Uv 3.8 K Van Điều Khiển Áp Suất Uv 3.8 K Mankenber Viet Nam

Mail: thietbicongnghiepltt@gmail.com

Liên hệ với chúng tôi để có thêm thông tin và giá tốt nhất!

PRESSURE CONTROL
Back pressure regulators UV 3.8K
Valve for viscous media

Technical data

Connection DN 15 - 100
Connection G 1/2 - 2
Nominal pressure PN 10 - 16
Inlet pressure 2 - 16 bar
Kvs-value 3.5 - 9 m³/h
Temperature 150 °C
Medium liquids and gases
*RT = -10 °C up to + 50 °C

Description

Self-acting back pressure regulators are simple control valves offering accurate control while being easy to install and maintain. They control the pressure upstream of the valve without requiring pneumatic or electrical control
elements.
The backpressure regulator UV 3.8K is a piston-controlled , spring-loaded
proportional valve for viscous media at medium flow rates. The valve cone is
provided with a metallic seal.
The inlet pressure to be controlled is balanced across the valve seat by the
force of the valve spring (set pressure). If the inlet pressure rises above the
set pressure, the valve opens. With decreasing inlet pressure the valve control orifice reduces. When the pipeline is depressurised, the valve is closed.
Rotating the adjusting screw clockwise increases the inlet pressure.
These valves are no shut-off elements ensuring a tight closing of the valve.
In accordance with DIN EN 60534-4 and/or ANSI FCI 70-2 they may feature
a leakage rate in closed position in compliance with the leakage classes III.

Standard
» Medium wetted parts made of stainless steel
» Piston controlled

Options

» Electro-pneumatic actuation
» For toxic or hazardous media: sealed bonnet complete with leakage line
connection (incl. sealed adjusting screw). Must be installed with a leakage line capable of draining leaking medium safely and without pressure
» Various O-ring and seal materials suitable for your medium
» Special connections: ANSI or JIS flanges, NPT, welding spigots; other
connections on request
» Special versions on request

Technical specification

*overall length tolerances in acc. with DIN EN 558

*overall length tolerances in acc. with DIN EN 558