Cảm Biến Tiệm Cận Đo Độ Rung Trục, Độ Đồng Trục Quay Động Cơ, Hãng Metrix Vietnam

Liên hệ

D3, Kdc Miếu Nổi, Đinh Tiên Hoàng, P.3, Q.bình Thạnh

Hãy liên hệ trực tiếp với chúng tôi

CÔNG TY TNHH THƯƠNG MẠI DỊCH VỤ ANH NGHI SƠN

========== Online contact ==========

| Yahoo | thanh_ans | Skype | vithanh_ans

để được hỗ trợ TỐT NHẤT với thời gian NHANH NHẤT !

******

Công ty chúng tôi xin gửi đến Quý khách hàng thông tin của Model sản phẩm như sau:

Proximity

Proximity probe systems measure axial or radial shaft motion for machine protection applications. Metrix offers an array of probes, cables and drivers that are interchangeable with competitive probe systems from Bently Nevada and others. Replace individual components with our ProxMatch™ color coding system or purchase a complete Digital Proximity System consisting of a probe, extension cable and a MX2033 Driver or a MX2034 Transmitter.

	Condition Monitoring The SETPOINT family of products includes a rack-based machinery protection platform and online condition monitoring software powered by PI® that deliver complete API-670 compliance. Visit www.metrixsetpoint.com for more detailed information.
	Digital Proximity System The Metrix Digital Proximity System is digitally reconfigurable in the field to work with nearly any probe/cable and target-material combination. It''''s fully API 670 compliant and supports probes from a variety of manufacturers including Bently Nevada. The DPS consists of a probe, an extension cable, and a signal conditioner. MX2030 Probe Series MX2031 Cable Series MX2033 3-Wire Driver MX2034 4-20 mA Transmitter
	Probes Metrix proximity probes are interchangeable with Bently Nevada Series 3300, 7200, and 3000. All probes incorporate the latest technology and include agency approvals. MX2030 Probe Series 10000 (3000) Probe Series 10000 (7200) Probe Series: 5 & 8mm 10000 (7200) Probe Series: 11 mm 10000 (7200) Probes: High Pressure
	Cables Metrix cables are interchangeable with Bently Nevada cables Series 3300, 7200, and 3000. Available with or without armor in lengths to match your system requirements. MX2031 Cable Series 3000 Series Cable 7200 Series Cable (5 & 8 mm) 7200 Series Cable (11mm) 7200 Series Cable (Sealed Feed Through)
	Drivers Metrix proximity drivers are interchangeable with Bently Nevada Series 3300, 7200, and 3000 probes and cables. The flexible Metrix MX2033 Driver can be reconfigured to handle any of these probe / cable combinations. MX2033 3-Wire Driver 5533 Probe Driver
	Vibration Transmitters Metrix proximity vibration transmitters are compatible with Bently Nevada Series 3300, 7200, and 3000 probes and cables as well as our own probes and cables. The flexible Metrix MX2034 Transmitter can be reconfigured to handle any of these probe / cable combinations. MX2034 4-20 mA Transmitter TXR 5521 RPM Transmitter TXR Transmitter TXA Transmitter
	Signal Conditioners Metrix proximity signal conditioners are used with existing drivers. They power the driver and scale the 4-20 mA output. 5510C Signal Conditioners 5516C Signal Conditioners
	Accessories A full line of accessories for mounting probes and WP or EP enclosures for drivers, transmitters and signal conditioners. Weatherproof Housing Probe Mounting Bracket 1/2” NPT Tapped Hole Bushing 3/4” NPT Tapped Hole Bushing Static Calibrator Signal Cable Proximity Probe Housing

Horizontal Pumps

A pump is a device that moves a gas or liquid from one area to another. This can be done by accelerating the liquid using centrifugal forces (centrifugal/rotodynamic pumps) or by grabbing a certain amount of liquid and physically pushing it towards where it needs to go (positive displacement pumps). Pumps are perhaps the most widely used mechanical devices and their designs vary as much as their applications.

Centrifugal Pump Monitoring Options

440 Switch with External Sensor Provides local contacts as well as 4-20mA output for interface with PLC. Sensor is located on pump while440 switch is located in a more electronic friendly environment.		SA6200A and 5535 Provides 4-20mA output for interface with a PLC / DCS. Dynamic signal is available from front panel for vibration analysis purposes. Provides options for custom filters, local display/indication, or galvanic isolation.

