T7800-Txi7850-T6100-M4000Abp-Mp2400-T9000-Fairchild Vietnam-Đại Lý Phân Phối Chính Thức Fairchild Vietnam

Pressure Regulators

M4100A Low Pressure Regulator
Output Pressures as low as 1" water column [2.5 cm] are held reliably with our new M4100 Low Pressure regulator. Trust Fairchild''s M4100 when you need tight control at low pressure setpoints.

M72 High Performance Mini-Regulator
When you need high accuracy in a tiny package, the M72 is the Miniature Pressure Regulator for the job. It delivers accuracy with 0.025 psi max supply pressure effect to hold setpoint regardless of fluctuating supply.

M4000ABP High Flow Back Pressure Regulator
Fast response and high flow is often critical to maintaining tank pressures in back pressure applications. With its Flow Capacity of 150 SCFM [255 m3/hr], the new M4000ABP delivers top performance for your BP application needs.

MP2400 Low Pressure Motorized Regulator
Automation is King with our new Low Pressure Motorized Regulator. Originally designed for Natural Gas distribution systems, the new MP2400LP locks in last position and uses power only when pressure adjustment is required.

Model 11 and 11BP Low Pressure Regulators
Output Pressures as low as 0.1 psig are held reliably with our new M11 Low Pressure regulator. Trust Fairchild''s M11 when you need tight control at low pressure setpoints in a compact design. Pressure ranges from 0-0.5 to 0-12 psi.

Model 55 Minature Pressure Regulator
The Fairchild Model 55 is a compact precision polymer pressure regulator for high performance applications where space or weight may be limited or material compatibility concerns dictate use of a polymer construction regulator. Stability of regulated pressure is maintained under varying flow conditions through the use of an aspirator tube which adjusts the supply valve in accordance with the flow velocity. The Model 55 pneumatic regulator features control sensitivity of 5" water column to deliver consistent and reliable precision accuracy to maintain your desired set point regardless of supply pressure changes or conditions. The Fairchild Model 50 pressure regulator will handle a 150 psi, 10 BAR maximum supply pressure and offers four (4) set point pressure ranges from 0-10 psi, 0-0.7 BAR, 0-70 kPa up to 2-100 psi, 0.1-7 BAR, 15-700 kPa.

Model 67 Precision Stainless Steel Fuel Control Regulator
The directly-controlled Model 67 stainless steel regulator precisely controls fuel pressures in ranges from minus 6 to 60 psi. The large diaphragm actuator with directlycontrolled valve gives excellent response characteristics with very low hysteresis. High precision control is achieved by its forcebalanced valve, with a newly developed patented smooth running seal system. Specially developed for the high precision and reliability requirements of modern engine test equipment, the M67 is suitable for all fuels such as gasoline, diesel, biodiesel (RME), aviation fuel, methanol,ethanol, petrol mixtures E5 to E100 and diesel mixtures B5 to B100.

HPP High Pressure Regulator
The Rotork Fairchild HPP is a High Pressure Regulator designed for applications that have high supply pressures and require a much lower output pressure. The HPP pressure regulator is constructed of rugged 316L Stainless Steel for corrosion resistance and durability. The HPP is available in a 2 or 4 port configuration. The Fairchild HPP pressure regulator will handle a 6000 psi, 414 BAR, maximum supply pressure and offers four (3) output pressure ranges from 0-1000 psi, 0-68.9 BAR, 0-6,890 kPa, up to 0-3000 psi, 0-206.8 BAR, 0-20,680 kPa. The HPP high pressure regulator also offers a supply valve Cv of 0.06. The Rotork Fairchild HPD incorporates a new patented valve and valve seat to prevent leakage, which commonly occurs with high supply pressures.

