Bộ Chuyển Đổ Tín Hiệu Thiết Bị Hãng Status Pod-3000-03 Rmk/3000 Acc4000/01 Opt-3600-02/01 Tfml Dm640/P Dm640/Tc Dm640X/P Dm640X/Tc Sch4/*/0 Sch15/A
Liên hệ
D3, Kdc Miếu Nổi, Đinh Tiên Hoàng, P.3, Q.bình Thạnh
ANS Việt Nam là công ty XNK hàng đầu và là nhà cung cấp chuyên nghiệp các mặt hàng “Máy móc và các thiết bị, dụng cụ đo lường, kiểm tra công nghiệp/điện-tự động hóa”
Hãy cung cấp thông tin về bất cứ sản phẩm bạn đang cần, chúng tôi bảo đảm về chất lượng, dịch vụ và giá cả tổt nhất.
Hãy liên hệ với chúng tôi để có giá tốt nhất.
0938.214.498 / 0986.025.980 |Mr Cảnh|
Email: canh.ans@ansvietnam.com
Công ty chúng tôi là đại diện phân phối của hãng Status các sản phẩm sau:
| Part Number | Description |
| SEM203/P | Push Button Configuration. Pt100 Input |
| SEM203/TC | Push Button Configuration. Thermocouple Input |
| SEM206/P | PC Programmable Pt100 input |
| SEM206/TC | PC Programmable Thermocouple input |
| TTR200 | PC Programmable for Multi RTD and Slidewire Sensors |
| TTC200 | PC Programmable for Multi Thermocouple and mV Sensors |
| TTR200X | PC Programmable for Multi RTD and Slidewire Sensors. ATEX and IECEx Approved |
| TTC200X | PC Programmable for Multi Thermocouple and mV Sensors. ATEX and IECEx Approved |
| SEM210 | PC Programmable for Pt100, Thermocouple, Slidewire, mV Sensors |
| SEM210X | PC Programmable for Pt100, Thermocouple, Slidewire, mV Sensors. ATEX Approved |
| SEM310 | HART Protocol Pt100, Thermocouple, Slidewire, mV Sensors |
| SEM310X | HART Protocol Pt100, Thermocouple, Slidewire, mV Sensors. ATEX and FM Approved |
| HTR200 | PC Programmable for Multi RTD and Slidewire Sensors - M10 Sensor Entry |
| HTR201 | PC Programmable for Multi RTD and Slidewire Sensors - 1/8" BSP Sensor Entry |
| HTR200V | PC Programmable for Multi RTD and Slidewire Sensors. Voltage Output - M10 Sensor Entry |
| HTR201V | PC Programmable for Multi RTD and Slidewire Sensors. Voltage Output - 1/8" BSP Sensor Entry |
| SEM710 | PC Programmable For Pt100 and Thermocouple Sensors. Housed in SCH4 cap with display. |
| SCH4/*/0 | SCH4 Base, Less cap - for use with SEM710 |
| SCH15/F | SCH15 Enclosure Stainless Steel - Dual Side Entry For Use With SEM710 |
| SCH15/F/W | SCH15 Enclosure Stainless Steel - Dual Side Entry - Wall Mount For Use With SEM710 |
| SEM110/P/TC/W/Z | High Accuracy analogue (4 to 20) mA transmitter |
| SEM110/X | I.S Version of SEM110, ATEX approved |
| SEM104P | Pt100 Input, Solder Link / Potentiometer Configurable |
| SEM104TC | Thermocouple Input, Solder Link / Potentiometer Configurable |
| MTL7787+ | DIN Rail Mounted safety Barrier |
| MTL5541 | Repeater Power Supply For 2/3 wire Transmitters In A Hazardous Area |
| MTL5544 | Dual Chanel Repeater Power Supply For 2/3 wire Transmitters In A Hazardous Area |
| WTX700/SCH4/B | PC Programmable Head Mount Wireless Transmitter Universal Input - SCH4 B Head 707060 |
| WTX700/SCH4/C | PC Programmable Head Mount Wireless Transmitter Universal Input - SCH4 C Head 707060 |
| WTX700/SCH11 | PC Programmable Head Mount Wireless Transmitter Universal Input - SCH11 Head 707060 |
| WRX900/04/S1 | DIN Rail Mount Receiver for up to 16 WTX700 4 x mA (110 to 240)V AC 902931 |
