Somas Kvtf-C/Kvxf-C F Ball Segment Valve Kvtf-C5-Akb-B11-Dn400-Pn8

Somas Vietnam chuyên cung cấp các loại Van công nghiệp như: Van bi bán phần (Ball segment valves), Van bi (Ball valves), Van bướm (Butterfly Valves), Actuators, Positioners, Check valves....

Quý khách có nhu cầu về Somas Vietnam, xin vui lòng liên hệ:

Le Dac Hoang  IMr. RickI
I Technical Support I & I Senior sales eng. I
=======================
I cellphone  +84 908 450 258
I email I  hoang.ans@ansvietnam.com

Online contact==============================================

                     Nick Yahoo:   dachoang_ans                     Nick Skype:  dachoang_ans

Website: www.tudonghoa.ansvietnam.com

Hân hạnh cung cấp Somas Ball segment valve Somas Vietnam - Somas KVTF-C/KVXF-C F Ball segment valve Vietnam

Somas Vietnam - Van bi Somas Vietnam

Thông số kỹ thuật / Specification

Type KVTF-C/KVXF-C F                  langed design Short face to face
     Nominal pressure                             PN 25 / ASME Class 150
     Nominal size                                   DN 80 - 400 / NPS 3” - 16”
     Material                                          Stainless steel

The SOMAS KVTF-C is a flanged ball segment valve with centrically mounted shaft and KVXF-C is a flanged ball segment valve with eccentrically mounted shaft. The valve body is in one piece. Face to face dimensions in accordance with EN558:2008-series 36 and ISA 75.04S. Shaft piece is also in one piece for backlash free torque transmission. The spring loaded seat is available in three different materials (PTFE, PTFE 53 and HiCo).

Bảng chọn Code

Ứng dụng / Application

The valves can be used for control, as well as for shut-off applications on practically every type of media within a wide temperature range. Choose KVTF-C for liquids, media containing impurities etc. For dry and clean media choose KVXF-C. In the KVXF-C valve the ball segment is eccentrically mounted and rotates out from the seat when the valve is opened. This reduces the wear on seat and segment.
Low noise trim is available as an option. The designation “LN” indicates that the ball segment is equipped with a network of bars that are used to split up the pressure drop across the valve. This results in less pressure recovery, thereby reducing the noise and potential damage due to cavitation. Note! Capacity factors will be reduced for valves with LN-trim.
Ball segment with V-groove is available for use at high fiber concentrations. The V-groove design prevents dewatering at small opening angles.
The SOMAS valves are delivered ready for installation and operation. The valve assemblies are delivered factory tested as complete units with actuators, positioners and accessories.