HPD High Pressure Regulator
The Rotork Fairchild HPD is a High Pressure Regulator designed for applications that have high supply pressures and require a much lower output pressure. The HPD pressure regulator is constructed of rugged 316L Stainless Steel for corrosion resistance and durability. The HPD is available in a 2 or 4 port configuration. The Rotork Fairchild HPD pressure regulator will handle a 6000 psi, 414 BAR, maximum supply pressure and offers five (5) output pressure ranges from 0-25 psi, 0-1.7 BAR, 0-170 kPa, up to 5-500 psi, 0.35-35 BAR, 35-3500 kPa. The HPD high pressure regulator also offers a supply valve Cv of 0.06. The HPD high pressure regulator also offers a supply valve Cv of 0.06. The Fairchild HPD incorporates a new patented valve and valve seat to prevent leakage, which commonly occurs with high supply pressures.

Model 17 High Precision Vacuum Regulator
The M17 Vacuum Regulator is a true performer in vacuum applications. With its triple balanced range spring construction it holds a vacuum setpoint with the precision you need for tough applications.

High Pressure 24XFM Motorized Regulator
The Fairchild 24XFM Motorized Regulator provides no bleed automated lock in last position control for higher pressure gas applications. With its pulse DC Voltage control, the 24XFM offers high precision pressure control and can be set for very slow speed operation to ensure smooth, consistent performance when used as either a main valve or a pilot control device. Put a 24XFM to work in your gas automation application today for dependable, maintenance free service.

Electro-Pneumatic Transducers

T9000 Series Pressure Controller
The Fairchild T9000 Series Electro-Pneumatic Pressure Controller has a closed-loop, integrated, microprocessor control system that regulates outlet pressure. The Model T9000 controls pressure in proportion to an analog electrical input signal. An internal feedback sensor monitors output pressure to achieve high accuracy. You can control the output from the Model T9000 using the keypad or from an analog control signal. You can control the output from the Model T9000D using the keypad and through DeviceNet™ Communication network. With its integral booster sections, the T9000 series of I/P pressure controllers delivers high accuracy at flow capacities of 1 SCFM in the T9000, 90 SCFM in the T9020, 110 SCFM in the T9040, 220 SCFM in the T9060, and 700 SCFM in the T9080.

TD8600 P/I Pressure Transmitter
You''ve depended upon Fairchild for years for your pressure control needs. The same Fairchild high quality manufacturing that you know and trust brings you a new P/I pressure transmitter that is rugged and provides accurate pressure measurement for your monitoring needs. The new TD8600 uses piezo and thin film technology to offer a rugged but inexpensive solution that is small and fits into hard-to-access areas.

Low Emission TXI7850 I/P
Rotork Fairchild''s New Explosion Proof TXI7850 Low Emission I/P Pressure Transducer operates under the same basic principles as the standard TXI7850, yet improves upon fugitive emissions of natural gas. The TXI7850 is specifically designed to meet and exceed the most stringent emission and carbon reduction restrictions with natural gas! The Low Emission TXI7850 delivers vibration, shock and moisture resistance in output pressures up to 0-30 psi [0-2.0 BAR], (0-200 kPa). It carries full Agency Approvals, including FM, CSA and ATEX certifications.

T6100 Lock In Place I/P Transducer
Peace of mind and reliable operation are two benefits you get from the new T6100 "Lock in Last Position" I/P transducer. The T6100 uses proven actuation means, coupled with patented locking technology to provide you with the answer to your tough applications.

Pneumatic Volume Boosters

M20BP Volume Booster
Fairchild''s M20BP is a smaller Back Pressure Pneumatic Booster designed for automation or remote controlling of the back pressure or relief operation typically found in tank systems and other pressurized systems. In its pilot operated design, the M20BP will operate from a signal pressure of up to 150 psig [10.0 BAR] (1000kPa) and handles up 250 psig, [17.0 BAR], (1700 kPa) system pressure. The Fairchild Model 20BP Back Pressure Booster provides a flow capacity of 45 SCFM (76.5 m3/HR), which equates to a Cv factor of approximately 1.0.