| WRX900/04/S2 | DIN Rail Mount Receiver for up to 16 WTX700 4 x mA (20 to 30)V DC 902931 |
| WRX900/22/S1 | DIN Rail Mount Receiver for up to 16 WTX700 2 x mA, 2 x Rly (110 to 240)V AC 902931 |
| WRX900/22/S2 | DIN Rail Mount Receiver for up to 16 WTX700 2 x mA, 2 x Rly (10 to 30)V DC 902931 |
| WRX900/ANTENNA | Antenna Extension Kit for WRX900 |
| WIRELESS CONFIG KIT | USB Configuration Kit for WTX700 & WRX900 |
| SEM213/P | Push Button Configuration. Pt100 Input |
| SEM213/TC | Push Button Configuration. Thermocouple Input |
| SEM1603/P | PC Programmable Pt100 input |
| SEM1603/TC | PC Programmable Thermocouple input |
| SEM1610 | PC Programmable Pt100, Thermocouple, Passive Current, mV input |
| SEM215 | PC Programmable for Pt100, Thermocouple, Slidewire, mV Sensors |
| SEM315 | HART Protocol Pt100, Thermocouple, Slidewire, mV Sensors |
| RCP2-KIT-UK | Kit (HART Modem, Load Module, software, PSU & carry case) |
| RCP2-KIT-EUR | As above with plug for European use |
| RCP2-KIT-USA | As above with plug for USA use |
| RCP2-KIT-AUS | As above with plug for Australian use |
| SEM1000 | (4 to 20) mA Loop Isolator |
| SEM1010 | Provides Isolated Power For A Transmitter Derived From A Powered Loop |
| SEM1015 | (-10 to 100) V DC Input. Loop Powered (4 to 20)mA Output |
| SEM1020 | Isolating (4 to 20)mA Loop Booster |
| SEM1200 | Isolating Signal Splitter - Passive Outputs |
| SEM1300 | 110 to 240 VAC Input. 24 VDC @ 250 mA Output |
| MED2911 | 85...265V AC / 120…300VDC Input 24 VDC @ 1Amp Output DIN Rail Power Supply |
| SEM1600T | PC Programmable for Multi RTD / Thermocouple / Slidewire Sensors. Voltage, Bipolar Voltage or Current (Active / Passive) Output |
| SEM1600VI | PC Programmable for (-50 to 50)mA (Active / Passive) or (-50 to 50) V DC Input. Voltage, Bipolar Voltage or Active / Passive Current Output |
| SEM1620 | PC Programmable Pt100, Thermocouple, Passive Current,mV input. Voltage Output. 24V DC |
| SEM1630 | PC Programmable Pt100, Thermocouple, Passive Current,mV input. 2 x Trip Output |
| SEM1633 | PC Programmable for Multi RTD and Slidewire Sensors. 2 C/O x Trip Output |
| SEM1636 | PC Programmable Loop Powered Alarm Unit. 2 C/O x Trip Output |
| SEM1700 | PC Programmable for Pt100, Thermocouple, Slidewire, Current(active passive) , Voltage Sensors. Voltage, Current (Active / Passive) and 2 x Trip Output |
| SEM1100/S1 | Powered Process Signal Isolator / Convertor (90 to 253V AC) |
| SEM1100/S2 | Powered Process Signal Isolator / Convertor (20 to 35V DC) |
| MED2100 | Single Universal Input with Display - RS485 Modbus Output |
| MED2111 | Single Universal Input with Display & two Passive Current and Modbus Output |
| MED2122 | Single Universal Input with Display and Twin C/O Relay And Modbus Output |
| MED2113 | Single Universal Input with Display, mA & Twin N/C Relay and Modbus Output |
| MED2133 | Single Universal Input with Display& Two Twin N/C Relay and Modbus Output |
| MED2200 | Dual Universal Input - Modbus Output |
| MED2211 | Dual Universal Input with Two Passive Current and Modbus Outputs |
| MED2213 | Dual Universal Input with mA & Twin N/C Relay And Modbus Output |
| MED2222 | Dual Universal Input with Two C/O Relay And Modbus Outputs |
