|
|
|
![](http://www.comapindia.com/images/Prod_Gas_BP1800.jpg)
BP 1800 | BP 1800 This second stage low pressure regulator is designed for use in domestic installation up to 200 000 BTU/hr after a first stage regulator or an HP changeover regulator. DESIGN
- Body and cover in die cast zinc alloy
- Diaphragm: synthetic rubber
- Valve pad: synthetic rubber
- Minimum working temperature: -4 °F / -20 °C
- Maximum working temperature : +140°F / +60°C
- Minimum inlet pressure: 7 Psig- 0,5 bar
- Maximum inlet pressure:60 Psig -4 bar
|
|
|
![](http://www.comapindia.com/images/Prod_Gas_BP1903.jpg)
BP 1903 | BP 1903 This second stage low pressure regulator is designed for use in domestic installation up to 200 000 BTU/hr after a first stage regulator or an HP changeover regulator. DESIGN
- Body and cover in die cast zinc alloy
- Diaphragm: synthetic rubber
- Valve pad: synthetic rubber
- Minimum working temperature: -4 °F / -20 °C
- Maximum working temperature : +140°F / +60°C
- Minimum inlet pressure: 7 Psig- 0,5 bar
- Maximum inlet pressure: 60 Psig - 4 bar
- Manometer: no
- Safety relif set at delivery pressure +12/24 inches wc, +30/60 mbar
|
|
|
![](http://www.comapindia.com/images/Prod_Gas_BP1910.jpg)
BP 1910 | BP 1910 This second stage low pressure regulator is designed for use in commercial installation up to 240 000 BTU/hr after a first stage regulator or an HP changeover regulator. The outlet pressure adjustment is made at preestablished values by rotation of the knob. DESIGN
- Body and cover in die cast zinc alloy
- Diaphragm: synthetic rubber
- Valve pad: synthetic rubber
- Minimum working temperature: -4 °F / -20 °C
- Maximum working temperature : +140°F / +60°C
- Minimum inlet pressure: 7 Psig- 0,5 bar
- Maximum inlet pressure: 60 Psig - 4 bar
|
|
|
![](http://www.comapindia.com/images/Prod_Gas_BP2202.jpg)
BP 2202 | BP 2202 This second stage low pressure regulator is designed for use in commercial installation up to 300 000 BTU/hr after a first stage regulator or an HP changeover regulator. DESIGN
- Body and cover in die cast aluminium alloy
- Diaphragm: synthetic rubber
- Valve pad: synthetic rubber
- Minimum working temperature: -4 °F / -20 °C
- Maximum working temperature : +140°F / +60°C
- Minimum inlet pressure: 7 Psig- 0,5 bar
- Maximum inlet pressure: 60 Psig - 4 bar
- Safety relif set at delivery pressure +12/24 inches wc, +30/60 mbar
|
|
|
![](http://www.comapindia.com/images/Prod_Gas_BP2205.jpg)
BP 2205 | BP 2205 This second stage low pressure regulator is designed for use in commercial installation up to 475 000 BTU/hr after a first stage regulator or an HP changeover regulator. DESIGN
- Body and cover in die cast zinc alloy
- Diaphragm: synthetic rubber
- Valve pad: synthetic rubber
- Minimum working temperature: -4 °F / -20 °C
- Maximum working temperature : +140°F / +60°C
- Minimum inlet pressure: 7 Psig- 0,5 bar
- Maximum inlet pressure: 60 Psig - 4 bar
- Safety relif set at delivery pressure +12/24 inches wc, +30/60 mbar
|
|
|
![](http://www.comapindia.com/images/Prod_Gas_BP2210.jpg)
BP 2210 | BP 2210 This second stage low pressure regulator is designed for use in commercial installation up to 475 000 BTU/hr after a first stage regulator or an HP changeover regulator. DESIGN
- Body and cover in die cast zinc alloy
- Diaphragm: synthetic rubber
- Valve pad: synthetic rubber
- Minimum working temperature: -4 °F / -20 °C
- Maximum working temperature : +140°F / +60°C
- Minimum inlet pressure: 7 Psig- 0,5 bar
- Maximum inlet pressure: 60 Psig - 4 bar
- Safety relif set at delivery pressure +12/24 inches wc, +30/60 mbar
|
|
Bình luận