBT, Cable holder :Polyester elastomer
WeightCable typeapprox. 70gapprox. 70gapprox. 120gapprox. 140g
Relay connector typeapprox. 30gapprox. 30gapprox. 80gapprox. 100g
Connector typeapprox. 30gapprox. 30gapprox. 60gapprox. 80g


Inductive A.C 2 wire type

ModelFor A.CUP18RLD-8AUP30RM-10AUP30RD-15AUP30RLM-10AUP30RLD-15A
SizeM18M30M30
ShieldNone shieldShieldNone shieldShieldNone shield
Standard sensing object철 25 x 25 x 1 mm철 30 x 30 x 1 mm철 45 x 45 x 1 mm철 30 x 30 x 1 mm철 45 x 45 x 1 mm
Sensing distance8 mm10 mm15 mm10 mm15 mm
Setting distance0 ~ 6.4 mm0 ~ 8.0 mm0 ~ 12.0 mm0 ~ 8.0 mm0 ~ 12.0 mm
HysteresisLess than 10% of sensing distance
Response frequency20 Hz
Power supply voltage100 ~ 240 V a.c(Usable voltage range90 - 250 V a.c)
Control outputOpen/Close capacitance : 200 mA Max. (Resistive load), Residual voltage: Max 10 V
Leakage currentMax 2.2 mA
Operation indicationRed LED
Protective circuitSurge Protective circuit built in.
connection structureCable type(standard cable length 2 m), Relay connector type, Connector type
MaterialCase: brass (chrome plating), Sensing surface:PBT, Cable holder :Polyester elastomer
WeightCable typeapprox. 140gapprox. 170gapprox. 170gapprox. 220gapprox. 220g
Relay connector typeapprox. 100gapprox. 130gapprox. 130gapprox. 180gapprox. 180g
Connector typeapprox. 80gapprox. 150gapprox. 150gapprox. 200gapprox. 200g


Suffix code



Model CodeInformation
UP
-

inductive type proximity sensor

Sensing type 8M8
12M12
18M18
30M30
Structure typeRMRound type Shield
RDRound type None Shield
RLMRong round type shield(M8 and M12 are excluded)
RLDLong round type None shield (M8 and M12 are excluded)
Sensing Distance *Please refer to the sensing distance of each specification (unit : mm)

Power and Output type
ND.C NPN output
PD.C PNP output
AA.C 2 wire type
TD.C 2 wire type(Polarity)
UD.C 2 wire type(No polarity) ��� But M8 is excluded
Output state ANormal open(N.O)
CNormal close(N.C)
Connection structure*No indication (Cable type)
CRRelay connector type
CConnector type



Bình luận

HẾT HẠN

0905 261 889
Mã số : 7406452
Địa điểm : Hà Nội
Hình thức : Cần bán
Tình trạng : Hàng mới
Hết hạn : 03/05/2020
Loại tin :

Thường

Để mua hàng an toàn trên Rao vặt, quý khách vui lòng không thực hiện thanh toán trước cho người đăng tin!

Gợi ý cho bạn