| MED2233 | Dual Universal Input with Two twin N/C Relay And Modbus Outputs |
| MED2300 | Single Frequency Input with Display - Modbus Output |
| MED2311 | Single Frequency Input with Display and Two Passive Current and Modbus Outputs |
| MED2322 | Single Frequency Input with Display& Two C/O Relay And Modbus Outputs |
| MED2313 | Single Frequency Input with Display, mA & twin N/C relay and Modbus Outputs |
| MED2333 | Single Frequency Input with Display & two twin N/C relay and Modbus Outputs |
| MED2400 | Dual Frequency Input - Modbus Output |
| MED2411 | Dual Frequency Input with Two Current and Modbus Outputs |
| MED2413 | Dual Frequency Input with mA & Twin N/C Relay and Modbus Outputs |
| MED2422 | Dual Frequency Input with Two C/O Relay and Modbus Outputs |
| MED2433 | Dual Frequency Input with Two Twin N/C Relay and Modbus Outputs |
| MED2911 | 85...265V AC / 120…300VDC Input 24 VDC @ 1Amp Output DIN Rail Power Supply |
| MED2921 | Isolated RS232 to 485 Convertor - Mountable Version |
| MED2922 | Non-Isolated RS232 to RS485 Convertor |
| MED2923 | USB RS485 Isolated Convertor - Desk Top Version |
| M-SCADA | Chart Recording Software |
| TFML | Writing Custom Maths Functions For MEDACS and DM3600/01 |
| DM3410/S* | Panel Meter Suitable for Pt100 / Thermocouple Sensors. |
| DM3420/S* | Panel Meter Suitable for Current (active / passive) or Voltage Inputs |
| DM3430/S* | Panel Meter Suitable For True RMS Voltage and Current Measurement |
| DM3600/U/00/S* | Panel Meter Suitable For Pt100, Thermocouple, Voltage, Current (active, passive) signals |
| DM3600/U/01/S* | As above but with Modbus Comms. TFML Compatible |
| DM3600/A/00/S* | Panel Meter With Flow and Totalise Functions |
| DM3600/A/01/S* | As above but with Modbus Comms. TFML Compatible |
| POD-3000-02 | 2 X Mains rated trip relays |
| POD-3000-03 | Isolated Analogue re-transmission (Active / Passive) |
| RMK/3000 | DM3000 series DIN rail mounting kit |
| ACC4000/01 | IP67 Wall Mount Housing for DM3000 / 4500 Series |
| OPT-3600-02/01 | DIN Rail Mount Comms Bus Link Terminal Board |
| TFML | Custom Maths Functions For DM3600/01 |
| DM640/P | Battery Powered Indicator with Pt100 Input Cap Only |
| DM640/TC | Battery Powered Indicator with Thermocouple Input Cap Only |
| DM640X/P | ATEX Approved Battery Powered Indicator Pt100 Input Cap Only |
| DM640X/TC | ATEX Approved Battery Powered Indicator TC Input Cap Only |
| SCH4/*/0 | Base Only, Less cap - Std Grey ABS for use with DM640 Series |
| SCH15/A | SCH15 Enclosure Stainless Steel - M16 x 1.5 Side Entry For Use With DM640 ( Not ATEX) |
| SCH15/A/W | SCH15 Enclosure Stainless Steel - M16 x 1.5 Side Entry - Wall Mount For Use With DM640 (Not ATEX) |
| SCH15/C | SCH15 Enclosure Stainless Steel - M16 x 1.5 Rear Entry For Use With DM640 ( Not ATEX) |
| SCH15/C/W | SCH15 Enclosure Stainless Steel - M16 x 1.5 Rear Entry - Wall Mount For Use With DM640 ( Not ATEX) |
| DM660P/A | Battery Powered Indicator Suitable For Pt100 Sensors - M16 x 1.5 Side Entry |
| DM660P/B | Battery Powered Indicator Suitable For Pt100 Sensors - Wall Mount M16 x 1.5 Side Entry |
| DM660P/C | Battery Powered Indicator Suitable For Pt100 Sensors - M16 x 1.5 Rear Entry |