M4500ABP Back Pressure Volume Booster
Fairchild’s M4500ABP is a High Flow Back Pressure Booster designed for automation or remote controlling of the back pressure or relief operation typically found in tank systems and other pressurized systems. In its pilot operated design, the M4500ABP will operate from a signal pressure of up to 150 psig [10.0 BAR] (1000kPa) and handles up 250 psig, [17.0 BAR], (1700 kPa) system pressure. The Fairchild Model 4500ABP Back Pressure Booster provides a flow capacity of 150 SCFM (255 m3/HR), which equates to a Cv factor of approximately 3.0.

M4900A Volume Booster
Fairchild’s M4900A is a High Flow Pneumatic Volume Booster designed for high precision applications. With its Cv of 9 in both forward and exhaust modes, this pilot operated booster provides fast response, very low deadband and high precision control. In its pilot operated regulator design, the M4900A handles up 250 psig, [17.0 BAR], (1700 kPa) supply pressure and delivers an output pressure up to 150 psig [10.0 BAR] (1000kPa). The Fairchild Model 4900A Booster provides a flow capacity of 500 SCFM (850 m3/HR), which equates to a Cv factor of approximately 9 in both forward and exhaust modes.

Filters and Accessories

FR - Filter Regulator
Take full advantage of compressed gases in pneumatic systems. The gas must be adequately prepared. Fairchild''s new FR preparation package provides the clean and dry air essential for optimum performance of pneumatic systems. With their modular construction, the FR unit provides compact efficiency, high flow, and superior 5 micron filtration.

Pneumatic volume boosters feature high flow capacity and fast response. A wide range of signal to output pressure ratios, pipe sizes and options are available in Fairchild''s pilot operated regulator booster products with a Cv of 1 up to a Cv of 18, with flow capacities of 45 SCFM, 76.5 m3/hr up to 1500 SCFM, 2550 m3/hr.

Model 2000 - 40 SCFM [68 m3/Hr] Forward/Exhaust Flow No Bleed Volume Booster (M2000) The Model 2000 Pneumatic Volume Booster converts a low flow signal to a high flow output. It is ideally suited for a variety of applications including the operation of air systems that require rapid valve or cylinder action. As a pilot operated regulator design, the M2000 handles up to 250 psig, [17.0 BAR], (1700 kPa) supply pressure. The Fairchild Model 2000 provides a flow capacity of 40 SCFM (68 m3/HR), which results in a Cv factor of just less than 1.0 in forward flow mode.

Model 20 - 45 SCFM [76.5 m3/Hr] Forward/Exhaust Flow Volume Boosters (M20) The Model 20 Volume Booster is a smaller pneumatic device capable of high flow and exhaust capacity. This device uses a force balance system to control the movement of the supply and exhaust valves. As a pilot operated regulator design, the M20 handles up to 150 psig, [10.0 BAR], (1000 kPa) supply pressure and has ten available ratios to cover a wide range of applications. The Fairchild Model 20 Booster provides a flow capacity of 45 SCFM (76.5 m3/HR), which equates to a Cv factor of approximately 1.0 in both forward and exhaust modes.

M20 Back Pressure Pneumatic Booster (M20BP) Fairchild''s M20BP is a smaller Back Pressure Pneumatic Booster designed for automation or remote controlling of the back pressure or relief operation typically found in tank systems and other pressurized systems. In its pilot operated design, the M20BP will operate from a signal pressure of up to 150 psig [10.0 BAR] (1000kPa) and handles up 250 psig, [17.0 BAR], (1700 kPa) system pressure. The Fairchild Model 20BP Back Pressure Booster provides a flow capacity of 45 SCFM (76.5 m3/HR), which equates to a Cv factor of approximately 1.0.

