Mart 10 Wt3-200, Wt3001, Wt3002, Wt3003 Máy Đo Lực Căng Dây Kéo Mart 10 Wt3-200E, Mart 10 Wt3-200U, Mart 10 Wt3-200A

Watch the Video:

Data Sheet

User''s Guide

The WT3-200 wire terminal pull tester is designed to measure the pull-off force of wire and tube terminations. An ergonomic lever allows for easy application of up to 200 lbF (1000 N) of pull force. Adjustable wire terminal grip contains multiple slots for wire diameters up to AWG 3 (0.25 in [6.3 mm]).

A large, backlit graphic LCD displays easy-to-read values, including real-time force, peak force, programmable pass/fail limits, units of measurement, and more. Data can be transferred to a PC or other data collector via USB, RS-232, Mitutoyo (Digimatic), or analog outputs. An analog load bar is shown on the display for graphical representation of applied force.

On-board data storage for up to 1,000 readings is included, as are statistical calculations and output to a PC. Unique automatic output / data storage / zeroing upon sample break helps automate testing processes.

An optional ring terminal fixture may be used to secure ring terminations, and an optional carrying case makes transportation simple and safe.

Roll over image to magnify

• Measures real-time and peak force values
• Ergonomic lever operation produces 200 lbF [1,000 N]
• USB, RS-232, Mitutoyo (Digimatic), and analog outputs
• Automatic output / data storage / zeroing upon sample break helps automate testing processes
• 1,000-point data memory with statistics and outputs
• Password protection prevents unauthorized changes
• Programmable set point indicators and outputs for pass/ fail determination
• High-speed 7,000 Hz sampling rate accurately captures peak force values
• Configurable audio alarms and key tones
• Mounting holes for bench mounting
• CE mark

Capacity x Resolution:	200 x 0.1 lbF, 3200 x 2 ozF, 100 x 0.05 kgF, 1000 x 0.5 N, 1 x 0.0005 kN
Accuracy:	±0.2% of full scale
Wire gauge range*:	AWG30 - AWG3*
Wire diameter range:	0.01 - 0.25 in [0.3 - 6.3 mm]
Sample length range:	Minimum 7.50 in [191.0 mm], excluding termination, unlimited length
Maximum sample elongation:	1.15 in [29.2 mm]
Power:	AC or rechargeable battery. Multi-step low battery indicator is displayed, gauge shuts off automatically when power is too low.
Battery Life:	Backlight on: up to 7 hours of continuous use Backlight off: up to 24 hours of continuous use
Sampling rate:	7,000 Hz
Outputs:	USB / RS-232: Configurable up to 115,200 baud. Mitutoyo (Digimatic): Serial BCD suitable for all Mitutoyo SPC-compatible Devices. Analog: ±1 VCD, ±0.25% of full scale at capacity. Set points: Three open drain lines.
Safe overload:	150% of full scale (display shows “OVER” at 110% and above)
Weight:	16.0 lb [7.3 kg]
Included items:	Universal voltage AC adapter, battery, quick-start guide, USB cable, resource CD (USB driver, MESURTMLite software, MESURTMgauge DEMO software, and user''s guide), NIST-traceable certificate of calibration
Warranty:	3 years (see individual statement for further details)

• 
  Ring terminal fixture <<
  Multiple pin sizes are provided, from 1/8" to 3/8" [3.2 to 9.5 mm] dia.


• 
  Carrying case >>
  Provides storage space for the WT3-200 tester, optional ring terminal fixture, AC adapter, USB cable, and accessories.


• 
  Machinable blank terminal fixture <<
  For unique sample shapes and sizes.


• 
  << MESURgauge Software - tabulates and plots force vs. time. Also calculates statistics, exports to Excel, and more. More info...


• 
  >> Calibration kit
  Complete set of brackets and hardware for calibration of a WT3-200. Weights not available from Mark-10. More info...