| DM660P/D | Battery Powered Indicator Suitable For Pt100Sensors - Panel Mount M16 x 1.5 Rear Entry |
| DM500/F | Loop Powered Indicator (4 to 20) mA St/St Housing - Stainless Steel Dual Side Entry m16 X 1.5. |
| DM700/I | Loop Powered Indicator (4 to 20) mA Input Cap Only |
| DM700X/I | ATEX Approved Loop Powered Indicator (4 to 20) mA input Cap Only |
| SCH4/*/0 | Base Only, Less cap - Std Grey ABS for use with DM700 |
| DM720 | Panel Mount Loop Powered Indicator Push Button Configuration |
| SEM161D/H01 | Duct Mount 120mm. Single Channel. |
| SEM161D/H01/DP | Duct Mount 120mm. Single Channel With Display |
| SEM161D/H02 | Duct Mount 250mm. Single Channel. |
| SEM161D/H02/DP | Duct Mount 250mm. Single Channel. With Display |
| SEM161D/H03 | Duct Mount 530mm. Single Channel |
| SEM161D/H03/DP | Duct Mount 530mm. Single Channel With Display |
| SEM161R/H01 | Remote Sensor Mounting. Sensor Cable 2M |
| SEM161R/H01/DP | Remote Sensor Mounting. Sensor Cable 2M With Display |
| SEM161R/H02 | Remote Sensor Mounting. Sensor Cable 5M |
| SEM161R/H02/DP | Remote Sensor Mounting. Sensor Cable 5M With Display |
| SEM161W/H | Wall Mount. Single Channel. Sensor 110mm |
| SEM161W/H/DP | Wall Mount Single Channel Sensor 110mm With Display |
| SEM162D/HP01 | Duct Mount 120mm. Dual Channel. |
| SEM162D/HP01/DP | Duct Mount 120mm. Dual Channel. With Display |
| SEM162D/HP02 | Duct Mount 250mm. Dual Channel. |
| SEM162D/HP02/DP | Duct Mount 250mm.Dual Channel.With Display |
| SEM162D/HP03 | Duct Mount 530mm. Dual Channel. |
| SEM162D/HP03/DP | Duct Mount 530mm Dual Channel. With Display |
| SEM162R/HP01 | Remote Sensor Mounting. Dual Channel. Sensor Cable 2M |
| SEM162R/HP01/DP | Remote Sensor Mounting Dual Channel. Sensor Cable 2M c/w Display |
| SEM162R/HP02 | Remote Sensor Mounting Dual Channel. Sensor - Cable 5M |
| SEM162R/HP02/DP | Remote Sensor Mounting Dual Channel. Sensor Cable 5M c/w Display |
| SEM162W/HP | Wall Mount Dual Channel. Sensor 110mm |
| SEM162W/HP/DP | Wall Mount Dual Channel. Sensor 110mm With Display |
| HUMICHIP | Replacement Humidity / Temperature Sensor For SEM161/2 |
| MOUNTING GLAND | Mounting Gland For Duct and Remote Mount SEM161/ SEM162 41-800-0039-01 |
| FR125 | Replacement Wire Mesh Protection Filter For SEM161/2 |
| RHCheck161/2/0.5 | 0.5 % RH Check Capsule for SEM160 Series |
| RHCheck161/2/75 | 75 % RH Check Capsule for SEM160 Series |
| USB-CONFIG-MKII | USB Configuration Kit - Mark II |
| 48-200-0001-01 | USB Cable A/M to MINI B/M |
| STA206/50 | 50mm immersion, 1/2" bsp Process Connection, DIN43650 electrical Connection |
| STA206/100 | 100mm immersion, 1/2" bsp Process Connection, DIN43650 electrical Connection |
| STA206/150 | 150mm immersion, 1/2" bsp Process Connection, DIN43650 electrical Connection |
| STS1 | Up to 250mm Immersion, 1/2" BSP Process Connection, 6mm Stem Diameter. |
| STS2 | Up to 250mm Immersion, 6mm Stem Diameter. Typically used with compression gland or Style 2 pocket |
| STS3 | Up to 250mm Immersion 1/2" BSPT Process Connection, With Spring Loaded Inset Sensor |
| STS4 | Up to 250mm Immersion with 6mm Stem diameter. 1M Cable. Typically used with compression gland or Style 2 pocket |
