Novacomet-Comap

      BP 1800
This second stage low pressure regulator is designed for use in domestic installation up to 200 000 BTU/hr after a first stage regulator or an HP changeover regulator.

DESIGN

• Body and cover in die cast zinc alloy
• Diaphragm: synthetic rubber
• Valve pad: synthetic rubber
• Minimum working temperature: -4 °F / -20 °C
• Maximum working temperature : +140°F / +60°C
• Minimum inlet pressure: 7 Psig- 0,5 bar
• Maximum inlet pressure:60 Psig -4 bar

      BP 1903
This second stage low pressure regulator is designed for use in domestic installation up to 200 000 BTU/hr after a first stage regulator or an HP changeover regulator.

DESIGN

• Body and cover in die cast zinc alloy
• Diaphragm: synthetic rubber
• Valve pad: synthetic rubber
• Minimum working temperature: -4 °F / -20 °C
• Maximum working temperature : +140°F / +60°C
• Minimum inlet pressure: 7 Psig- 0,5 bar
• Maximum inlet pressure: 60 Psig - 4 bar
• Manometer: no
• Safety relif set at delivery pressure +12/24 inches wc, +30/60 mbar

      BP 1910
This second stage low pressure regulator is designed for use in commercial installation up to 240 000 BTU/hr after a first stage regulator or an HP changeover regulator.
The outlet pressure adjustment is made at preestablished values by rotation of the knob.

DESIGN

• Body and cover in die cast zinc alloy
• Diaphragm: synthetic rubber
• Valve pad: synthetic rubber
• Minimum working temperature: -4 °F / -20 °C
• Maximum working temperature : +140°F / +60°C
• Minimum inlet pressure: 7 Psig- 0,5 bar
• Maximum inlet pressure: 60 Psig - 4 bar

      BP 2202
This second stage low pressure regulator is designed for use in commercial installation up to 300 000 BTU/hr after a first stage regulator or an HP changeover regulator.

DESIGN

• Body and cover in die cast aluminium alloy
• Diaphragm: synthetic rubber
• Valve pad: synthetic rubber
• Minimum working temperature: -4 °F / -20 °C
• Maximum working temperature : +140°F / +60°C
• Minimum inlet pressure: 7 Psig- 0,5 bar
• Maximum inlet pressure: 60 Psig - 4 bar
• Safety relif set at delivery pressure +12/24 inches wc, +30/60 mbar

      BP 2205
This second stage low pressure regulator is designed for use in commercial installation up to 475 000 BTU/hr after a first stage regulator or an HP changeover regulator.

DESIGN

• Body and cover in die cast zinc alloy
• Diaphragm: synthetic rubber
• Valve pad: synthetic rubber
• Minimum working temperature: -4 °F / -20 °C
• Maximum working temperature : +140°F / +60°C
• Minimum inlet pressure: 7 Psig- 0,5 bar
• Maximum inlet pressure: 60 Psig - 4 bar
• Safety relif set at delivery pressure +12/24 inches wc, +30/60 mbar

      BP 2210
This second stage low pressure regulator is designed for use in commercial installation up to 475 000 BTU/hr after a first stage regulator or an HP changeover regulator.

DESIGN

• Body and cover in die cast zinc alloy
• Diaphragm: synthetic rubber
• Valve pad: synthetic rubber
• Minimum working temperature: -4 °F / -20 °C
• Maximum working temperature : +140°F / +60°C
• Minimum inlet pressure: 7 Psig- 0,5 bar
• Maximum inlet pressure: 60 Psig - 4 bar
• Safety relif set at delivery pressure +12/24 inches wc, +30/60 mbar

      APZ 120
This single stage high pressure regulator is intended for use in small size installation up to 400 000 BTU/hr It reduces cylinders pressure down to 7 to 45 Psig and can be used for torches, burners,poultry warming.
The models 2150AX,2150BX,2005AX and 2150FX are adjustable with an external handwheel.

DESIGN

• Body and cover in die cast zinc alloy
• Diaphragm: synthetic rubber
• Valve pad: synthetic rubber
• Minimum working temperature: -4 °F / -20 °C
• Maximum working temperature : +140°F / +60°C
• Minimum inlet pressure: 40 Psign- 2,8 bar
• Maximum inlet pressure: 230 Psig - 16 bar
• Manometer: for adjustable models pressure port =1/8"

      APZ 400
This compact first stage regulator is intended for use in medium size installations up to 3 800 000 BTU/hr.
They are usually installed as tank first stage regulator.

DESIGN

• Body and cover in die cast zinc alloy
• Diaphragm: synthetic rubber
• Valve pad: synthetic rubber
• Minimum working temperature: -4 °F / -20 °C
• Maximum working temperature : +140°F / +60°C
• Minimum inlet pressure: 40 Psign- 2,8 bar
• Maximum inlet pressure: 290 Psig - 20 bar
• Manometer: pressure port 1/4"

      APS 1000
This first stage regulator is intended for use in medium size commercial and industrial installations up to 6 000 000 BTU/hr.

DESIGN

• Body and cover in die cast aluminium alloy
• Diaphragm: synthetic rubber
• Valve pad: synthetic rubber
• Minimum working temperature: -4 °F / -20 °C
• Maximum working temperature : +140°F / +60°C
• Minimum inlet pressure: 40 Psign- 2,8 bar
• Maximum inlet pressure: 290 Psig - 20 bar
• Manometer: 2 pressure port 1/4"

      5165 BP
This changeover regulator is designed for use in domestic installations up to 190 000 BTU / hr.

        Its built-in second stage regulator makes it easy to use 2 x 2 cylinders installations. A built-in indicator shows that the change from service to reserve has been made automatically.

DESIGN

• Body and cover in die cast zinc alloy
• Diaphragm: synthetic rubber
• Valve pad: synthetic rubber
• Minimum working temperature: -4 °F / -20 °C
• Maximum working temperature : +140°F / +60°C
• Minimum inlet pressure: 25 Psig- 1,7 bar
• Maximum inlet pressure:290 Psig -20 bar

     COMPACT 80 OPSO
This second stage low pressure regulator is designed for use in domestic installation up to 200 000 BTU/hr after a first stage regulator or an HP changeover regulator.

DESIGN

• Body and cover in die cast zinc alloy
• Diaphragm: synthetic rubber
• Valve pad: synthetic rubber
• Minimum working temperature: -4 °F / -20 °C
• Maximum working temperature : +140°F / +60°C
• Minimum inlet pressure: 7 Psig- 0,5 bar
• Maximum inlet pressure: 60 Psig - 4 bar
• Manometer: no
• Safety relif set at delivery pressure +12/24 inches wc, +30/60 mbar