ST5484E / ST5491E The ST5484E provides for the simplest installation available. Since it’s a loop-powered device, only two wires are needed for full operation. The ST5484E is connected directly to a PLC / DCS. Optional filtering and dynamic outputs are available. The ST5491E has a local indicator.		Special Case - Large Vertical Pumps Large pump applications, such as the one shown above, require a more thorough monitoring scheme than smaller applications. Metrix provides a vibration sensor for all bearings, an impact sensor to detect cavitations, and a Datawatch monitor. The Datawatch monitors all vibration and temperature readings and compares them to pre-programmed setpoints in order to change the state of alarm and danger relay outputs.
Special Case - Pumps with Journal Bearings Journal bearings use a layer of oil to isolate the shaft from the bearing. Therefore, the shaft is actually floating on a cushion of oil and has no contact with any other metal. Because of the oil layer, a vibration signal produced by the shaft does not have a path to travel to the machine casing. That means that a seismic sensor placed on the case of the pump cannot properly sense what is going on with the shaft. This makes it necessary to use proximity sensors to detect shaft faults. A proximity probe mounts through the case of the machine and senses the position of the shaft relative to the probe tip. The pump casing holds the probe steady so that any movement in the shaft will cause the proximity probe / transmitter to give an indication. This type of measurement is termed “relative” because the shaft movement is being measured in relation to the machine casing.

Seismic

Seismic vibration instrumentation is used to measure structural vibration on bearing housings, piping, machinery housings, and machine support structures. It is particularly suitable for machinery with rolling-element bearings. These types of bearings will generally transmit both shaft-and bearing-related vibration to the outside of the machine where it can be detected by seismic measurements.

	Sensors Seismic sensors provide a dynamic AC signal output in mV/g or mV/in/sec. Devices with this type of output are generally intended for connection to a stand-alone vibration monitoring system rather than general automation and control instrumentation like a PLC or DCS. Metrix offers seismic sensors with a wide variety operating temperatures, frequency responses, scale factors, case materials, connector types, mounting options, and hazardous area approvals. SA6200A Gen. Purpose Accelerometer SA6200 API-670 Accelerometer SA6200UW Underwater Accelerometer SA6250 High-Freq Accelerometer SA6350 High Temp. Accelerometer SV6300 Piezo-Velocity Sensor 5485C High Temp. Velocity Sensor SA6210 Low-Profile Accelerometer
	Transmitters Seismic transmitters provide a 4-20mA DC signal output proportional to the vibration amplitude, and are ideal for applications where a PLC, DCS, or other automation system will be used instead of a stand-alone vibration monitor. Metrix offers seismic transmitters with a wide variety operating temperatures, frequency responses, scale factors, case materials, connector types, mounting options, and hazardous area approvals. ST5484E Velocity Transmitter ST5491E Indicating ST6900 Compact Series IT6810 Impact IT6811 Impact IT6812 Impact 162VTS Slim
	Signal Conditioners Seismic signal conditioners are designed to accept an input from (and provide power to) a seismic sensor. They convert the signal to a proportional 4-20mA DC signal that can be used as an input to process control instrumentation such as a PLC or DCS. They provide additional convenience features such as optional displays, BNC connectors for access to the dynamic sensor signal, and bandpass filtering. Metrix offers seismic signal conditioners that can accept either acceleration or velocity sensors, and are available with or without an integral display. 5534, 5544 Velocity Signal Cond. 5535, 5545 Accelerometer Signal Cond.
	Accessories Seismic accessories include bushings, mounting adapters, junction boxes, conduit fittings, cable assemblies, and other items used when installing sensors, transmitters, and signal conditioners. These accessories provide enviromental protection from dust, moisture, and corrosion, robust mechanical protection from the rigors of industrial use, and facilitate professional installation where wiring can be properly terminated, routed, and labeled.

Từ khóa gợi ý: Đo Độ Đồng Trục Cảm Biến Đo Độ Rung Trục Quay 360 Độ Cảm Biến Trục Cơ Cảm Biến Độ Rung Cảm Biến Tiệm Cận Cảm Biến Tiệm Cận - Cảm Biến Tiệm Cận Đo Độ Cận Thiết Bị Đo Độ Đồng Trục Máy Đo Độ Rung Động Cơ Cảm Biến Đo Nhiệt Độ Độ Trục Cam Độ Thiết Bị Đo Độ Trục Đo Độ Rung Đo Độ Rung Cảm Biến Trục Cơ Lanos Cảm Biến Trục Cơ Lacetti Cảm Biến Trục Cơ Ford Cảm Biến Độ Rung 643A01

Bình luận

Lương Vi Thành

HẾT HẠN

Mã số :	11098944
Địa điểm :	Hồ Chí Minh
Hình thức :	Cần bán
Tình trạng :	Hàng mới
Hết hạn :	27/12/2020
Loại tin :	Thường