| STS5/50 | 50 mm Length, 1M Cable |
| STS6 | UP To 250mm, 6mm Stem Diameter. Used With SCH Connection Head |
| STS7 | 50 mm Immersion With Protection Against Direct Sun Light |
| STS8 | Up to 200 mm Immersion 12.7mm diameter. Typically used with compression gland or style 2 pocket |
| STS9 | Up to 200mm Immersion. 1/2" BSP Process Connection, 6mm stem diameter |
| STS10 | Up to 250mm Immersion, 6mm diameter. 3/4" Male Running Nut |
| STS11 | Up to 250mm Immersion, 6mm diameter. 3/4" Female Running Nut |
| STS12 | 1" ISS, RJT, DIN, SMS Up to 250mm |
| STS12 | 11/2" ISS, RJT, DIN, SMS Up to 250mm |
| STS12 | 2" ISS, RJT, DIN, SMS Up to 250mm |
| STW1 | To suit probes upto 250mm immersion. 3/4" BSP Process Connection 7.9mm stem diameter |
| STW2 | To suit probes up to 250mm immersion. 1/2"BSPT Process Connection and 1/4"BSP Compression Fitting |
| STW3 | To suit probes up to 250mm immersion. Weld In Type - No process connection |
| STW4 | To suit probes up to 250mm. 3/4" BSP Process connection. Solid Turned For High Impact Protection |
| PA | Class A Sensor |
| P10 | 1/10th DIN Sensor |
| Duplex | Duplex Pt100 Sensor |
| PTFE Cable | Ptfe Cable per metre |
| Armoured Cable | Stainless Steel Convolute per metre |
| PROBE ACCESSORIES | |
| COMPRESSION GLANDS | |
| 34-101-9920-00 | ¼" BSP x 6.0mm Bore Stainless Steel |
| 34-111-9920-01 | ¼" BSPT x 6.0mm Bore Stainless Steel |
| 34-103-9920-00 | ½" BSP x 6.0mm Bore Stainless Steel |
| 34-113-9920-01 | ½" BSPT x 6.0mm Bore Stainless Steel |
| CONNECTION HEADS | |
| SCH4/*/0 | Base Only, less cap - std grey ABS |
| SCH4/*/L | Head c/w low cap - std grey ABS |
| SCH4/*/D | Head c/w high cap - std grey ABS |
| 31-341-1987-01 | SCH11 Screw Top Aluminium For Use With SEM110 Transmitter / CB connection blocks |
| 31-341-1987-02 | SCH11 Screw Top Aluminium For Use With SEM200,300 and TT Series Transmitters |
| SCH15/A | SCH15 Enclosure Stainless Steel - Standard Side Entry |
| SCH15/A/W | SCH15 Enclosure Stainless Steel - Standard Side Entry - Wall Mount |
| SCH15/C | SCH15 Enclosure Stainless Steel - Rear Entry |
| SCH15/C/W | SCH15 Enclosure Stainless Steel - Rear Entry - Wall Mount |
| SCH15/F | SCH15 Enclosure Stainless Steel - Dual Side Entry |
| SCH15/F/W | SCH15 Enclosure Stainless Steel - Dual Side Entry - Wall Mount |
| SCH50A/L/0 | ExD Head 1 x Side Entry 1 x Base Entry Aluminium |
| SCH50A/L/W | ExD Head 1 x Side Entry 1 x Base Entry and Display Window Aluminium |
| SCH50S/L/0 | ExD Head 1 x Side Entry 1 x Base Entry St/Steel |
| SCH50S/L/W | ExD Head 1 x Side Entry 1 x Base Entry and Display Window St/Steel |
| SCH51A/L/0 | ExD Head 2 x Side Entry 1 x Base Entry Aluminium |
Chúng tôi rất mong được hợp tác thành công và vui vẻ với Quý khách!
Võ Hồng Cảnh |Canh Mr|
I Sales Eng . I
====================
I cellphone I +84 986025980
+84 938214498
I email I canh.ans@ansvietnam.com
HẾT HẠN
0938 214 498
| Mã số : | 8295601 |
| Địa điểm : | Hồ Chí Minh |
| Hình thức : | Cần bán |
| Tình trạng : | Hàng mới |
| Hết hạn : | 26/08/2020 |
| Loại tin : | Thường |
Để mua hàng an toàn trên Rao vặt, quý khách vui lòng không thực hiện thanh toán trước cho người đăng tin!
Gợi ý cho bạn
Bình luận