Model 4500 - 150 SCFM [255 m3/Hr] Forward/Exhaust High Flow No Bleed Volume Boosters (M4500A) Fairchild''s Model 4500 Pneumatic Volume Booster is popular due to its rugged design and high flow capacity in an economical package. In its pilot operated regulator design, the M4500 handles up 250 psig, [17.0 BAR], (1700 kPa) supply pressure and has five available signal to output ratios to meet most control element requirements. The Fairchild Model 4500 Booster provides a flow capacity of 150 SCFM (255 m3/HR), which equates to a Cv factor of approximately 3.0 in both forward and exhaust modes.

M4500A Back Pressure Pneumatic Booster (M4500ABP) Fairchild’s M4500ABP is a High Flow Back Pressure Booster designed for automation or remote controlling of the back pressure or relief operation typically found in tank systems and other pressurized systems. In its pilot operated design, the M4500ABP will operate from a signal pressure of up to 150 psig [10.0 BAR] (1000kPa) and handles up 250 psig, [17.0 BAR], (1700 kPa) system pressure. The Fairchild Model 4500ABP Back Pressure Booster provides a flow capacity of 150 SCFM (255 m3/HR), which equates to a Cv factor of approximately 3.0.

Model 4800A - 500 SCFM [850 m3/HR] Forward/Exhaust High Flow No Bleed Volume Booster with Bypass Valve (M4800A) Fairchild’s M4800A is a High Flow Pneumatic Volume Booster specifically designed for Valve and valve actuation systems. With its Cv of 9 in both forward and exhaust modes, this pilot operated booster provides fast response and accurate control for valve actuation. In addition, the M4800A has an integral bypass valve, for optimum tuning and adjustment, even while in operation, to obtain maximum performance on opening and closing times with minimal overshoot or oscillation. In its pilot operated regulator design, the M4800A handles up 250 psig, [17.0 BAR], (1700 kPa) supply pressure and delivers an output pressure up to 150 psig [10.0 BAR] (1000kPa). The Fairchild Model 4800A Booster provides a flow capacity of 500 SCFM (850 m3/HR), which equates to a Cv factor of approximately 9 in both forward and exhaust modes.

Model 4900A - 500 SCFM [850 m3/HR] Forward/Exhaust High Flow No Bleed Volume Booster (M4900A) Fairchild’s M4900A is a High Flow Pneumatic Volume Booster designed for high precision applications. With its Cv of 9 in both forward and exhaust modes, this pilot operated booster provides fast response, very low deadband and high precision control. In its pilot operated regulator design, the M4900A handles up 250 psig, [17.0 BAR], (1700 kPa) supply pressure and delivers an output pressure up to 150 psig [10.0 BAR] (1000kPa). The Fairchild Model 4900A Booster provides a flow capacity of 500 SCFM (850 m3/HR), which equates to a Cv factor of approximately 9 in both forward and exhaust modes.

Model 200 - 1800 SCFM [3058 m3/Hr] Forward Ultra High Flow Volume Booster (M200) The Model 200 Pneumatic Volume Booster reproduces a pneumatic signal in a 1:1 ratio. It is ideally suited for systems that require input isolation or increased forward flow capacity. This device uses a force balance system to control the movement of the supply and exhaust valves. As a pilot operated regulator design, the Fairchild Model 200 handles up to 250 psig, [17.0 BAR], (1700 kPa) supply pressure and provides a flow Ultra high flow capacity of 1800 SCFM (3058 m3/HR), which equates to a Cv factor of approximately 18 in forward flow mode.

Model 200XLR - 1800 SCFM [3058 m3/Hr] Forward/Exhaust Ultra High Flow Volume Boosters (M200XLR) Based on the Model 200 valve body, the Model 200XLR Volume Booster couples two identical units to obtain ultra high flow capacity in both forward and exhaust modes. As a pilot operated regulator design, the Fairchild Model 200XLR handles up to 250 psig, [17.0 BAR], (1700 kPa) supply pressure and provides a flow Ultra high flow capacity of 1800 SCFM (3058 m3/HR), which equates to a Cv factor of approximately 18 in both forward and exhaust flow modes.